How to Open the Hood of the Buick Excelle?

1 Answers
TuckerDella
07/24/25 5:15am
The method to open the hood of the Buick Excelle: 1. Locate the hood release lever below the steering wheel on the left side, pull it upward to release, and then return it to its original position; 2. There is a safety latch in the middle front of the hood. Move the safety latch toward the driver's side of the vehicle and lift the hood to open it. The Buick Excelle is a premium mid-size car launched by SAIC-GM. In terms of body dimensions, the car measures 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. Power-wise, the Buick Excelle is equipped with a 1.4T DVVT turbocharged engine, delivering a maximum horsepower of 163 HP, a maximum power of 120 kW, and a maximum torque of 230 Nm, paired with a 6-speed automatic transmission.
Was this review help?
5
3
Share
More Forum Discussions

What are the effects of the three driving modes in the Elantra?

The effects of the three driving modes in the Elantra: 1. When the car is in Normal mode, the power output and air conditioning settings are automatically adjusted to an optimal state; 2. When the car is in Eco mode, fuel consumption reaches an optimal energy-saving state; 3. When the car is in Sport mode, the vehicle's power response becomes more rapid, the battery's energy output increases instantly, making the car's steering more responsive and enhancing driving pleasure. The Elantra is a model under Beijing Hyundai, with body dimensions of 4610mm in length, 1800mm in width, 1450mm in height, and a wheelbase of 2700mm.
9
3
Share

What Causes a Chevrolet Cavalier to Fail to Start?

There are several reasons why a Chevrolet Cavalier may fail to start: 1. Weak Battery: A weak battery can prevent the vehicle from starting, typically manifesting as the starter not working or turning over insufficiently when attempting to start. 2. Fuel Flow Obstruction: This usually appears as a lack of fuel pressure in the engine's fuel supply line. At extremely low temperatures, water mixed with debris can block the fuel line, causing the engine to fail to start. 3. Poor Ignition System Performance: In cold weather, the low intake temperature can lead to poor fuel atomization in the cylinders. Combined with insufficient ignition energy, this can result in cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the flammable concentration limit and preventing ignition.
6
0
Share

What are the methods to prevent rolling on flat ground?

Methods to prevent rolling on flat ground are: 1. The main reason for rolling is releasing the brake too early while the clutch is not fully engaged, leading to insufficient power. When starting, press the brake with your right foot and slowly lift the clutch with your left foot. 2. The engine gradually delivers torque to the wheels. As you slowly lift the clutch, the torque transmitted from the engine to the wheels increases until the clutch is fully engaged. Reasons for rolling include: 1. The handbrake is not pulled to the correct position—simply pull it to the specified position again. 2. If there is an issue with the handbrake's brake pads, use the foot brake to assist in stopping the vehicle. Once the vehicle is parked in a safe place, test the handbrake again. If it still fails to function, promptly visit a repair shop or 4S store for maintenance.
9
1
Share

What engine is equipped in the MU-X?

The MU-X is equipped with either a 1.9T inline 4-cylinder turbocharged engine or a 3.0T inline 4-cylinder turbocharged engine. Taking the 2020 2WD Jingyue Edition MU-X as an example, its body dimensions are: 4830mm in length, 1860mm in width, and 1830mm in height, with a wheelbase of 2845mm, a fuel tank capacity of 65 liters, and a curb weight of 1970kg. The 2020 2WD Jingyue Edition MU-X features a front suspension with a spiral spring double-wishbone independent suspension and a rear suspension with a five-link solid axle non-independent suspension. It delivers a maximum horsepower of 166PS, a maximum power of 122kW, and a maximum torque of 360Nm.
12
2
Share

What Happens If the Throttle Body Isn't Cleaned for 100,000 Kilometers?

If the throttle body isn't cleaned for 100,000 kilometers, carbon deposits will become severe, causing blockages that affect the engine's air intake. This can lead to issues such as rough idling, stalling, and unsteady acceleration with noticeable jerking. It is recommended to clean the throttle body every 20,000 kilometers. However, if the driving conditions are good and there are no symptoms like rough idling, cleaning it every 50,000 kilometers is also acceptable. There are two methods for cleaning the throttle body: one requires disassembly, while the other doesn't. If the throttle body isn't heavily soiled, it can be cleaned directly with a cleaning agent without removal. If it's heavily dirty, disassembling it for cleaning is more effective, though more time-consuming.
11
2
Share

What Tools Are Included in the Mercedes-Benz On-Board Tool Kit?

Mercedes-Benz tools include a tire wrench, lightweight jack, pry bar, various open-end and box wrenches, and a spark plug wrench. Here is some information about Mercedes-Benz: 1. Introduction to Mercedes-Benz: Mercedes-Benz is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes-Benz three-pointed star has become one of the most famous car brand logos in the world. Currently, it mainly produces C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class vehicles (SUV off-road vehicles). 2. Models eligible for government automobile consumption tax reduction: The 1.6L supercharged engine it is equipped with should not be underestimated in terms of power performance, with maximum power and torque reaching 115 kW and 230 N·m respectively, and a top speed of 223 km/h.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.