How to Open the Hood of a Mercedes-Benz GLC?

1 Answers
MarcusRose
07/29/25 7:44pm
The method to open the hood of a Mercedes-Benz GLC is to pull the hood release lever located at the lower left side of the driver's compartment. The Mercedes-Benz GLC is a crossover model introduced by Mercedes-Benz, with exterior dimensions of 4764mm in length, 1898mm in width, and 1642mm in height, and a wheelbase of 2973mm. It is equipped with 1.8T, 2.0T, and 3.0L V6 engines, with maximum output powers of 135kW, 155kW, and 180kW, respectively. The Mercedes-Benz GLC features a multi-link independent front suspension, multi-link independent rear suspension, electric power steering, tire pressure monitoring, brake assist, and an electronic stability control system.
Was this review help?
14
1
Share
More Forum Discussions

What models are compatible with 130/60-10?

130/60-10 tires are compatible with 120/70-10 tires. Below is relevant information about tires: Functions of tires: mainly include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load-bearing capacity, handling performance, average wear, and mileage. Tire cross-sectional structure: Generally, it can be divided into four parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the rim to provide sealing. Internal composition of tires: The interior of the tire is composed of multiple layers of different materials, including tread pattern, overlay, steel belt layer, stress-absorbing rubber strip, carcass ply layer, and inner liner.
14
5
Share

How to Change the Oil in an Air Compressor?

The steps for changing the oil in an air compressor are: 1. Run the air compressor to normal operating temperature and keep it running for one hour before shutting it down. Drain the oil from the oil tank, cooler, and all filters; 2. Add the new replacement oil to the air compressor to the minimum operating oil level required; 3. Shut down the air compressor and drain the oil from the cooler, oil tank, and all filters again; 4. Add the newly purchased air compressor oil and conduct a trial run. The function of the compressor is: to regulate the start-stop state of the air compressor, allowing it to shut down and rest by adjusting the pressure in the air storage tank, which has a maintenance effect on the engine. The working principle of the compressor: it draws the refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the heat sink, and the refrigerant changes from a gaseous state to a liquid state, with an increase in pressure.
17
5
Share

What does LED light mean? What is its purpose?

LED light is an electroluminescent semiconductor material chip. The uses of LED lights are: 1. Turn on the turn signal to alert following vehicles and reduce rear-end collisions; 2. Improve visibility of road conditions and enhance driving safety; 3. Inform vehicles behind that braking is in progress, prompting them to slow down; 4. Activate hazard lights during temporary parking, emergencies, or poor visibility conditions to alert oncoming traffic. The maintenance methods for automotive LED lights are: 1. Regularly check the lamp cover to avoid moisture accumulation; 2. Replace bulbs periodically; 3. Adjust the height of the lights properly; 4. Use high-quality bulbs for replacements; 5. Prevent foreign objects from impacting the lights.
2
1
Share

What are the effects of uneven brake discs on a car?

Uneven brake discs can affect the safe driving of a car. The method to inspect car brake discs is as follows: 1. Remove the tire and brake caliper; 2. Take off the brake disc. The method to replace brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take off the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement. The reasons for brake noise when the car is cold are: 1. When the brake discs rub, they produce some metal powder, which can cause unusual noises when braking. Such noises from the brake pads are normal noise phenomena; 2. Brake noise indicates that the brake pads have reached their wear limit, causing friction between the brake warning shim and the brake disc, resulting in a metal-on-metal sound. Solutions for brake noise: 1. Press the brakes hard several times or perform emergency braking in an open area to improve the situation; 2. Replace the car's brake pads promptly to prevent potential hazards.
4
0
Share

What are the signs for dedicated parking lots?

Dedicated parking lot signs include: 1. A blue background with a white circle and a 'P' in the middle indicates an open-air parking lot; 2. A 'P' with a small arrow above it indicates an indoor parking lot; 3. A parking lot with a specific vehicle symbol (such as non-motor vehicles, trucks, tricycles, etc.) is a dedicated parking lot. Underground parking lots usually have height restrictions and signs indicating whether they are free or chargeable, along with the pricing. Tips for driving on the road: 1. Pay attention to vehicles behind when turning or merging, judge the distance, and turn on the turn signal in advance before changing lanes or turning; 2. Observe the traffic conditions through the rearview mirror in time when changing lanes, reversing, or overtaking; 3. Observe various traffic signs in advance to avoid penalties for violations; 4. Make a wide left turn and ensure a right turn does not affect the straight lane; 5. Avoid excessive or frequent steering wheel adjustments, and correct the direction promptly if the vehicle tends to deviate; 6. Maintain a safe driving distance; 7. Large trucks have significant blind spots, so keep a distance or pay close attention to their driving conditions when encountering them on the road.
17
3
Share

Does the Tiguan L have an intelligent car connectivity system?

The Tiguan L does not have an intelligent car connectivity system. Taking the 2021 Tiguan L as an example, it is a mid-size SUV with the following dimensions: length 4712mm, width 1839mm, height 1673mm, wheelbase 2791mm, fuel tank capacity 60L, and curb weight 1650kg. The 2021 Tiguan L features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, maximum power of 137kW, and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.