···
Log in / Register

How to Open the Hood of a Tiguan?

4 Answers
Lynda
07/28/25 8:07pm
The method to open the hood of a Tiguan is: 1. Below the steering wheel, on the outer side of the driver's left leg, locate the hood release handle. Pull the handle outward until you hear a 'pop' sound, which indicates the front hood has popped open slightly; 2. Move to the front of the car, above the Volkswagen logo, place your right hand palm up and insert four fingers; 3. Feel for a small black lever, hook it with your fingertips and lift upward to raise the hood, then secure it with the support rod. The Tiguan measures 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. It is a 5-door, 5-seat SUV with a 6-speed automatic transmission.
Was this review help?
1
3
Share
EmeryRose
08/11/25 11:52pm
I remember feeling a bit confused the first time I tried to open the hood of my Tiguan, fumbling around in the driver's seat. You have to get in the car, sit firmly, place your feet on the pedals, then bend down to find a small lever near the lower left corner of the steering wheel—that's the hood release handle. Give it a firm pull, and you'll hear a click as the hood pops open slightly. Then, get out of the car, walk to the front, crouch down, and reach into the gap of the hood to feel around. There should be a small metal lever slightly to the left of the center—press or lift it with your fingers, and the hood will fully open. Be careful not to do this when the engine is hot, as you might get burned. I learned that the hard way. Regularly checking the oil or coolant with the hood open is very practical; making it a habit can prevent minor issues.
Was this review help?
12
0
Share
Expand All
AllisonFitz
09/30/25 6:42am
As a long-time Tiguan driver, opening the hood is quite straightforward. From the driver's seat, use your left foot to reach the bottom where there's a hood release lever. Pull it, and the hood will pop open slightly. After getting out, go to the front of the car and press the secondary release under the hood's edge to open it fully. It's advisable to quickly check for any obstructions before each drive. If it doesn't budge, the cable might be frozen or worn, especially in winter. Regularly checking the fluid levels under the hood can extend your car's lifespan, and I always remind myself not to skip this routine.
Was this review help?
18
3
Share
Expand All
NaomiLynn
11/13/25 8:34am
Opening the hood of the Tiguan involves just two simple steps: First, sit in the driver's seat and pull the small lever on the left side to activate the release. Then, exit the vehicle and locate the secondary button under the hood, pressing it to fully open. Avoid performing this operation on a slope to prevent the vehicle from rolling and causing injury.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to Apply for a Refund at a Driving School?

Here is the introduction to applying for a refund at a driving school: 1. No medical examination: If you enroll but do not take the medical examination or fail the medical examination and request to drop out, a certain service fee will be deducted. 2. Passed the medical examination: If you pass the medical examination, obtain the driving school student status, but do not apply for the subject one test reservation and request to drop out, the file creation fee and service fee will be deducted. 3. Already reserved: If you have applied for the subject one test reservation at the driving management office, participated in the theoretical training organized by the driving school, but did not take the subject one test and request to drop out, the file creation fee, service fee, and theoretical training fees will be deducted. 4. Failed subject one: If you fail the subject one test and request to drop out, the file creation fee, service fee, and theoretical training fees will be deducted. 5. After on-car training: If you pass the subject one test, start on-car training, and then request to drop out, in addition to the file creation fee, service fee, and theoretical training fees, the actual on-car training fees will be deducted based on the training time (calculated according to IC card timing). 6. Passed subject two: If you pass the subject two test and request a refund before the road test, the tuition fee will not be refunded. If you are dissatisfied with the refund amount or cannot get a refund, you can complain to the local transportation bureau's driving school management department, complaint hotline 12328.
11
0
Share

Where is the tow hook on the new Focus?

Ford Focus front tow hook is located below the right front headlight. Nowadays, most cars are generally equipped with a tow hook system, and many car brands come with tow hooks from the factory. Tow hook locations for other models: The tow hook position for many sedans is designed at the lower part of the bumper. The exact location is usually marked in the vehicle user manual. Owners can also find a hidden space by inspecting the front and rear bumpers - the position covered by a round or square cap is where the car tow hook is located. Usage of tow rope: It's best to secure the tow rope to the vehicle chassis to distribute the force evenly.
20
4
Share

Where is the fuse box of Maxus T60 located?

Generally, the fuse box of most vehicle models is located next to the engine, in front of the steering wheel, and can be seen by opening the hood. Introduction to the fuse box: The automotive fuse box is used to install car fuses. According to the size of the installed fuses, it can be divided into: small automotive fuse box; medium automotive fuse box; large automotive fuse box. Material of the fuse box: Common injection molding materials include: plastic fuse box, bakelite fuse box. Each material has different high-temperature resistance levels. When selecting an automotive fuse box, factors such as the current rating of the fuse used and the size requirements of the fuse should be considered to choose the appropriate fuse box.
7
5
Share

What causes the timing belt of Honda 1.0t to shed fibers?

This issue occurs purely due to quality problems. Simply put, the manufacturer used substandard products from suppliers and released them to the market without rigorous testing. Introduction to timing belts: They are a crucial component of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft with a specific transmission ratio. Belts are used instead of gears for transmission because they produce less noise, have minimal self-variation, and are easier to compensate. Obviously, the lifespan of a belt is shorter than that of metal gears, so it must be replaced regularly. Regular maintenance of timing belts: As part of routine maintenance and comprehensive inspections, timing belt maintenance should be included in the regular maintenance schedule. Neglecting this, failing to inspect and replace faulty timing belts in time, can lead to serious consequences.
4
0
Share

What causes the noise from the lower control arm of the Mercedes-Benz C200L?

The noise from the lower control arm of the Mercedes-Benz C200L is caused by abnormal sounds from the engine or transmission. Engine noise: Engine noise indicates that the technical state of a certain mechanism in the engine has changed. This is mainly due to excessive wear of some parts or improper assembly and adjustment. Some noises can even forewarn of potential catastrophic engine damage. Therefore, when abnormal sounds occur in the engine, it should be repaired promptly to prevent further damage. Transmission noise: Since the transmission consists of many components, there are numerous potential causes for noise. If the transmission noise is noticeable, it is recommended to send the vehicle to a professional repair shop to identify the faulty component and replace it.
1
2
Share

How many RPM for Passat at 120 km/h?

Generally, for models with displacements ranging from 1.6L to 2.0L, the engine speed at 120 km/h is approximately around 3000 RPM, but this can vary depending on the vehicle's operating conditions. Different models have different RPMs: Vehicle speed is related to engine RPM, but these two are not directly proportional. The speed is determined by the transmission, and the conversion relationship between engine RPM and vehicle speed is: Vehicle speed = Engine RPM × Current gear ratio × Wheel circumference. The relationship between RPM and speed: Engine RPM and vehicle speed do not have a one-to-one correspondence; it also depends on the current gear, i.e., the transmission ratio. For example, at 2500 RPM, the corresponding speed in second gear and fourth gear will differ. Higher speed certainly means higher RPM, but higher RPM does not necessarily mean higher speed.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.