···
Log in / Register

How to Open the Rear Sunroof of a BMW 5 Series?

3 Answers
LaLorenzo
07/24/25 10:17pm
Method to open the rear sunroof of a BMW 5 Series: When pressing the sunroof switch, the front and rear sunshades of the automatic sunroof will safely open. Pressing the switch again will fully open the rear sunroof. The BMW 5 Series sunroof changes the traditional ventilation method, allowing wind to create an airflow that draws out the stale air inside the cabin. The domestic 5 Series is a premium sedan with dimensions of 4998mm in length, 1901mm in width, and 1559mm in height, and a wheelbase of 3108mm. The BMW 5 Series is equipped with a B48B20 engine, which features unique technologies such as a twin-scroll turbocharger to reduce turbo lag.
Was this review help?
13
5
Share
OMason
08/10/25 10:06am
As a long-term owner of the BMW 5 Series, I've found the operation of the rear sunroof to be quite intuitive. Typically, on the control panel on the rear ceiling, you'll find several buttons, one of which is specifically for the rear sunroof. Press that button once, and it will automatically open halfway; press it again to open it fully. If you need a slight tilt for ventilation, gently press and hold the button for a few seconds. I remember during summer trips with my family, the kids particularly enjoyed operating it this way—the cool breeze coming in was very pleasant. However, be careful not to open it too wide at high speeds, as the wind noise can be quite loud. Regularly cleaning the sunroof tracks is also important; for example, wiping away dust with a soft cloth can prevent jamming or leaks. If your car is a newer BMW 5 Series, the controls might also be integrated into the central screen, but I recommend starting with the physical buttons first. In short, give it a try—usually, you'll get the hang of it after a couple of attempts, and there's no need to worry about causing any issues.
Was this review help?
1
5
Share
Expand All
Blakely
09/26/25 6:13am
Having driven the BMW 5 Series for several years, I've grown accustomed to operating the rear sunroof. First, look at the overhead console area in the rear seats where there should be a set of control buttons. Press the button with the sunroof icon to open or close it. In some model years, the front seats can also control the rear sunroof, but I recommend letting rear passengers try it themselves. The operation is simple: press once to partially open, press again to fully open, and hold to adjust the tilt angle. A reminder: avoid sudden movements when the sunroof is open, as there's a risk of shaking during hard braking. Regularly check for any debris stuck in the tracks, and don't leave it open too long during rain to prevent water ingress. This feature is particularly useful on long trips, allowing rear passengers to get fresh air instantly. If the buttons don't respond, it might be a fuse issue – consult the user manual or try simply restarting the car.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Is it allowed to temporarily park while driving a motor vehicle in a tunnel?

When driving a motor vehicle in a tunnel, temporary parking is not allowed. Motor vehicles are prohibited from parking at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. Temporary parking of motor vehicles on the road should comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, and construction areas; 2. Parking is prohibited at intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations; 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (posts), and within 30 meters of these locations, except when using these facilities.
5
0
Share

Why is the spare tire pressure 420?

The spare tire pressure is 420 because the tire pressure during storage should be higher than the standard upper limit, but it should be adjusted to match the standard tire pressure of the original tires when in use. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, and potential tire bursts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to excessive rolling and abnormal heat generation; Weakens the function of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire bursts; Increases tire deformation, leading to sidewall cracks, flexing movements, excessive heat, rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area and accelerating shoulder wear.
3
2
Share

What Impact Does a Driver's Safe Driving Record Have?

Querying a driver's safe driving record serves to encourage safe driving practices. Below is expanded information regarding traffic violation handling: 1. Timeframe: Vehicle owners must address violations at the local traffic police station where the violation occurred. Failure to do so within 15 days will incur a late fee of 3% per day, although the total late fee will not exceed double the original fine amount. Early resolution helps avoid unnecessary penalties. 2. Verification method: The quickest and most effective way to confirm whether you have committed a violation is to inquire at the vehicle management office or traffic police station. Essential documents to bring include your driver's license, vehicle registration certificate, and ID card—all three are mandatory. It's also advisable to carry some cash, so that if a violation is found, you can promptly complete the necessary procedures.
7
2
Share

What grade of fuel should a normal car use?

Usually, the fuel grade label is marked on the fuel tank cap. The only criterion for selecting the gasoline grade is the compression ratio of the car engine. Generally, the higher the compression ratio, the higher the gasoline grade. Typically, when the compression ratio is between 7.5-8.0, 90-93 grade gasoline should be used; for a compression ratio of 8.0-8.5, 90-93 grade gasoline is suitable; when the compression ratio is 8.5-9.0, 93-95 grade gasoline should be selected; and for a compression ratio of 9.5-10.0, 95-97 grade gasoline is recommended. The manual clearly specifies which grade of gasoline to use. There is no mistake in following the manual's instructions. Generally, the higher the compression ratio, the higher the gasoline grade. However, a high compression ratio does not entirely mean that high-grade gasoline is required. With clever engineering, high-compression engines can also use lower-grade gasoline.
18
2
Share

Which is the Brake and Which is the Accelerator in a Motor Vehicle?

In a manual transmission vehicle, there are three pedals arranged from left to right: the first is the clutch, the second is the brake, and the third is the accelerator. The left foot controls the clutch, while the right foot controls the brake and accelerator. An automatic transmission vehicle has only two pedals, arranged from left to right: the brake pedal and the accelerator pedal, both controlled solely by the right foot. The brake system consists of brake calipers and brake pads installed on the wheel hubs, with a master brake cylinder installed in the driver's compartment. Brake cylinders can be hydraulic, pneumatic, or lever-type, and operating the master brake cylinder applies braking force to the moving vehicle. The accelerator controls the fuel injection volume of the engine. When the accelerator is pressed down, a larger fuel injection increases the engine speed, thereby making the vehicle move faster.
20
3
Share

Why is the Camry's daytime running light flickering?

Possible reasons for the flickering of the Camry's daytime running light: it could be due to poor contact between the fuse and the headlight plug, or poor connection between the cathode power supply and the wiring harness with the frame. The daytime running light automatically turns on after the vehicle is started and remains lit in any position of the light switch, with no option for manual shutdown. The purpose of daytime running lights is to make the vehicle more easily recognizable during daytime driving. The Camry has a length of 4885mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. In terms of exterior design, the Camry features a large trapezoidal horizontal grille, a streamlined body posture with a lower waistline, an extended roofline that increases rear headroom, and a dual-sided quad-exhaust design at the rear.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.