How to open the MMI in Audi A4L?

2 Answers
BellaRose
07/24/25 3:46pm
Audi A4L enters the MMI system by finding the vehicle system settings and then opening the MMI. The default initial interface is the 'Air Suspension' mode settings. There are four modes: high, comfort, automatic, and dynamic. Select and press the knob to activate the chosen mode.
Was this review help?
13
0
Share
DeCaleb
08/11/25 8:46am
I've been driving an Audi A4L for several years. Every time I get in and start the engine, I habitually look for that large round knob or the button labeled MMI on the center console, usually located near the air conditioning control panel. A gentle press lights up the screen, and the menu pops up. The key is that the car must be powered on or started; otherwise, the button won't respond. I find this system really convenient—once opened, I can directly adjust navigation or listen to music, saving time while driving. However, it's safer to operate when parked. Some models have indicator lights around the knob to show its status. If the screen doesn't respond, check if the vehicle is in Acc mode—it might be a startup issue. During regular maintenance, wipe the dust off the control panel to prevent buttons from getting stuck. In short, after forming a habit with these simple steps, I effortlessly activate the MMI every time I drive, enjoying the smart control experience inside the car.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Where is Audi produced?

Audi's production site is at the company headquarters: Ingolstadt, an industrial city in Bavaria, Germany, located on the banks of the Danube. Audi also has production plants in China (Changchun), Malaysia, South Africa, and other locations. Below is a detailed introduction about Audi: 1. The Audi Group includes the parent company and its subsidiaries, Audi Hungaria, quattro GmbH, as well as Lamborghini Automobili and Coworth Technology, Audi Brazil, and Audi Senna. 2. In 1969, Auto Union GmbH and NSU GmbH were renamed Audi-NSU Auto Union AG, and in 1985, it was officially renamed Audi AG. Currently, Audi AG has become a subsidiary of Volkswagen AG.
1
0
Share

How to Remove the Rear Seat of an Accord?

The method to remove the rear seat of an Accord is: There are two clips under the seat cushion. Slowly lift from one side of the rear seat until you can reach in with your hand, but it's not easy to remove because the clips contain steel wires inside. You need to firmly pinch them towards the middle with your hand, but be careful as they can break easily. Method to lift the rear seat: 1. Under the headrests on both sides of the rear seat, there is a switch. Press it and push forward. 2. The backrest can be folded. Open the trunk and look below the seat (if not visible, it might be under the seat) for a black strap. Pull it backward and lift the seat upward. 3. Hook the strap onto the headrest of the front seat, and adjust the tightness of the strap. In this case, it is recommended to contact the local 4S store for inspection and repair. Alternatively, negotiate with the 4S store or the manufacturer. You can report the issue to the relevant department, wait patiently, and ensure your phone and other communication devices are accessible for the manufacturer's staff to contact you.
7
5
Share

What to Do If You Don't Have Enough Driver's License Points?

Solutions for insufficient driver's license points are as follows: 1. Once the driver's license is deducted 12 points, the holder must apply to the vehicle management department to participate in a training course. After completing the training, they must pass the relevant subject exams to obtain a new driver's license. 2. If a driver has more than 12 points or multiples of the original 12 points deducted at once due to traffic violations, they must pass exams to regain 12 points per exam, and so on, until all deducted points are offset. 3. For drivers with fewer than 24 points deducted, after passing two exams and obtaining a new license, the remaining points will be deducted immediately.
1
0
Share

What brand is haval?

haval, also known as Haval Motors, is a subsidiary brand of Great Wall Motors. Operating parallel to the Great Wall brand, Haval primarily focuses on SUV models and operates with an independent logo, as well as separate systems for product development, production, and services. The brand specializes in the production and sales of SUVs, with its lineup including the H series, F series, and M series. Taking the Haval H6 as an example, this model is the flagship vehicle of the Haval brand. The dimensions of the car are 4640 mm in length, 1825 mm in width, and 1690 mm in height, with a wheelbase of 2680 mm. In terms of exterior design, the Haval H6 breaks away from the rugged off-road style of its predecessors, adopting a new design that appeals more to mainstream consumers, featuring an overall look that is both elegant and stable.
12
0
Share

How to Adjust the Time on Lavida?

Method to adjust the time on Lavida: 1. Insert the car key and start the engine; 2. Press and hold the protruding button in the middle of the instrument panel for 3 seconds until the clock on the display starts flashing, then release; 3. Once the clock on the display is flashing, use the button to adjust the hour by pressing it up or down; 4. After setting the hour, wait for about 2 seconds, then continue pressing the button up or down to adjust the minutes; 5. Once both the hour and minutes are set, the time on the display will flash simultaneously. Wait for 5 seconds until the time stops flashing, indicating the adjustment is complete. In terms of body dimensions, the Lavida measures 4600 mm in length, 1700 mm in width, and 1500 mm in height, with a wheelbase of 2610 mm. Exterior-wise, the front fascia design of the Lavida differs significantly from previous Volkswagen A-segment models, particularly with its unique teardrop-shaped headlights. The traditional Volkswagen grille and U-shaped front design are also prominently featured and carried forward in the Lavida.
6
2
Share

Where is the activated charcoal canister located in a car?

Activated charcoal canisters are positioned between the fuel tank and engine pipelines in vehicles, with installation locations varying across different car models. Some are mounted on the vehicle frame, while others are installed near the engine front cover. Typically, the fuel tank has only three pipes: the fuel supply pipe and return pipe both connect to the engine. By following the remaining pipe, you can locate the charcoal canister. The automobile engine's activated charcoal canister features three outlets: the upper two connect to the fuel tank and activated charcoal canister solenoid valve respectively, while the lower outlet vents to the atmosphere. The canister contains activated material. When the engine operates and the solenoid valve engages, the engine draws fuel vapors from the tank and steam adsorbed by the activated material into the intake manifold. When the engine is off or the solenoid valve disengages, fuel tank vapors enter the activated charcoal canister and get absorbed by the activated material.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.