How to open the hood of the Roewe RX5?

[LeReed]

Method to open the hood of the Roewe RX5: 1. Pull the hood release handle inside the car; 2. Push the hood lock safety hook handle on the left side of the radiator grille to the right to release it. The Roewe RX5 is a compact SUV from Roewe. Taking the 2020 Roewe RX5 as an example, its body dimensions are: length 4556mm, width 1855mm, height 1719mm, with a wheelbase of 2700mm. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS and a maximum power of 124kW.

[Dustin]

As a long-time owner of the Roewe RX5, popping the hood requires first finding the release handle near your left leg in the driver's seat - give it a firm pull until you hear a 'click'. After exiting the vehicle, locate the central gap in the hood where you'll feel a metal latch inside. Push it leftward while simultaneously lifting the hood with your other hand. The trickiest part is the support rod concealed inside the hood - you'll need to position it vertically into its slot. Important reminder: never attempt this when the engine's hot - last time I waited five minutes after turning off the engine and still nearly got scalded by steam. Mastering this skill lets you top up windshield washer fluid yourself, saving trips to overcrowded repair shops.

[SadieRose]

Opening the hood of this car is indeed a simple two-step process: First, sit in the car and pull the lever marked with an engine symbol located at the bottom left. Second, walk to the front of the car, reach into the center of the hood, feel for the safety latch, and push it to the right. The key is to lift the hood quickly, as the latch might snap back if you're too slow. Make sure the support rod is securely and vertically locked in place, otherwise, it could fall and shatter the headlights. I always open it to check the oil and coolant levels myself, since the car wash attendants often forget to clean the engine bay. I recommend wearing gloves when doing this, as the metal edges can sometimes be sharp and cut your hands.

[HavenLee]

Opening the hood of the Roewe RX5 is basically a two-step process: First, pull the release lever under the driver's seat to unlock it, then walk to the front center of the car, feel for the safety latch, and push it open. Remember there's a black folding rod inside the hood—just pull it out and prop it into the hole. When checking tires, take a moment to wipe dust from the engine compartment and spray some anti-rust lubricant on chain-driven parts. Newbies, don’t forget to engage the handbrake and turn off the engine before operating.

[OLucille]

I commute with this car every day, and popping the hood is a quick process. Just sit down and pull the lever under the steering wheel, and the hood will pop open slightly. Don't hesitate when getting out—reach directly into the gap above the emblem, slide the metal latch to the left with your index finger, and simultaneously lift the hood with your right hand. Make sure the support rod clicks securely into place. After opening it, I always check the brake fluid and coolant levels—older car parts are the most prone to issues. If the engine is hot, wait at least ten minutes before working on it—those metal parts can blister your skin.