···
Log in / Register

How to Open the Hood of a Buick Excelle?

4 Answers
StAdriana
07/24/25 6:48am
To open the hood of a Buick Excelle: Locate the release handle under the dashboard near the driver's left calf, pulling towards the front of the car. After pulling, the hood will pop up about 1cm. Then, lift the hood with one hand while using the other hand to reach under the front grille to find and pull the hood release lever. Below is some related information about the Buick Excelle: 1. The Buick Excelle's 1.3L naturally aspirated engine produces 107 horsepower and a maximum torque of 133 Nm. This engine can deliver its maximum power at 6,200 rpm and its peak torque at 4,000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. This engine is paired with either a 5-speed manual transmission or a CVT. The CVT offers better reliability and durability. Inside the CVT, there are two pulleys and a steel belt. The steel belt can move along the pulleys, allowing the transmission to vary its gear ratio and torque output.
Was this review help?
18
2
Share
LeAiden
08/11/25 12:30am
I'm a young guy who just bought a Buick Excelle not long ago, and I felt quite nervous when trying to open the hood for the first time, afraid of doing something wrong. Actually, the steps are pretty simple: Sit in the driver's seat, bend down to find the hood release lever near your left leg, give it a gentle pull, and you'll hear a slight pop as the hood releases; then get out of the car and walk to the front, where you'll see a small latch under the hood, usually yellow or red in color. Simply flip or press it while lifting the hood with your other hand. Once it's fully open, remember to secure it with the support rod to prevent it from accidentally falling. The whole process takes less than a minute and is easy even for beginners. Don't be as flustered as I was at first—just stay calm. Learning this is useful for regular checks of engine oil and coolant, helping to prevent small issues from turning into big problems.
Was this review help?
19
3
Share
Expand All
ValerieRose
09/24/25 8:04am
I've been driving my Buick Excelle for several years and am very familiar with the hood release operation. First, get into the car, settle in, then glance toward the left foot area to spot the hood release handle - just pull it to pop open a gap. Then walk to the front of the car, locate the latch lever under the hood, and gently push or press it with your finger to instantly release the hood. Don't forget the hood is quite heavy - after lifting it, secure it with the support rod to prevent injury or damage from accidental closing. Personal tip: If you frequently open the hood, keep the latch clean and lubricated to prevent rust from affecting operation. This simple routine makes daily maintenance like replacing air filters or checking belt lifespan much easier, saving significant repair costs.
Was this review help?
8
5
Share
Expand All
MacHazel
11/08/25 3:28am
As a regular female driver of a Buick Excelle, opening the hood is quite simple: After starting the car, sit properly and pull the handle next to the driver's seat. Then, get out of the car, locate a small latch (usually bright-colored) in the hood gap, gently move it, and push upwards to open. Don't worry about the weight—the support rod will hold it steady. The whole process is smooth and effortless, making it easy for women to handle. Always ensure the car is parked on level ground before checking, safety first.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to Remove Oil Stains from Car Paint

Methods to remove oil stains from car paint include: 1. Prepare car-specific car wash solution, sponge, and car wash cloth; 2. Wet the areas with oil stains on the car body with water; 3. Pour the car wash solution onto the sponge, create foam, and apply it to the oil-stained areas; 4. Wipe with the sponge—do not scrape with nails or use rough cloth to scrub back and forth, as this can easily scratch the paint; 5. Rinse off the foam from the car with water; 6. Wipe clean with a car-specific fiber towel, and the oil stains will disappear. Note: Thoroughly clean any debris from the sponge and towel to prevent small stones from scratching the car paint.
16
0
Share

What is the reason for the dim headlights of Qin Pro?

The reason for the dim headlights of Qin Pro is that the outer shell of the headlights, after prolonged exposure to wind and sun, can be gradually corroded and scratched by dust and impurities in the air, resulting in a difficult-to-clean yellow stain that causes the headlights to appear dull and hazy. Methods to clean the headlights: 1. Soapy water is a weakly alkaline substance, non-corrosive, gentle in nature, and has strong cleaning power. Simply apply the prepared soap solution to the surface of the headlights, wait for about ten minutes, and then repeatedly wipe with a sponge to remove stains, also providing a certain polishing effect. 2. Use a soft cloth to wipe the surface of the headlights, which can prevent the formation of stains and maintain the brightness of the headlights. During the wiping process, avoid using rough cloths or applying excessive force, as the headlight shell can be scratched. Once scratches appear, stains can get trapped inside, making them difficult to clean.
3
2
Share

What is the ground clearance of the Tiguan?

The ground clearance of the Tiguan is: 1. 160mm for the two-wheel drive version; 2. 180mm for the four-wheel drive version. The Volkswagen Tiguan is equipped with a steel engine underguard, which feels quite sturdy when tapped by hand and can withstand minor underbody impacts. The front section of the chassis is relatively flat, and the underguard helps prevent the engine from scraping against the ground on unpaved roads. The Tiguan is a compact 5-door, 5-seat SUV, featuring a 6-speed automatic transmission with manual mode and a turbocharged engine. It has a MacPherson strut front suspension and a multi-link independent rear suspension. The vehicle dimensions are 4506mm in length, 1809mm in width, and 1685mm in height.
13
4
Share

Reasons for Excessive Engine Oil Pressure?

Reasons for excessive engine oil pressure include: 1. Low oil viscosity; 2. Clogged oil pickup screen or oil filter element; 3. Weakened or broken pressure relief valve or return valve spring, leading to poor valve sealing; 4. Excessive clearance in main bearings or connecting rod bearings; 5. Poor oil pump performance. Methods for checking engine oil pressure: 1. Inspect the oil pressure gauge and sensor, replacing them if malfunctioning; 2. Verify oil viscosity meets specifications, replacing with appropriate viscosity oil if too high; 3. Adjust the pressure relief valve to ensure oil pressure meets requirements; 4. Regularly clean oil lines, passages, and maintain the filter.
20
2
Share

Why Doesn't the Car Alternator Generate Electricity?

Car alternator not generating electricity may be caused by: 1. Broken or slipping alternator belt; 2. Open circuit in alternator output wiring; 3. Rotor part jammed; 4. Damaged winding. The function of car alternator is: to supply power to all electrical equipment and charge the battery when the engine is running normally. Solutions for car alternator not generating electricity: 1. Secure adjustment device or replace belt; 2. Check wiring condition, repair if open circuit exists; 3. Tighten rotor part; 4. Measure coil resistance with multimeter, rewind coil or replace motor if no resistance value.
10
5
Share

How to Reset the Maintenance Reminder on a Lavida?

The method to reset the maintenance reminder on a Lavida is: 1. Remove the key to turn off the dashboard lights; 2. Press and hold the maintenance reset button; 3. Turn on the key and wait until the maintenance cycle indicator displays normally; 4. Turn off the key and then turn it on again to test if the reset is successful. If not, repeat the above steps. Taking the 2011 Lavida 1.4TSI Manual Elegance Edition as an example: the vehicle has a length of 4605mm, width of 1765mm, height of 1460mm, a wheelbase of 2610mm, braking system with front ventilated discs and rear discs, equipped with a 1.4-liter engine and a 5-speed manual transmission, front-wheel drive, and a maximum torque of 220 Nm.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.