How to Open the Hood of the New Ford Focus?

2 Answers
VanZoe
07/24/25 1:51am
To open the hood of the new Ford Focus, follow these steps: Locate the hood release lever below the left side of the steering wheel and pull it upwards. You will notice the hood slightly popping up. Then, find the yellow button on the left side of the hood and turn it counterclockwise to lift the hood completely. The new Ford Focus is a compact car with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. In terms of suspension, the new Focus features a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. For powertrain options, the new Focus is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine.
Was this review help?
9
3
Share
VanEvelyn
08/10/25 9:31pm
As a long-term Ford Focus owner, I'm quite familiar with opening the front hood. First, sit in the driver's seat and locate the small release lever near your left knee area—it might be positioned below the steering wheel or at the edge of the instrument panel. Give it a firm pull, and you'll hear a click indicating it's unlocked. Then, exit the car and walk to the front of the vehicle where the hood is. Feel for a safety latch in the center-front area, usually orange or featuring a small tab. Press or slide it with your fingers while gently lifting the hood with your other hand. This two-step design in newer Focus models is for driving safety, preventing accidental opening at high speeds. Always ensure the car is parked, turned off, and the engine has cooled before checking under the hood to minimize burn risks. Make it a habit to regularly lubricate the latch (a quick spray of WD-40 works) to prevent rust and sticking—after all, the engine compartment requires consistent maintenance.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What are the items for a car's first maintenance?

Car first maintenance items include changing the engine oil and replacing the oil filter, followed by a comprehensive inspection of the vehicle, commonly referred to as a minor service. A major service refers to the routine maintenance performed at the time or mileage specified by the manufacturer, which includes replacing the engine oil, oil filter, air filter, and fuel filter. Car maintenance, also known as vehicle servicing, involves regular preventive work such as inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. Car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, etc., with the aim of keeping the vehicle clean, ensuring normal technical conditions, eliminating potential hazards, preventing faults, and extending the service life.
8
4
Share

What is the tire specification of the Highlander?

The tire specification of the Highlander is 245/60R18. Tires are often used in complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. The Highlander's length, width, and height are 4890mm, 1925mm, and 1720mm respectively, with a wheelbase of 2790mm. The front suspension type is MacPherson independent suspension, the rear suspension type is double-wishbone independent suspension, the steering assistance type is electric power steering, the body structure is unibody, and the parking brake type is foot brake.
15
4
Share

How to turn on the fog lights on the Audi Q3?

Audi Q3 turns on the fog lights by: setting the light button to the parking light or headlight position, pulling it out once for the front fog lights, and pulling it out again for the rear fog lights. The car fog lights can increase the running distance, improve the visibility of the driver and surrounding traffic participants, and allow oncoming vehicles and pedestrians to spot each other from a greater distance. The Audi Q3 is a compact SUV under FAW-Volkswagen Audi, with a length, width, and height of 4481mm, 1848mm, and 1616mm respectively, a wheelbase of 2680mm, a body type of 5-door 5-seat SUV, a 7-speed dual-clutch transmission, and a top speed of 200 kilometers per hour.
4
2
Share

What is domy car?

domy is Damai Auto, a compact SUV under the Zotye brand. Damai does not use the Zotye logo but instead adopts a new artistic 'domy' emblem. The Damai lineup includes models such as the Damai X5 and Damai X7. Taking the Damai X5 as an example: it measures 4527mm in length, 1836mm in width, and 1682mm in height, with a wheelbase of 2680mm. The body style is a 5-door, 5-seat SUV, equipped with a 5-speed manual transmission. The Damai X5 is powered by a 1.6L L4 engine with natural aspiration, delivering a maximum horsepower of 116ps, peak torque of 151nm, and maximum power output of 85kw.
11
1
Share

Is it okay to replace tires with different tread patterns?

Replacing tires with different tread patterns is not recommended. Different tread patterns can pose safety hazards while driving, as they result in varying friction coefficients and grip levels among the tires. During emergency braking, inconsistent braking performance may lead to skidding, endangering the driver's safety. Additionally, since the tread patterns are not identical, the water drainage capabilities of the tires will also differ, creating significant safety risks when driving in rainy conditions. One of the primary functions of tire tread patterns is to provide grip, and different patterns determine the grip levels of different tires. If a replacement tire has a tread pattern that differs from the others, it is highly likely to cause an imbalance in grip among the four tires during driving.
9
4
Share

How often should the gear oil of a sedan be changed?

The gear oil of a sedan should generally be changed every 40,000 kilometers. However, the specific replacement interval should be determined based on the manufacturer's user manual, as the service life of vehicle gear oil is influenced by various factors such as the vehicle model, oil quality, usage conditions, and driving habits. Gear oil primarily refers to the lubricating oil used in transmissions and rear axles, and it mainly functions to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. Automotive gear oil is used in gear transmission mechanisms such as steering systems, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubricating gears, resisting wear, cooling, dissipating heat, preventing corrosion and rust, cleaning, and reducing gear surface impact and noise.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.