How to Open the Rear Sunroof of a BMW 530?

1 Answers
Cara
07/30/25 3:30am
To open the rear sunroof of a BMW 530: 1. Press the sunroof switch, and the front and rear sunshades will open automatically; 2. Press the switch again to fully open the rear sunroof. The BMW 530 is equipped with a panoramic sunroof, which changes the traditional ventilation method. The incoming wind creates an airflow that draws out the stale air from the cabin. The BMW 530 is powered by high and low power 2.0-liter turbocharged engines. The low-power version of the 2.0-liter turbocharged engine delivers 184 horsepower and a maximum torque of 290 Nm, with a maximum power speed range of 5,000 to 6,500 rpm and a maximum torque speed range of 1,350 to 4,250 rpm. The high-power version of the 2.0-liter turbocharged engine produces 252 horsepower and a maximum torque of 350 Nm, with a maximum power speed range of 5,200 to 6,500 rpm and a maximum torque speed range of 1,450 to 4,800 rpm.
Was this review help?
8
1
Share
More Forum Discussions

How to Clear the Maintenance Reminder on Octavia?

The specific steps to clear the maintenance reminder on Octavia are as follows: 1. Turn off the ignition switch. 2. Press and hold the "0.0/SET" (reset/set) button on the instrument panel. 3. Turn on the ignition switch while keeping the "0.0/SET" (reset/set) button pressed with your left hand. 4. When the message "Confirm to reset the maintenance service data? Confirm to reset the vehicle condition inspection service data?" appears on the instrument panel display, release the "0.0/SET" (reset/set) button. 5. Press the "0.0/SET" (reset/set) button again to confirm (press once). 6. Check if the maintenance light has been reset. If not, you must start over from the beginning.
1
3
Share

How to Open the Fuel Tank Cap on a Land Rover Range Rover?

The Range Rover does not have a separate fuel tank cap switch. Simply press the fuel tank cap when the central locking is unlocked to open it. The Range Rover is a luxury all-terrain SUV under the Land Rover brand and serves as the flagship model. Below are some details about the Range Rover:1. The new Range Rover is equipped with three engines: a low-power version 3.0-liter twin-charged engine, a high-power version 3.0-liter twin-charged engine, and a 5.0-liter supercharged V8 engine. Both twin-charged engines combine a supercharger and a turbocharger, allowing the engine to switch between different charging methods based on operating conditions, thereby improving efficiency and power. These twin-charged engines in the new Range Rover also feature a 48V mild hybrid system to enhance fuel economy. All three engines are paired with an 8-speed automatic transmission (8AT), which offers smoother shifting and better reliability and durability.2. The new Range Rover uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone suspension consists of upper and lower wishbones connected by a link, which helps reduce body roll and improves wheel contact with the ground. The multi-link suspension is an evolution of the double-wishbone design, where the two wishbones are replaced with separate links.
4
5
Share

What is the real reason for the discontinuation of the Yuexiang V3?

The real reason for the discontinuation has not been publicly disclosed. One possible reason is the concerning product quality of the old Yuexiang V3, and another could be preparations for the launch of the new Yuexiang V3. Here is some extended information on why the Yuexiang V3 was discontinued: 1. One possible reason is the concerning product quality of the old Yuexiang V3. 2. There have been numerous complaints about the Yuexiang V3's quality, including excessively stiff suspension leading to severe bumpiness and shaking, engine vibrations, and abnormal noises from the transmission. 3. The discontinuation of the Yuexiang V3 may be in preparation for the launch of the new Yuexiang V3. Official spy photos of the new-generation Chang'an Yuexiang V3 have been released online. Stylistically, the overall design remains unchanged, with the only notable change being the front headlights, which have been redesigned to a sharper, more aggressive look, giving the car a more stylish and individual appearance. There is currently no information available regarding the powertrain specifications.
7
5
Share

How often should the timing belt of Changan Honor be replaced?

The replacement interval for the timing belt is clearly indicated in the vehicle's user manual and maintenance manual. Generally, it should be replaced when the vehicle reaches 60,000 to 80,000 kilometers. For the Changan Honor, it is recommended to replace the timing belt at 60,000 kilometers for optimal performance. Relevant information about the timing belt is as follows: 1. The timing belt is a rubber component, and one of the main characteristics of rubber is that it ages. Combined with normal wear, the timing belt must be replaced promptly when it reaches the specified time. 2. The timing belt is a crucial part of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. 3. If the timing belt suddenly breaks while driving, the engine valves and ignition system will fail to operate normally, causing the engine to stall abruptly. This can result in bent valve pushrods, dented piston tops, and even holes in the cylinder head.
13
2
Share

What brand is the transmission of the Sagitar?

The Sagitar uses a 7-speed dual-clutch transmission. More details about the dual-clutch transmission are as follows: 1. A dual-clutch transmission essentially consists of two sets of clutches in a car's transmission. The 7-speed dual-clutch transmission used by Volkswagen is further divided into dry and wet types. Currently, mainstream dual-clutch transmissions generally have six or seven gears, with seven gears referring to seven forward gears. 2. In terms of power, the Sagitar is equipped with 1.2T and 1.4T turbocharged engines. The 1.2T engine has a maximum power of 85kW and a maximum torque of 200 Nm, while the 1.4T engine has a maximum power of 110kW and a maximum torque of 250 Nm. 3. In terms of the transmission system, the engines are paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission.
8
2
Share

What are the differences between the 9th-generation Accord and the 9.5-generation Accord?

The main differences between the 9th-generation Accord and the 9.5-generation Accord are as follows: 1. Difference one: The light source of the headlights is different. The light emitted by the 9th-generation Accord's headlights appears granular, while the light from the 9.5-generation Accord's headlights appears striped. Additionally, the 9.5-generation Accord's light source is brighter and has a longer range. 2. Difference two: Powertrain. The 2.0L naturally aspirated engine in the 9.5-generation Accord 2.0 Luxury Edition has a maximum power of 114 and a maximum torque of 190. It uses multi-point electronic fuel injection, which is less prone to carbon buildup compared to direct injection engines. 3. Difference three: Chassis. The 9.5-generation Accord 2.0 Luxury Edition features a rear multi-link independent suspension, providing better ride comfort for rear passengers. 4. Difference four: Features. The 9.5-generation Accord 2.0L Luxury Edition comes equipped with ESP, tire pressure monitoring, auto hold, hill start assist, and parking radar, covering all mainstream configurations. The 9th-generation Accord does not have such high-end features. 5. Difference five: Exterior. The chrome area on the front grille of the 9.5-generation Accord is slightly smaller.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.