How to open the hood of a Kia K3?
3 Answers
Method to open the hood of a Kia K3: Pull the hood release cable, push the latch lever to the left, and then lift the hood. More information about the Kia K3 is as follows: 1. The Dongfeng Yueda Kia K3 shares the same platform design with the Hyundai Elantra, providing more passenger space. 2. The Dongfeng Yueda Kia K3 is equipped with the same powertrain as the Hyundai Elantra: 1.6L and 1.8L engines. 3. The dimensions of the Yueda Kia K3 are: 4600mm in length, 1780mm in width, and 1445mm in height. 4. The 1.6L engine model has a maximum power output of 93.8kW and a maximum torque of 155.5Nm; the 1.8L engine has a maximum power output of 107kW and a maximum torque of 175Nm.
Opening the hood on a Kia K3 is straightforward in two steps: First, sit in the driver's seat and look down near your left foot for a lever marked with the hood symbol. Pull it firmly until you hear a click. Don't rush to lift your head yet—walk to the front center of the car, reach into the hood gap, and feel for a movable metal latch switch. Push it to the left while gently lifting the hood to open it. When operating my 2019 K3, I noticed beginners often skip the second step—after pulling the lever, the hood only pops up about 2 cm and stops, requiring manual release to fully open. Remember to secure the hood with the prop rod to avoid hand injuries, and ensure it's properly closed by listening for the locking click after inspection.
Opening the hood of a K3 can be tricky if you're unaware of its dual-safety design. After pulling the hood release lever (marked with a car front symbol) under the steering wheel, the hood will only pop open slightly. You then need to reach into the gap at the front center, feel for a spring-loaded latch, press it all the way down, and then lift the hood. I've seen a neighbor force it open and break the latch, costing hundreds to repair. Note: older K3 models have the release on the left side, while newer ones have it in the center—be extra careful with slippery hands after washing the car. After closing, always return the support rod to its slot; otherwise, it may bounce up dangerously while driving.
