How to Open the Hood of a Toyota Corolla?

1 Answers
BethanyFitz
07/30/25 9:22am
Toyota Corolla hood opening method: The hood release button is located below the left side of the dashboard near the driver's seat. Pull the hood release switch, and the hood will slightly pop up. Then, release the auxiliary latch handle to the left and lift the hood. Insert the support rod into the slot to keep the hood open. The Toyota Corolla has a body length of 4635mm, width of 1780mm, height of 1455mm, and a wheelbase of 2700mm. It is equipped with a 1.2T turbocharged engine paired with a CVT transmission, delivering a maximum power of 85kW and a maximum torque of 185Nm.
Was this review help?
3
2
Share
More Forum Discussions

What to Do When the Engine Warning Light Comes On in a Honda Fit?

If the engine warning light comes on, you can follow these steps: First, check if the engine is running normally. Look for issues like shaking, black smoke emission, or difficulty starting. If any of these problems exist, avoid restarting the engine. Note: Do not restart the engine if the light is red. If the engine runs normally and the vehicle can be driven, proceed to a service center as soon as possible to diagnose the issue. A service center can easily read the fault codes using a portable diagnostic tool to identify the problem and perform targeted repairs. If the engine runs normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may reset the light. Generally, the engine warning light may come on due to the following seven reasons: Sensor Malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. If these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel or Oil Quality Issues: If the recommended fuel or engine oil is not used, it may cause engine wear, leading to the warning light illuminating. Poor Combustion of Air-Fuel Mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will turn on. Issues like faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the warning light. The most common problem is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: Blockages in the engine's intake system can cause the warning light to come on. A dirty or uncleaned air filter can lead to intake problems. Exhaust System Issues: Exhaust-related faults, such as a malfunctioning rear oxygen sensor, catalytic converter, or exhaust camshaft and bearings, can trigger the warning light. The catalytic converter is the most common culprit, often affected by leaded gasoline, improper oil additives, physical damage, or fuel system issues. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not operate properly, and the warning light will illuminate.
16
3
Share

Where is the door lock on the Ford Escort?

Ford Escort locks the doors through the central locking system, which is located on the center console panel. Here is some information about the Ford Escort: 1. Time: The Ford Escort was developed by Ford UK engineers in 1964. Mass production began in late 1967, and it debuted at the Brussels Motor Show in early 1968. 2. Dimensions: The length, width, and height are 4587*1825*1490mm, with a wheelbase of 2687mm. 3. Price: The manufacturer's suggested retail price ranges from 80,800 yuan to 116,800 yuan. 4. Power: Inline 3-cylinder gasoline engine with a top speed of 188km/h.
17
3
Share

How many gears does the M mode have?

M mode is the manual mode of an automatic transmission. The number of gears in M mode depends on the number of gears in the automatic transmission. The indicated speed represents the number of gears, for example, a 7-speed dual-clutch transmission has 7 gears. Generally, automatic transmissions have 6-speed, 7-speed, or 8-speed gears. The following are the gears of an automatic transmission: 1. P – Parking gear. 2. R – Reverse gear. 3. N – Neutral gear. 4. D – Drive gear. 5. L – Low gear. 6. OD – Overdrive gear.
18
4
Share

Is the Fit equipped with independent suspension?

The rear suspension of the Honda Fit is not an independent suspension; it uses a torsion beam non-independent suspension. Here is some information about the Fit: 1. Introduction: The Fit is a hatchback launched by GAC Honda, positioned as the third generation of the 'Cool Hatchback,' targeting the 'post-90s' generation who pursue individuality, with a spacious interior. 2. Powertrain: Equipped with Honda's new Earth Dreams Technology engine. The new 1.5L direct-injection DOHC i-VTEC engine delivers a maximum power of 96kW/6600rpm and a maximum torque of 155N·m/4600rpm, ranking first in its class for power performance.
5
4
Share

Which brand of tires does the Buick Excelle use?

Buick Excelle is equipped with Goodyear ASSURANCE ComfortTred series tires. The base model uses 195/65R15 tires, while mid-to-high trim models come with 205/55R16 tires. Below are the functions of automotive tires: 1. Support the vehicle's full weight, bear the car's load, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the vehicle's power performance, braking performance, and passability. 3. Work together with the vehicle suspension to cushion impacts during driving and dampen the resulting vibrations.
10
3
Share

What Causes the Steering Wheel to Make Abnormal Noises?

To determine the cause of abnormal noises when turning the steering wheel, first identify the source of the sound as follows: 1. Clock Spring: If the sound comes from inside the steering wheel, it is likely caused by interference from the clock spring inside. Remove the steering wheel, apply some grease to the clock spring, or replace it. 2. Shock Absorber: If the sound comes from outside the vehicle, it may be due to insufficient lubrication in the shock absorber's top bearing. Simply open the hood and listen to see if the sound originates from the shock absorber's top mount. 3. Stabilizer Bar Bushing: If the sound is not from the shock absorber's top bearing, then it is likely due to loose or damaged stabilizer bar bushings.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.