How to Open the Roewe 550 Key?
4 Answers
To open the Roewe 550 key, push forward to remove the top cover of the remote control, paying attention to the position of the locating lugs, then detach the plastic plug from the remote. Below is an introduction about Roewe: 1. Overview: Roewe (ROEWE) is an automobile brand under SAIC Motor Corporation Limited, launched in October 2006. 2. Origin: Roewe's automotive technology originates from Rover, which was previously acquired by SAIC, but it is an independent brand. The brand has developed rapidly since its establishment, with its products covering the mid-size and upper-mid-size car markets. 3. Brand: Roewe's brand slogan is 'Sophistication, Technology, and Realization,' reflecting SAIC's vision to inherit international automotive advanced technology with an innovative approach, focusing on civilian vehicle technology to create a new classic international brand with determination and confidence.
I often help friends with disassembling the Roewe 550 key. The structure is quite simple. There's a small groove or gap near the battery cover on the back. Use a small flathead screwdriver or a dedicated prying tool to gently pry it open—don't apply too much force to avoid scratching the plastic. Once opened, the cover can be lifted to reveal the button battery, usually a CR2032. Remember to take a photo of the battery orientation to avoid installing it backward. If you're replacing the battery, avoid touching the circuit board directly with your fingers, as sweat can cause a short circuit. The key buttons can get stuck easily, so clean off any dirt. Typically, the battery lasts about two years with regular use, saving you a trip to the dealership. After reassembling, press the cover firmly to ensure a tight seal and prevent water damage. The whole process takes about five minutes—just be careful.
I tried disassembling my Roewe 550 key fob myself and was quite nervous at first, afraid of breaking it. Locate the tiny seam on the back of the key, then slowly pry it open using a thin plastic tool like a credit card or fingernail—don't force it. Once the cover pops open, you'll see the interior where there's a button battery that needs replacing. Confirm it's a 3V CR2032 battery and align it correctly with the socket. Avoid squeezing internal circuits during disassembly. Button malfunction is often caused by dirt buildup—clean gently with a cotton swab before reassembly. Safety first: never use metal tools to prevent electric shock. The plastic key housing is prone to cracking; when reassembling, listen for the click sound to confirm proper alignment. I recommend checking the battery annually—don't wait until it's completely dead.
Removing the Roewe 550 key is not difficult: Pry open the small groove on the back, gently lift the shell with a thin tool, and replace the battery with CR2032 model. Be careful not to damage the circuit board and keep your hands clean. When reassembling, ensure the cover snaps tightly to prevent moisture. Common issues like unresponsive buttons can often be resolved by cleaning them.
