How to Open the Hood of Wuling Hongguang?

2 Answers
ElizaLynn
07/25/25 4:23am
To open the front hood of the Wuling Hongguang, follow these steps: 1. Enter the driver's seat and locate the hood release lever. 2. Move to the front of the vehicle to check if the hood is already open; a visible gap between the hood and the body indicates it is open. 3. Lift the hood and secure it with the support rod. Below are the functions of the hood: 1. Protection for the engine and surrounding components. The hood is a crucial part of the vehicle, covering essential components such as the engine, electrical circuits, fuel system, braking system, and transmission system. Enhancing the hood's strength and construction helps protect against impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 2. Airflow management. For objects moving at high speeds, air resistance and turbulence around the object can significantly affect its trajectory and speed. The hood's design helps adjust the direction of airflow relative to the vehicle's movement and reduces the resistance caused by airflow, minimizing its impact on the vehicle.
Was this review help?
11
4
Share
DeEmery
08/10/25 5:22pm
I often drive the Wuling Hongguang, and opening the hood is actually quite simple. First, locate a small lever near the dashboard on the left side of the driver's seat—it usually says 'Hood' or has a car icon. Pull it firmly backward, and you'll hear a click. Then, step out of the car and go to the front. Under the middle part of the hood, there's a metal latch. Hook your finger in and lift it slightly to pop the hood open. Use the included support rod to keep it steady. If it doesn't open, check if you forgot to turn off the engine or if it's stuck due to positioning, like being on a slope or having too much dust buildup. During regular maintenance, I'd recommend checking the latch for rust—applying some lubricant can prevent issues. Remember to be gentle to avoid pinching your fingers or damaging parts. Safety first!
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Can I skip maintenance at the 4S store during the car's warranty period?

Vehicles generally come with a warranty period, during which major components such as the engine, transmission, and chassis suspension can be repaired or replaced free of charge at the manufacturer's authorized service stations (usually 4S stores) if they fail within a certain mileage or time frame. The warranty period is typically 3 years or 60,000 kilometers, 4 years or 100,000 kilometers, or even a lifetime warranty for some brands. When purchasing a car, 4S store staff often inform us that warranty services are only available if the vehicle is maintained at a 4S store during the warranty period. If maintenance is performed at an external auto repair shop, does it really mean automatic loss of warranty? In fact, the "Regulations on Motor Vehicle Maintenance" issued by the Ministry of Transport on January 1, 2016, clearly stipulates that manufacturers and 4S stores cannot refuse warranty services on the grounds that maintenance was not performed at an officially authorized shop. Except for the automobile manufacturer fulfilling the recall of defective automobile products and the "three guarantees" responsibility for automobile quality, no unit or individual may force or covertly force the designation of a maintenance operator. This regulation means that automobile manufacturers and dealers can no longer bind consumers to perform maintenance at 4S stores, and consumers can choose their own maintenance shops. The reason for the regulation is to break the monopoly of 4S stores in the auto repair and maintenance business and to address consumer concerns such as high maintenance costs at 4S stores, long driving distances, and excessive waiting times. However, in reality, when consumers claim for quality issues arising from maintenance not performed at a 4S store, disputes with 4S stores often occur. But not all 4S stores are so strict; many auto repair shops only require maintenance records to prove that the current vehicle failure was not caused by improper maintenance, allowing for a quality claim.
14
1
Share

How to solve the problem that the Mercedes lim is still on after being canceled?

The solution to the problem that the Mercedes lim is still on after being canceled is: 1. Press the one-touch start button of the Mercedes to start the vehicle; 2. Press the cncl button on the left keyboard area of the Mercedes multifunction steering wheel to turn it off. Taking the Mercedes GLC 2021 260L 4MATIC Dynamic model as an example, its length, width, and height are 4764mm, 1898mm, and 1642mm respectively, with a wheelbase of 2973mm. The vehicle is equipped with multi-link independent suspension both front and rear, and is powered by a 2.0t inline four-cylinder turbocharged engine with a maximum power of 145kw and a maximum torque of 320nm, matched with a 9-speed automatic manual transmission.
15
2
Share

Where is the Water Temperature Sensor Located on the Buick Excelle?

