How to Open the Hood of the Ford Everest?

What is the Break-in Period for a Car?

Car break-in period refers to the initial driving phase of a new car or after a major overhaul. Below is a detailed introduction to the break-in period: The break-in period for a car is generally 1000~1500 kilometers, which is the basic mileage required to ensure full contact, friction, adaptation, and shaping of mechanical components. During this period, the ability of various car parts to adapt to the environment can be adjusted and improved, and protrusions on the parts can be worn off. The quality of the break-in will have a significant impact on the car's lifespan, safety, and fuel efficiency. Although new cars have undergone a break-in before leaving the factory, the surfaces of the parts are still relatively rough. Additionally, there are certain deviations during processing and assembly, as well as some hidden defects that are difficult to detect. Moreover, many metal particles fall off between new parts and accessories. These metal particles not only increase wear between parts but also degrade the quality of the engine oil when they mix with it, affecting lubrication. The frictional resistance of new parts during operation is greater than during normal periods, and fuel consumption is also higher.

8

0

Share

How many kilometers can you drive when the vehicle prompts 'Change Engine Oil'?

When the vehicle prompts 'Change Engine Oil', here is a detailed introduction to the mileage that can be driven under different circumstances: 1. When the vehicle prompts 'Change Engine Oil Immediately', you can still drive approximately 10,000 kilometers. 2. For new cars under normal driving conditions, if synthetic oil is used, the oil can generally be changed every 10,000 kilometers, and some can even extend to 20,000 kilometers. Automotive maintenance professionals consider 'normal driving' to mean frequent highway driving with minimal stop-and-go traffic. 3. Engine oil is to a car what blood is to the human body, with the engine being the heart of the car. During engine operation, piston movement generates friction, and gasoline combustion in the cylinders can raise temperatures inside the engine to as high as 600°C, also producing metal particles and other waste from friction. 4. In such an extreme and harsh operating environment, engine oil plays a crucial role in lubricating, cooling, and cleaning the contaminants generated by engine friction, ensuring normal engine operation and extending the engine's lifespan.

9

2

Share

Is the Volkswagen Tiguan from FAW or SAIC?

The Volkswagen Tiguan belongs to SAIC's SUV models. The Volkswagen Tiguan features sharp and angular exterior lines, ample space, and is equipped with a panoramic sunroof. The trunk has a wide opening, and the interior is relatively conventional, with attention to detail in materials and craftsmanship. It also performs well in terms of fuel consumption, and the overall noise insulation is ideal. Here are some details about it: 1. Interior: The 2019 Tiguan L adopts Volkswagen's latest design language, with a polygonal design for the center console, moving away from the previous boxy and rigid style. The polygonal and multi-layered design highlights the sportiness and technological feel of the new Tiguan L. 2. Powertrain: The Tiguan L's 2.0T + 7-speed dual-clutch powertrain is already well-known and fully adequate for the vehicle's size. The turbo fully engages at around 1500 rpm, providing ample power feedback whether during acceleration or high-speed lane changes and overtaking. High-speed driving is generally maintained in the 80 km/h to 120 km/h range, with the engine and tire noise performance being quite ideal.

3

0

Share

What Causes Body Vibration After Accelerating by Pressing the Throttle?

Possible reasons for body vibration after accelerating by pressing the throttle are as follows: 1. Excessive carbon deposits and dirt near the throttle valve require timely cleaning. 2. Increased carbon deposits and dirt near the intake manifold, necessitating prompt cleaning of the intake manifold and inner channel walls. 3. Malfunction in the carbon canister area. 4. Low fuel pressure in the vehicle's engine, with clogged fuel injectors. 5. Issues with the engine's idle speed motor. 6. Problems in the engine's ignition system, requiring timely replacement of spark plugs. 7. Poor driving habits of the owner, with improper coordination between the clutch and throttle.

7

4

Share

How to Deal with Water Inside Headlights?

Methods for handling water in headlights are as follows: 1. First, inspect the headlight cover to check for any damaged areas. The presence of mist or water droplets inside the car's headlights indicates water ingress, and determining how the water entered the headlight is crucial. 2. If water ingress is due to a damaged headlight cover, the only solution is to drive to a repair shop for a replacement. If the headlight cover is intact, there's no need to worry. 3. Try to remove the water droplets and mist manually: You can drive the car outdoors and let it bask in the sun for half a day, relying on the sun's heat to evaporate the mist inside the headlights. If there's still residue, you can turn on the car's headlights. The headlights generate heat when turned on, which can also evaporate much of the mist. 4. Drive to a repair shop for inspection: Technicians can disassemble the headlights to clear out the mist and water droplets, check the headlights' sealing condition, and repair any damaged areas. They have the tools to inspect the headlight wiring and identify the source of the problem to properly fix the headlights.

16

5

Share

How to deal with cracked glass?

Check if it can be repaired, otherwise replacement is necessary. Whether damaged car glass can be repaired depends on two factors: 1. First, check the location of the damage point. Only damage in the whitish area of the glass can be repaired. If it's in a pitted or black adhesive area, it's unnecessary to repair, and it's recommended to replace the glass directly. 2. Second, assess the extent of the damage. If there are extended cracks within the main line of sight, it's advisable to replace the glass directly. If there are no extended cracks and the damage points are few and small, repair is possible. If there are extended cracks but they are not within the main line of sight and extend less than 10 cm, drilling and injecting adhesive to stop the cracks can be done. It's recommended to visit an auto beauty shop for an on-site evaluation to determine the best course of action.

2

Share

How to Open the Hood of the Ford Everest?

What is the Break-in Period for a Car?

How many kilometers can you drive when the vehicle prompts 'Change Engine Oil'?

Is the Volkswagen Tiguan from FAW or SAIC?

What Causes Body Vibration After Accelerating by Pressing the Throttle?

How to Deal with Water Inside Headlights?

How to deal with cracked glass?

How to Check the Manufacturing Date of a Vehicle?

How to troubleshoot Tianlong EECU malfunctions?

What should I do if the heating wire on the rear windshield of my car is broken?

How to Lock the Fuel Tank Cap of the New Jetta?