How to open the G-Class door from the inside?

What Causes Steering Wheel Stiffness?

The causes of steering wheel stiffness include incorrect toe-in value, lack of lubricant in steering wheel components, and malfunction of the steering angle sensor. Incorrect toe-in value: When driving normally and turning the steering wheel, abnormal noises can be heard. This indicates an incorrect toe-in value of the tires, and it is necessary to visit a 4S shop to adjust the toe-in value. If needed, a four-wheel alignment can also be performed. Lack of lubricant in steering wheel components: When turning the steering wheel while parked, abnormal noises can be heard, and the steering wheel may feel stiff. This is likely due to a lack of lubricant in the steering wheel components. In this case, applying lubricant to the components can resolve the issue. Malfunction of the steering angle sensor: The electronic power steering system relies on the steering angle size to provide assistance. A malfunctioning steering angle sensor can also cause steering wheel stiffness. Check if the issue is due to poor lubrication of the steering angle sensor. If so, replacement may be necessary.

16

5

Share

How Long Does a Leather Steering Wheel Last?

A leather steering wheel typically lasts between 3 to 5 years. Its lifespan is influenced by the usage environment, habits, frequency, and even the parking conditions. Functions of the Steering Wheel: Direction Control: The steering wheel is designed to accurately control the direction, ensuring the vehicle follows the intended route. Multifunctional Steering Wheel: Equipped with multiple buttons, it allows the driver to control in-car music, answer calls, and other functions directly from the wheel. This enhances driving convenience and safety by reducing distractions. Tire Pressure Perception: If the steering wheel starts pulling to one side while driving, it may indicate low tire pressure. The direction of the pull corresponds to the affected tire. It's crucial to stop and inspect to avoid potential blowouts and hazards. Steering Wheel Maintenance Tips: Leave Some Space When Turning: Avoid turning the steering wheel to its extreme limit; leaving a little space helps maintain the hydraulic steering system in good working condition and protects the wheel. Avoid Forcing the Steering Wheel: Do not forcibly turn the wheel as it can cause damage to the steering system and may lead to issues with the vehicle's parking and control systems. Regular Inspections: Periodically check the hydraulic system for leaks and the tension of the power steering pump belt. Address any faults promptly with repairs or cleaning.

14

3

Share

What Causes Heavy Steering Wheel?

The reasons for a heavy steering wheel include insufficient power steering fluid, low tire pressure, and excessively tight bearing fit. Insufficient power steering fluid: Normally, the steering effort feels relatively constant. If it suddenly becomes very heavy one day or gradually becomes heavier, it might be due to a lack of power steering fluid. Similar to engine oil, the power steering fluid needs to be replenished. Low tire pressure: Low tire pressure increases the contact area between the tire and the road surface, leading to greater friction and making steering more difficult, resulting in a heavier steering wheel. This is not conducive to driving safety, and the tire pressure should be promptly replenished in such cases. Excessively tight bearing fit: For the rolling bearings in the steering system, if they fit too tightly with the sliding bearings, it can prevent proper lubrication and operation of the bearings. This can lead to sticking phenomena, causing the steering wheel to become heavy. In such cases, the mechanical parts and the power steering system should be inspected, or checked for potential oil leaks or damaged intake seal components.

16

0

Share

What does an exclamation mark on the steering wheel mean?

The appearance of an exclamation mark on the steering wheel indicates the Electronic Power Steering (EPS) indicator light, which disappears immediately after the engine starts. The Electric Power Steering (EPS) system is a power steering system that directly relies on an electric motor to provide auxiliary torque. Compared to the traditional Hydraulic Power Steering (HPS) system, the EPS system offers many advantages. The EPS mainly consists of a torque sensor, vehicle speed sensor, electric motor, reduction mechanism, and Electronic Control Unit (ECU). The Electric Power Steering system has evolved from the traditional mechanical steering system. It utilizes the power generated by an electric motor to assist the driver in steering operations. The system is primarily composed of three major components: signal sensing devices (including torque sensor, steering angle sensor, and vehicle speed sensor), steering assist mechanism (electric motor, clutch, reduction transmission mechanism), and electronic control device. The electric motor operates only when assistance is needed. When the driver operates the steering wheel, the torque and steering angle sensor generates corresponding voltage signals based on the input torque and steering angle. The vehicle speed sensor detects the speed signal, and the control unit issues commands to control the electric motor's operation based on the voltage and speed signals, thereby generating the required steering assistance.

