How to Open the Hood of a Corolla Car?

2 Answers
DelilahLynn
07/28/25 3:21pm
First, locate the switch below the left side of the driver's seat and pull it to open a small gap in the hood. Then, reach into the gap and flip the lever of the safety latch to successfully open the engine hood. Below is some relevant information about the Corolla: 1. The Corolla is a compact sedan under Toyota. The new Corolla is equipped with two types of engines: a 1.8-liter naturally aspirated engine and a 1.2-liter turbocharged engine. The model with the 1.8-liter naturally aspirated engine is a hybrid version, which offers sufficient power and excellent fuel economy. 2. The 1.8-liter naturally aspirated engine in the hybrid version is an Atkinson cycle engine. Although this engine does not provide strong power, it has outstanding fuel efficiency. The 1.8-liter naturally aspirated engine in the hybrid version delivers a maximum power of 98 horsepower and a maximum torque of 142 Nm. The engine reaches its maximum power at 5,200 rpm and its maximum torque at 3,600 rpm. This engine is equipped with VVT-i technology and multi-point fuel injection, and it features an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 53 kW and a maximum torque of 163 Nm.
Was this review help?
5
5
Share
DeRyan
08/11/25 10:51pm
As a veteran driver who has owned three generations of Corollas, here's a practical tip: The Corolla hood release is located below the driver's seat on the left side, above the floor mat - look for a handle with an engine symbol. Pull it and you'll hear a 'click' sound indicating it's unlocked. Then feel for the silver latch at the very center front of the car - slide your fingers through the hood gap to find a metal tab that flips up and down. Remember to wear gloves when doing this right after turning off the engine in summer - last time I touched that latch barehanded and got a blister from the heat. Oh, and don't let go immediately after opening - use your right hand to support the hood while inserting the support rod (bright yellow on post-2018 models, very noticeable) into the designated hole with your left hand.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What to Do If a Vehicle Fails Emission Inspection?

Here are the methods to address a vehicle failing emission inspection: 1. Poor Fuel Quality: If low-quality fuel is frequently used, it can lead to excessive carbon deposits after combustion and may impair the performance of the exhaust purification system, reducing its lifespan and increasing pollutant emissions, resulting in failed tailpipe emissions. Therefore, before the annual inspection, it is advisable to fill up with high-quality gasoline and drive on the highway before testing. 2. Clogged or Poisoned Catalytic Converter: Frequent low-speed driving or the use of inferior fuel can cause the catalytic converter to clog or become poisoned and malfunction. In such cases, you can purchase professional cleaning agents to remove and clean the catalytic converter or drive at high speeds for a distance. High-speed driving is effective in cleaning the engine's fuel system and cylinders. Additionally, at high engine speeds, fuel burns more completely, helping to flush out dirt and impurities from the fuel system and remove carbon deposits from the valves, clearing blocked passages and achieving a cleaning effect. Additional Information: For non-commercial vehicles that fail emission inspections, the public security department will temporarily confiscate the vehicle's license until the issue is resolved and standards are met before allowing the vehicle back on the road. For commercial vehicles, the municipal transportation bureau will suspend their operational qualifications until the issue is resolved and standards are met before allowing them back into service. If a vehicle fails the emission inspection three times, it may face mandatory scrapping, which is an important point to note.
7
2
Share

Will vehicles whose front has crossed the stop line when the yellow light is on be penalized?

When the yellow light is on, vehicles whose front has crossed the stop line may continue to pass, while vehicles whose front has not crossed the stop line will be considered as running a yellow light if they continue to move forward, which is a traffic violation. The following is a relevant introduction about traffic violations: 1. Definition: Traffic violations refer to the behavior of vehicle drivers, pedestrians, passengers, and units and individuals related to road traffic activities that violate the "Road Traffic Safety Law of the People's Republic of China" and related laws, regulations, and traffic management rules. 2. Hazards: Leading to traffic disorder, causing accidents, affecting city appearance, and creating public hazards.
14
3
Share

How to reset the wrench light on the 10th generation Accord?

Method to reset the wrench light on the 10th generation Accord: 1. Set the power mode to ON and ensure the vehicle is completely stopped. 2. Repeatedly press the "TRIP" button until the engine oil life is displayed on the instrument panel. 3. Hold the "TRIP" button for more than 10 seconds. The display will flash, indicating it is in reset mode. Additional information about the 10th generation Accord: 1. It accelerates quickly on highways, providing a noticeable push-back sensation at high speeds. At low speeds, gear shifts are smooth. The 10th generation Accord features Honda's second-generation engine, with VTEC technology on the exhaust side improving fuel efficiency, making it more economical. 2. It offers safety, robust power performance, and high resale value. The 10th generation Accord gasoline version is equipped with a 1.5T engine, with maximum power outputs of 130kW/143kW and peak torques of 230N·m/260N·m, paired with a CVT transmission. 3. It uses a high-strength transmission belt with a wider gear ratio range, providing greater torque capacity while enhancing transmission efficiency. This improves fuel economy and achieves more responsive acceleration.
14
3
Share

What is a Cigarette Lighter?

A cigarette lighter is a tool used for lighting cigarettes. It is a component found in all vehicles, designed to provide a convenient ignition source for drivers who smoke. The power supply is typically 12 volts DC (may vary depending on the vehicle model), with the central spring-loaded contact as the positive terminal and the side clips as the negative terminals. The cigarette lighter is directly connected to the vehicle's battery, sharing the same current and power specifications. Beyond its primary function of lighting cigarettes, the cigarette lighter can also be equipped with a car power inverter, which converts the vehicle's 12V, 24V, or 48V DC power into 220V 50Hz AC power, suitable for powering common electrical appliances. The cigarette lighter socket functions similarly to a household multi-outlet power strip, connecting to the vehicle's power supply via a plug and providing multiple cigarette lighter ports for electronic devices.
10
0
Share

Why does the car engine speed up but the speed doesn't increase?

This situation needs to be differentiated based on whether the engine is matched with a manual transmission or an automatic transmission. Here is the relevant analysis: 1. Manual transmission: The main reasons are problems with the clutch and transmission. The clutch acts as an intermediary for power transmission between the engine and the transmission. If the clutch friction plate slips, power loss will occur. 2. Automatic transmission: The main reason is that the torque converter is not locked. Generally, when the engine speed, vehicle speed, and throttle depth reach a certain level, the torque converter will lock. Before it locks, it is easy to encounter the situation where stepping on the throttle only makes noise but the car doesn't move.
3
2
Share

How many kilometers can a 72V 60Ah lithium battery run?

72V 60Ah lithium battery can run approximately 100-150 kilometers. Lithium battery electric vehicle repair methods: 1. For an electric vehicle lithium battery pack with specifications of 48V 20AH, a 60V 20AH battery charger can be used for charging and repair; 2. For a 48V 12AH lithium battery pack, a 48V 20AH battery charger can be used for repair; 3. Use dry cleaning shop steam water to repair lithium batteries. Many electric vehicle users realize that their electric vehicles cannot run far and need to add distilled water for maintenance and battery repair. However, the purified water and various supplements and repair fluids sold on the market have a temporary effect on the battery, and then accelerate the performance degradation of the battery, leading to premature failure.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.