···
Log in / Register

How to Open the Hood of a 2021 Levin?

3 Answers
FranciscoLynn
09/07/25 5:41am
There is a release lever under the dashboard near the driver's left calf, facing the front of the car. Pulling this lever will pop the hood open by about 1cm. After locating the lever, apply force to fully open the engine hood.
Was this review help?
7
1
Share
LeLeilani
09/19/25 4:53am
When I first operated the hood of my 2021 Leiling, the process was quite straightforward. Sitting in the driver's seat, I bent down to locate a small handle near the left foot pedal—that black plastic lever—and pulled it upwards firmly. With a distinct 'click' sound, the hood would pop open slightly. Then, walking to the front of the car, I crouched down and slid my fingers into the gap of the hood, feeling for a small metal latch or button right at the center. Gently pushing it upwards while lifting the hood with my other hand did the trick. Finally, don't forget to secure the hood by propping it up with the support rod on the right side, ensuring it stays steady. Opening the hood is crucial for routine maintenance tasks like checking engine oil levels or topping up coolant. I prefer doing this when the engine is cold, waiting a few minutes after turning off the car to avoid burning my hands and to minimize dust accumulation. I also make it a habit to open and wipe down the engine compartment before each car wash—this keeps the machinery running smoother and saves a lot of hassle!
Was this review help?
12
5
Share
Expand All
DeJude
11/02/25 5:16am
The first time I opened the hood of my 2021 Levin, it felt a bit like trial and error. I crawled under the driver's seat, found the release lever beneath the dashboard on the left side of the steering wheel, and gave it a pull—the front of the hood popped open. Then, I walked around to the front of the car, crouched down to locate the hood latch in the gap, spotted a small metal lever in the middle, pushed it while lifting the hood, and it opened completely. The whole process requires using both hands and making sure the support rod is securely in place before starting any work to avoid accidents. After trying it a few times in my own garage, I found the design quite user-friendly, even for beginners. Why is it important? Tasks like cleaning the engine bay and checking fluid levels, such as the coolant, all require opening the hood. Doing this regularly helps spot potential issues early. My tip: Check it once a week after driving, and just follow the steps calmly!
Was this review help?
10
4
Share
Expand All
More Forum Discussions

How to Turn on the Hazard Lights in Honda CR-V?

Honda CR-V's hazard lights are located between the two air vents above the display screen. The hazard light switch is a red triangle; press it once to turn on the hazard lights. Hazard lights, also known as emergency flashers or warning lights, are a signal light on the vehicle used to alert other vehicles and pedestrians that the car is in a special situation. Below are the relevant details for operating the lights in Honda CR-V: 1. High Beam: Push the control lever forward until you hear a click. 2. Low Beam: When the high beam is on, pull the control lever back to switch to low beam. 3. Flash High Beam: Pull the control lever back and then release it. 4. Auto Light-Off Function: The headlights, exterior lights, and dashboard lights will automatically turn off 15 seconds after removing the key or setting the power mode to LOCK (vehicle off).
17
5
Share

How long is the validity period of a motorcycle temporary license plate?

Motorcycle temporary license plates are valid for 15 days. Below is an extended introduction: 1. Consequences of expiration: New vehicles must not use temporary license plates for more than 15 days, and owners should promptly apply for official license plates from the vehicle management authority. After expiration, penalties may include temporary vehicle seizure, a fine of 200 yuan, and 3 demerit points. 2. Extension information: Temporary license plates for new vehicles can be extended, with a maximum of 3 extensions totaling 21 days. 3. Meaning of temporary license plates: Paper motor vehicle license plates that permit temporary road use, also known as temporary driving license plates. These are temporary vehicle movement certificates issued by the public security vehicle management department for newly purchased vehicles before formal registration.
13
3
Share

What to Do If You Scratch Someone Else's Car While Driving a Shared Car?

After a vehicle scratch accident occurs, you should immediately choose a suitable location to stop the car. After stopping, firmly apply the handbrake as required, cut off the power, and turn off the engine. Confirm the safety conditions of both parties involved. If personal safety is compromised in the scratch accident, you should call the police immediately. Check the condition of the vehicles. It is advisable to use digital tools to record the scene. For example, use the photo function of your mobile phone or a portable digital camera. Record the information of both vehicles and their owners. It is necessary to note down the license plate numbers, driver's licenses, vehicle registration certificates, insurance certificates, and other relevant information of both parties. Determine liability and reach an agreement. Common scenarios include: failing to maintain a safe distance, rear-ending the vehicle in front, where the rear vehicle is responsible; or a motor vehicle changing lanes, affecting the moving vehicle.
5
3
Share

Where is the ETC device switch located?

ETC device switch is located on the top of the ETC electronic tag. ETC is an electronic toll collection system, also known as an automatic road payment system. It is a specialized road toll method used for toll roads, commonly found on highways, bridges or tunnels with toll policies, and certain sections of urban centers to alleviate traffic congestion. The installation method for the ETC device is as follows: 1. Purchase the ETC device, check if all components are complete, and review the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the adhesive backing of the device, fold the solar panel against the vehicle's front windshield, and press firmly to ensure secure adhesion; 4. Install the device on the upper center of the vehicle's front windshield without obstructing normal driving visibility. It should be adhered in one go and not removed for reapplication; 5. Insert the ETC card to activate the device. Upon hearing a beep and seeing the device indicator light up, the device is activated, and the installation is complete.
9
3
Share

Has the Mazda MX-5 Big Eyes Edition been discontinued?

Mazda MX-5 Big Eyes Edition has been discontinued. Below is the relevant introduction of Mazda MX-5: 1. Model Positioning: The Mazda MX-5 is a lightweight convertible sports car produced by Mazda Motor Corporation. The body dimensions of the Mazda MX-5 are 3915*1735*1245mm. 2. Powertrain: The MX-5 is equipped with a 2.0L naturally aspirated engine, with a maximum power output of 158 horsepower and a maximum torque of 200 Nm. 3. Tires: The MX-5 does not feature a staggered tire setup with narrower front and wider rear tires. All four wheels are the same size at 205/50R16, and the vehicle comes standard with Yokohama Advan-A11A tires.
3
5
Share

Where is the oil pump located on the Baojun 560?

The oil pump is divided into a fuel pump and an engine oil pump. The fuel pump of the Baojun 560 is installed inside the fuel tank. Its function is to draw gasoline from the fuel tank and deliver it through the pipeline and fuel filter to the float chamber of the carburetor. The engine oil pump of the Baojun 560 is installed inside the engine. The function of the engine oil pump is to raise the oil to a certain pressure and then forcibly deliver it to the moving surfaces of various engine components. Below is how the automotive fuel pump works: 1. The fuel pump is installed inside the vehicle's fuel tank and is electrically driven. It consists of three parts: the pump body, the permanent magnet motor, and the housing. 2. When the permanent magnet motor is powered, it drives the pump body to rotate, sucking fuel from the inlet, passing it through the internal structure of the electric fuel pump, and then pressing it out from the outlet to supply the fuel system. 3. The motor part of the electric fuel pump includes a permanent magnet fixed on the housing, an armature that generates electromagnetic torque, and a brush device installed on the housing.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.