
There is a hood lock on the left side of the driver's compartment near the door pillar. Pull it, then go to the front of the car and lift the hood. At this point, there will be a gap in the hood. Feel around with your hand to find a latch that can be flipped. Flip it, and the hood will open. Below is an introduction to the functions of the hood: 1. Airflow guidance. For objects moving at high speeds in the air, the air resistance and turbulence generated around the object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance force it generates, reducing the impact of airflow on the car. Through airflow guidance, air resistance can be decomposed into beneficial forces, increasing the downward force on the front tires and improving the car's driving stability. 2. Protection of the engine and surrounding components. Under the hood are critical components of the car, including the engine, electrical circuits, oil lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's normal operation. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the car as a whole.

When I first bought my Levin, it took me a while to figure out how to open the hood. You need to sit in the driver's seat, look down below the steering wheel on the left side for a small lever, and pull it toward you. You'll hear a click, indicating the main latch is released. Don't rush to get out of the car yet—the hood will pop up slightly with a small gap. Then, walk to the front of the car, feel under the edge of the hood around the center for a secondary safety latch, gently push or lift it while using your other hand to raise the hood. It should open smoothly. Don't forget to use the support rod to secure the hood in place, or it could fall and cause injury. Make sure the engine has been off for a few minutes and cooled down before doing this. Also, keeping the latch area clean to prevent jamming is crucial—I check and clean it weekly to ensure smooth operation.

To open the hood, first locate the approximately 10-centimeter-long pull handle under the steering wheel from the driver's seat and firmly pull it backward. This releases the primary mechanical latch. Then move to the front of the vehicle, bend down to find the secondary latch hidden beneath the front edge of the hood – typically a small metal lever that needs to be flipped rightward or upward. After completing these two steps, simply lift the hood and secure it in place using the attached metal prop rod. The entire process requires smooth, continuous motion to avoid interruptions and prevent pinching fingers. When the engine is overheated, avoid touching components and allow five minutes for cooling. Regularly applying lubricant to the latch mechanisms extends their lifespan – I've frequently experienced sticking issues from neglecting cleaning, so paying attention to these details is crucial.

Opening the hood of the Leiling is quite simple: Sit in the car and locate the lever at the lower left of the steering wheel, then pull it firmly; after hearing a sound, there's a safety latch under the front hood outside, just flip it to lift the hood, and finally insert the support rod. Make sure the car is parked safely and the engine is turned off—safety first.

The most crucial step before opening the hood is safety preparation: park the car on level ground, turn off the engine, and let it cool for ten minutes to prevent burns. Then, enter the driver's seat and pull the release lever under the steering wheel—you'll feel it snap back. Exit the vehicle and locate the hidden safety latch at the edge of the hood. Carefully feel for a small movable component, being cautious not to pinch your nails during operation. Once successfully opened, secure the hood firmly with the support rod. When closing, press down firmly on both ends to ensure the locks engage properly. Such operations are best performed in good lighting—don’t rush to avoid accidents (I’ve seen novices injure their hands in haste). Regularly check for loose latches as a preventive measure.

Many Levin owners pull the wrong lever or forget the safety latch, causing the hood to only lift slightly. The correct method: After pulling the lever under the driver's seat, quickly go to the front of the car, locate the small hand-release latch under the hood while lifting it—don't hesitate. The exact spot is near the emblem, easily reachable; operate gently without using excessive force. Initially, I didn't find the right spot and wasted effort, but remembering the location made it effortless later. Finally, ensure the hood is fully secured and test the closure by driving a short distance to prevent accidents.