The location of the water temperature sensor on the Buick Excelle: It is situated at the engine's outlet pipe. The water temperature sensor is a device that provides the car with water temperature signals. Taking the Excelle 2020 15N Manual Elite as an example, the car has dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm. It is equipped with a 1.3L naturally aspirated engine, delivering a maximum power of 79kw and a maximum torque of 133nm. The front suspension type is MacPherson independent suspension, while the rear suspension type is a compound torsion beam non-independent suspension. The body structure is of a unibody type, with front-wheel drive as the driving method and electric power steering as the assistance type.
15
1
Share

What are the models of Michelin tires?

Here is a detailed introduction to the main Michelin tire models currently available in China: 1. Energy Series: Economical/durable/quiet and comfortable, suitable for small and medium-sized vehicles with 14-18 inch rims. The Energy series is Michelin's flagship economical and durable tire line. The XM1+ is positioned as economical and durable, while the XM2 focuses on durability and safety. Compared to the previous two, the MXV8 offers better comfort and quieter performance, making it more suitable for medium and large-sized vehicles. 2. Primacy Series: Quiet and comfortable/fuel-efficient/safe/handling-oriented, suitable for medium and large-sized vehicles with 15-19 inch rims. The Primacy series is Michelin's flagship quiet and comfortable tire line, mainly including Primacy LC, Primacy 3ST, and Primacy HP. The LC is positioned for quiet comfort and fuel efficiency, while the HP focuses on quiet comfort and strong handling performance. The latest Primacy 3ST emphasizes safety along with quiet comfort. 3. Pilot Series: High-performance/handling/safety, suitable for high-performance vehicles with 14-21 inch rims. The Pilot series represents Michelin's high-performance tires, mainly featuring five tread patterns: PP2, PS2, PS3, PSS, and CUP2. These four tires are positioned for high performance and handling, but they also have some drawbacks, such as excessive road noise, poor comfort, and wear indices around 300, indicating lower durability. 4. Latitude SUV Series: Latitude Tour HP, off-road/comfortable/wear-resistant, suitable for SUV models with 15-22 inch rims (excluding 21 inches). Michelin's SUV tires are mainly from the Latitude series, expanding Michelin's product coverage in the SUV tire market and providing more choices for luxury SUV owners.
7
2
Share

What is the reason for the Golf tire pressure warning but no visible abnormality in the tires?

Golf tire pressure warning but no visible abnormality in the tires is caused by: 1. Extremely slow tire leakage; 2. False alarm due to tire pressure system malfunction. The solutions are: 1. Monitor the tire condition at all times and go to the repair shop for inspection if necessary; 2. There is a SET button in the car control panel settings for tire pressure reset, which can manually turn off the warning light. Taking the Volkswagen Golf 2021 200TSI DSG as an example, this car belongs to the compact car category and is a 5-door, 5-seat hatchback with a length, width, and height of 4296mm, 1788mm, and 1471mm respectively. It is equipped with a 1.2T inline four-cylinder turbocharged engine, with a maximum power of 85kW, a maximum torque of 200Nm, a maximum horsepower of 116PS, and a top speed of 200km/h.
8
2
Share

What are the differences between the Crown 2.5 and 3.0?

The differences between the Crown 2.5 and 3.0: 1. Different body dimensions: The length, width, and height of the Crown 2.5 are 5020mm, 1805mm, and 1480mm respectively; the Crown 3.0 measures 5005mm, 1810mm, and 1505mm. 2. Different maximum power: The Crown 2.5 has a maximum power of 142kw, while the Crown 3.0 reaches 167kw. The similarities between the Crown 2.5 and 3.0 include a wheelbase of 2925mm, front and rear track of 1540mm, fuel tank capacity of 70 liters, and naturally aspirated intake form.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.