16

4

Share

How Many Wheels Need Snow Chains Installed?

For front-wheel drive vehicles, two snow chains should be installed on the front wheels. For rear-wheel drive or four-wheel drive vehicles, it is recommended to install chains on all four wheels. If snow chains are only installed on the drive wheels, the front wheels will lack sufficient traction, resulting in a loss of steering control. Precautions for installing snow chains: After installation, inspect the snow chains to ensure the connections at the joints are secure and that there are no areas where the chains are not in contact with the tire. Using snow chains of improper size or installing them incorrectly can damage the vehicle's tires, suspension, or body. Therefore, always choose snow chains that match your tire size to ensure safety. When installing snow chains, park the vehicle on a flat surface away from traffic, turn on the hazard warning lights, and place a warning triangle behind the vehicle. Steps for installing snow chains: Determine the vehicle's drive type (front-wheel or rear-wheel drive). A jack can be used to assist with installation. Place the snow chain over the tire with the hook side facing outward. Attach the inner hook, then rotate the tire to the appropriate position, being careful not to crush any chain components. Move the joint section inward and attach the inner joint hook. Adjust the snow chain to align with the tire's center. Attach the W-hook and then secure the round straps to the hooks in a diagonal pattern.

5

1

Share

Can the steering gear leak oil?

The steering gear can leak oil because the rubber seals lose plasticizers due to prolonged exposure to alternating hot and cold temperatures. This results in the seals shrinking, hardening, and losing elasticity, and in severe cases, even cracking. Oil leakage is inevitable. Solutions for steering gear oil leakage: Repairing a leaking steering gear requires disassembly. However, if the disassembly and repair are not performed properly, it may not only fail to fix the issue but also cause more problems. In such cases, it is more reliable to replace the steering gear entirely. Most steering gear oil leaks are caused by corrosion and aging of the oil seals, especially in cars older than three years. Over time, rubber seals harden and age, exacerbated by prolonged exposure to temperature changes, worsening the condition. When seals shrink, harden, and lose elasticity, oil leakage occurs. If not replaced in time, prolonged leakage can lead to excessive wear of the steering gear rack, causing steering or driving noises. In severe cases, it can make steering heavier and result in loss of power steering. Causes of steering gear oil leakage: Oil leakage from the screw holes of the steering gear: This may occur if the screw holes are penetrated or if the screws used during repair are too long, causing the area to crack. Oil will then slowly seep out along the threads. Improper casting leading to oil leakage from the bottom cover: If the bottom cover surface is uneven or the guide pipes are not perpendicular, it can result in insufficiently tight riveting or misalignment of the guide pipes. Oil leakage due to the use of cardboard gaskets: Cardboard has a strong absorption capacity for oil. If the bolts are not tightened properly or unevenly, it can cause uneven placement of the side and bottom covers, leading to deformation and oil leakage.

5

Share

How to open the G-Class door from the inside?

What Causes Steering Wheel Stiffness?

How Long Does a Leather Steering Wheel Last?

What Causes Heavy Steering Wheel?

What does an exclamation mark on the steering wheel mean?

How Many Wheels Need Snow Chains Installed?

Can the steering gear leak oil?

Can the car still be driven when the ABS light is on?

What is the vehicle speed at 2000 RPM?

Should You Use a Steering Wheel Cover?

What car has a horizontal bar on the steering wheel?