How to Open the Remote Control of Dongfeng Fengshen AX7 to Replace the Battery?
2 Answers
The method to open the remote control of Dongfeng Fengshen AX7 to replace the battery is as follows: 1. Remove the silver decoration of the key; 2. Use a flat-head screwdriver to pry open the key along the gap on the edge of the shell, then you can see the battery; 3. Take out the old battery and replace it with a new one; 4. Reassemble the shell in reverse order. The following is an introduction to Dongfeng Fengshen AX7: Dongfeng Fengshen AX7 is a compact SUV equipped with two engines, a 2.0L and a 2.3L naturally aspirated engine, with the 2.0L naturally aspirated engine having a maximum power of 110kw and the 2.3L naturally aspirated engine having a maximum power of 125kw.
Replacing the battery of the Dongfeng Fengshen AX7's remote control is not difficult, as I've done it myself several times before. There's usually a small gap on the back of the key. Gently pry it open with a fingernail or a coin—just be careful not to use too much force to avoid scratching the plastic. The battery is a common button-type CR2032, which is easy to find at auto parts stores or supermarkets. When replacing it, make sure your hands are clean to avoid getting grease on the contacts, which could cause poor connectivity. When installing the new battery, align the positive and negative poles correctly. After closing the cover, test the lock button to ensure it responds normally. Before the remote runs out of power, there are usually signs, such as reduced sensing distance or unresponsive buttons. It's a good idea to keep a couple of spare batteries at home just in case. This kind of small DIY task saves money on repair shop visits and hones your hands-on skills, but remember to handle it gently to avoid damaging the internal circuit components.
