How to Open the Hood of the Geely Vision X6?
3 Answers
The method to open the hood of the Geely Vision X6 is: Pull the lever located below the left side of the driver's door to release the hood. Taking the 2020 Geely Vision X6 as an example, its body dimensions are: length 4546mm, width 1834mm, height 1715mm, wheelbase 2661mm, fuel tank capacity 55L, trunk capacity 1735L, and curb weight 1550kg. The 2020 Geely Vision X6 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141PS, maximum power of 104kW, maximum torque of 235Nm, paired with a 6-speed manual transmission.
Opening the hood of the Emgrand X6 is quite simple. Every time I do it myself, I first make sure the car is turned off and parked steadily, and the engine has cooled down to prevent burns. Then, sitting in the driver's seat, there's a small lever near the floor by the left foot or under the steering wheel—this is the hood release lever. Give it a firm pull until you hear a click, which means it's unlocked. Get out of the car and walk to the front, bend slightly, and feel for a small metal switch or latch under the front edge of the hood. Gently flip or push it while lifting the hood with your hand. The Emgrand X6 usually has an automatic support strut, or you might need to manually lift a metal rod. The whole process takes just a few minutes, making it convenient for regular checks like oil, coolant, or adding windshield washer fluid. If it doesn't open, don't force it—check if the lever is stuck under the floor mat or if the switch is rusty, then spray some lubricant. Developing a habit of opening it once a month can help detect oil leaks or aging components early, extending the car's lifespan.
The hood opening method of the Geely Vision X6 is practical and straightforward. I often open it for minor maintenance tasks, such as topping up the washer fluid or checking the battery status. The operation involves two simple steps: First, locate the hood release handle inside the car on the driver's side near the footwell and pull it to release the latch. Then, move to the front of the car, find the secondary release switch under the hood's leading edge, press it, and gently lift the hood. The design is user-friendly with well-positioned components, making it easy for beginners to master after a couple of tries. As a side note, remember to clean engine dust and check belt tension after opening the hood to prevent unexpected malfunctions. Regular inspections offer numerous benefits, allowing DIY maintenance that saves on repair costs—especially crucial before highway driving. If the hood won't open, try jiggling the handle or switch gently to avoid damaging the paint with excessive force.
