How to Open the Hood of a Mercedes-Benz Smart?

1 Answers
DiRiver
07/29/25 3:56pm
First, open the driver's side door of the Mercedes-Benz Smart. Pull up the handbrake of the Mercedes-Benz Smart to prevent the car from rolling. Firmly pull the hood release lever located on the left side of the driver's leg area. At this point, a noticeable gap will appear at the front hood, indicating that it has been released. Remove the safety latch, and then you can lift up the engine hood of the Mercedes-Benz Smart. Use the support rod to prop up the hood of the Mercedes-Benz Smart, ensuring it is securely supported to avoid any hazards.
Was this review help?
14
5
Share
More Forum Discussions

Is the oil drain plug tightened clockwise or counterclockwise?

Oil drain plugs are tightened counterclockwise. Below is relevant information about engine oil: 1. Definition: Engine oil, also known as engine lubricant, serves multiple functions for the engine including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the "lifeblood" of a car. 2. Precautions: Never use an adjustable wrench when removing the oil pan plug, as it can easily strip the bolt. Before draining the oil, loosening the oil filler cap slightly can help the old oil flow more smoothly. When tightening the oil pan plug, be mindful of the torque—just snug it up to avoid stripping the threads. Some oil pan plugs come with copper washers to prevent leaks, which need to be replaced periodically, and the oil pan plug itself should also be replaced regularly.
13
1
Share

What happens if caught driving with a full 12-point deduction on the license?

Driving with a full 12-point deduction on the driver's license will result in a fine. Below are the relevant details about point deductions: 1. Accumulating 12 points in one cycle: If a motor vehicle driver accumulates 12 points in a single scoring cycle, they must report to the traffic management department of the public security authority at the location where the driver's license was issued or where the violation occurred within 15 days to receive seven days of education on road traffic safety laws, regulations, and related knowledge. After completing the education, the vehicle management office must administer a subject one exam within 20 days. 2. 12 points during the probationary period: If a driver accumulates 12 points during the probationary period, the driver's license will be invalidated, and the driver must re-study and re-take the driving test. If 12 points are accumulated after the probationary period, the driver must undergo seven days of study and training and retake the subject one exam.
20
3
Share

How to Control the Intake Brake of Weichai Engine?

Here are the control methods for the intake brake of Weichai engine: 1. First gear control: Press the brake switch X1-65, the voltage at the control terminal X1-38 of the intake brake relay changes from 24V to 0V, the first gear intake brake relay engages, and the first gear intake brake solenoid valve starts working. 2. Second gear control: Press the brake switch X1-56, the voltage at the control terminal X1-72 of the intake brake relay changes from 24V to 0V, the second gear intake brake relay engages, and the second gear intake brake solenoid valve starts working. Here are the extended prerequisites for using the intake brake: 1. Condition one: The engine speed is above 1000 rpm. The engine water temperature is above 75°C. The transmission is in gear (neutral signal is 0, not in neutral state). 2. Condition two: The clutch pedal is released (throttle opening is 0). The throttle pedal is released (throttle opening is 0).
5
5
Share

How to Deduct Points for Hill Start and Fixed Point Stop?

The following are the point deduction scenarios for hill start and fixed point stop: 1. Scenario one: During hill fixed point parking, if the wheel presses the right solid line, 100 points will be deducted. If the distance between the right side of the vehicle body and the right solid line is greater than 30 cm but less than 50 cm, 10 points will be deducted. If the distance exceeds 50 cm, 100 points will be deducted. 2. Scenario two: If the front bumper is not placed on the stop line, stopping too early or too late within 30 cm will result in a 10-point deduction. Stalling the engine once deducts 10 points. If the engine is restarted without shifting the gear lever to neutral after stalling, 100 points will be deducted. Rolling back within 30 cm deducts 10 points. Exceeding 30 cm results in a 100-point deduction.
7
2
Share

What is the fastest speed of a motorcycle in mph?

The fastest motorcycle is the Dodge Tomahawk, which can exceed 500 mph. Sports motorcycles, also known as sport bikes, are primarily designed for leisure and recreational use, serving as an entertaining mode of transportation. A motorcycle is a two- or three-wheeled vehicle powered by an engine. The main mechanical components of a motorcycle include the powertrain, braking system, cooling system, steering system, and electrical system. The speed limits for motorcycles as stipulated by national regulations are as follows: Article 45 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: Motor vehicles shall not exceed the speed limits indicated by traffic signs or markings on the road. On roads without speed limit signs or markings, motor vehicles shall not exceed the following maximum speeds: On roads without a centerline, the speed limit is 30 km/h in urban areas and 40 km/h on rural roads. On roads with only one motor vehicle lane in the same direction, the speed limit is 50 km/h in urban areas and 70 km/h on rural roads. On highways, the maximum speed for motorcycles must not exceed 80 mph, and the minimum speed must not be below 60 mph.
10
3
Share

What are the reasons for the engine warning light in Maxus V80?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel quality issues: Failure to use the fuel and engine oil as recommended by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a caution. Causes include spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage. Turbocharging issues: Problems with the intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust. Intake problems: Blockages in the engine intake system can lead to the illumination of the warning light. A dirty or uncleaned air filter can cause intake issues. Exhaust problems: Exhaust system faults, including issues with the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings, can trigger the warning light. The catalytic converter is the most common culprit, often affected by the use of leaded gasoline or lubricant additives containing lead or silicon, physical damage to the converter, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine ECU, the engine may not operate normally, and the warning light will illuminate. If the engine warning light comes on, follow these steps: First, check if the engine is running normally. Look for symptoms such as shaking or black smoke. If present, avoid restarting the engine. Particularly, do not restart if the light is red. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check upon powering up. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service station as soon as possible. Technicians can use a portable diagnostic tool to read fault codes, identify the issue, and perform targeted repairs.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.