How to Open the Hood?

1 Answers
DeBriella
07/24/25 8:49am
Opening the hood involves the following steps: 1. Pull the hood release lever located at the lower left corner of the driver's compartment; 2. Lift the hood and then release the latch. The functions of the hood include: 1. Airflow guidance; 2. Protection for the engine and surrounding pipeline fittings; 3. Assisting driving vision by effectively adjusting the direction of reflected light; 4. Preventing accidents; 5. Isolating heat generated during engine operation. If the hood is stuck and cannot be opened, try these methods: 1. Lubricate the hood latch spring; 2. Use a tool to hook open the hood, or insert a wire from under the vehicle's engine into the hood lock hole to pull it open.
Was this review help?
12
1
Share
More Forum Discussions

When Should Spark Plugs Be Replaced in a Car?

When to replace spark plugs in a car: 1. The lifespan of resistor spark plugs is 20,000 kilometers; 2. The lifespan of platinum spark plugs is 40,000 kilometers; 3. The lifespan of iridium spark plugs can reach 60,000 to 80,000 kilometers. Spark plugs are a crucial component of the ignition system in gasoline engines. They introduce high voltage into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. A spark plug consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. They are categorized into: standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, surface-gap spark plugs, and standard and projected-type spark plugs.
14
2
Share

What are the precautions for wading vehicles?

Precautions for wading vehicles: When driving through water, be sure to engage a low gear and then maintain a steady throttle pedal to move forward at a constant speed. If you proceed at too high a speed, it will create splashes, which can easily cause the engine to stall. If the engine stalls during wading, attempting to restart it immediately can lead to severe engine damage. The stalling occurs because water has entered the engine's air intake, preventing the engine from drawing in air. Before driving through water, always check the water depth. If the water is too deep, avoid attempting to drive through it. After wading, some electronic systems in the vehicle may malfunction, which is normal. It is advisable for vehicle owners to avoid driving through water whenever possible, as it can cause damage to the car.
17
4
Share

What are the aftereffects of a vehicle driving through water?

Aftereffects of a vehicle driving through water: 1. Electronic system failure: After driving through water, the related electronic modules of the engine are highly prone to short circuits. Once the vehicle's central computer or wiring harnesses are affected, minor issues may cause a function to fail, while severe cases can lead to vehicle damage or even fires caused by short circuits; 2. Engine failure: If the owner attempts to restart the vehicle after the engine stalls due to water intake, the immense counterforce can cause the connecting rods to bend and rub against the cylinder walls, potentially puncturing the engine block instantly; 3. Waterlogged interior: When water levels rise above the doors, the interior is likely to get flooded. If the vehicle is not dried promptly, mold can quickly ruin the fabric and leather upholstery.
12
4
Share

What documents are needed for out-of-town vehicle annual inspection?

More details about the documents required for out-of-town vehicle annual inspection are as follows: 1. Different situations for out-of-town annual inspection of vehicles in different periods. Before September 1, 2018, the required documents for vehicles included the original ID card, vehicle license, copy of compulsory traffic insurance, vehicle and vessel tax certificate, and an out-of-town vehicle inspection authorization letter; after September 1, 2018, vehicles no longer need to provide an out-of-town vehicle inspection authorization letter. 2. Application for an out-of-town vehicle inspection authorization letter. One method is to personally bring the required documents back to apply for the authorization letter and then take it back for the annual inspection; another method is to authorize a local friend or relative to handle the authorization letter on your behalf. For this, the vehicle owner needs to provide the representative with a power of attorney. The representative must bring their own ID card, the power of attorney, the vehicle owner's original ID card, original vehicle license, copy of compulsory traffic insurance, and vehicle and vessel tax certificate before they can proceed with the application.
19
0
Share

What is the fuel consumption of the Great Wall Pao diesel pickup truck?

The comprehensive fuel consumption of the Great Wall Pao ranges from 10-12L/100km. The vehicle's fuel consumption is influenced by various factors such as driving conditions, road surfaces, driver habits, and auxiliary power equipment, and should be analyzed based on specific circumstances. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance can lead to increased fan speed and lower temperatures to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a major reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
8
0
Share

What Causes the Car Door to Automatically Pop Open After Locking?

If the car door automatically pops open after locking, it may be due to insufficient lubrication of the door lock mechanism. Below is an introduction to the reasons for automatic door opening: 1. Solutions: When the door is not properly closed, it may automatically open while driving on bumpy roads. If there is a malfunction in the car's central locking system or a signal failure in the computer board, it can also cause the door to lock and then automatically open again. In such cases, the central lock needs to be replaced, and the computer board should be checked. 2. Situations where the door won't lock: If one of the four doors or the trunk is not properly closed when locking the car, most models will not fully lock. Even if the lock button is pressed, the doors will not lock if they are already closed and locked but not fully secured.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.