How to Open the Fuel Tank on the Envision?

How Often Should the Brake Fluid of a Mercedes-Benz Be Replaced?

For the Mercedes-Benz E-Class, it is recommended to replace the brake fluid every 2 years, but this interval can vary depending on usage. Brake fluid is somewhat corrosive and highly hygroscopic. Many service stations now have specialized tools to test the water content in brake fluid, so you can perform a test to determine if replacement is necessary. Below is an introduction to the braking system: 1. Brake Fluid: The purpose of brake fluid in the Mercedes-Benz E-Class Brake fluid, also known as automotive brake fluid, was used in early cars with mechanical drum brakes. With the advancement of hydraulic technology, safe and reliable hydraulic braking systems became widely used in vehicles. Automotive brake fluid is the liquid used in the hydraulic braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders, causing the brake pads to expand and stop the vehicle. When the brake is released, the return springs pull the brake pads back to their original position. 2. Function: Brake fluid serves as a force transmission medium throughout this process. In the automotive braking system, brake fluid acts as a transmission medium. When the brake pedal is pressed, with the assistance of the vacuum booster, it pushes the master cylinder, which in turn pushes the brake fluid, transmitting the force from the foot to the wheel cylinders at each of the four wheels. The wheel cylinders then push the brake pads, which squeeze the brake discs to generate braking force.

10

3

Share

How to reset the tire pressure monitoring on a 2019 Cayenne?

Method to reset the tire pressure monitoring on a 2019 Cayenne: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data and automatically clear the previous data. Finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Precautions for inflating tires: Always use a pressure gauge to check the pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature and affects pressure. Check the valve stem. If the valve stem and valve core do not fit smoothly, or if there are protrusions, depressions, or other defects, it may be difficult to inflate or measure the pressure. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil, as this can deteriorate and damage the inner tube rubber. Do not exceed the standard pressure excessively and then deflate, nor should you over-inflate due to prolonged inability to inflate while traveling. Exceeding the standard pressure too much can overstretch the cords, reducing their strength and affecting the tire's lifespan.

11

2

Share

What is the function of automotive urea solution?

The function of automotive urea solution is to catalytically reduce nitrogen oxides in the exhaust gas into harmless nitrogen and water in the selective catalytic reduction system of diesel vehicles, thereby achieving energy-saving and environmental protection effects. It should be noted that when the remaining amount of automotive urea is lower than 20%, it must be replenished as soon as possible, otherwise the system will limit the operation of the engine, and exhaust pollution will also become more serious. Automotive urea is mainly obtained from the purification of industrial urea, and the main principle is: 1. At a temperature of 70 to 75 degrees Celsius, urea undergoes hydrolysis in an aqueous solution; 2. At a temperature below 30 degrees Celsius, urea recrystallizes from the aqueous solution; 3. Each cycle of hydrolysis and crystallization significantly improves the purity.

7

3

Share

What is Motor Vehicle Damage Insurance?

Motor vehicle damage insurance refers to vehicle damage insurance. The following is a related introduction to vehicle damage insurance: 1. Benefits: If the insured vehicle is damaged due to an accident covered by the insurance policy and requires repair costs, as well as reasonable rescue measures taken by the owner for the vehicle, compensation can be obtained. When rescuing the insured vehicle, the insurance company should compensate for the reasonable costs incurred by using others' firefighting equipment. 2. Meaning: Vehicle damage insurance refers to the insurance coverage for losses to the insured vehicle caused by natural disasters (excluding earthquakes) or accidents within the scope of the insurance policy. It is often the most expensive insurance type in private car insurance policies.

19

4

Share

How to Extract Gasoline from a Sedan?

Methods to extract gasoline from a sedan: 1. Find a gasoline can or other airtight container; 2. Find a sufficiently long transparent tube; 3. Place the can on the ground near the car's fuel tank; 4. Insert one end of the tube into the car's fuel tank and blow air from the other end; 5. Suck air from the other end of the tube with your mouth; 6. Quickly pinch the tube before gasoline enters your mouth; 7. Place the end of the tube into the can to extract the gasoline. The automobile fuel tank is the full name of a sedan's fuel tank. Automobile fuel tanks can be categorized into iron fuel tanks and aluminum alloy fuel tanks based on material. Aluminum alloy fuel tanks have higher corrosion resistance than iron fuel tanks.

3

Share

What causes insufficient power when climbing hills in the Leopaard CS10?

The reasons for insufficient power when climbing hills in the Leopaard CS10 are as follows: 1. Dirty throttle: A fault caused by excessive dirt in the car's throttle body. In this case, simply cleaning the throttle and then rematching it can solve the problem. 2. Intake system failure: A leak in the car's intake system causes the engine control unit to detect the issue, triggering the EPC warning light and resulting in insufficient power when climbing hills. Replacing the faulty intake system components can resolve the issue. 3. Brake system malfunction: A fault in the car's brake system keeps it in a braking state. It requires inspection and replacement at a 4S shop.

5

Share

How to Open the Fuel Tank on the Envision?

How Often Should the Brake Fluid of a Mercedes-Benz Be Replaced?

How to reset the tire pressure monitoring on a 2019 Cayenne?

What is the function of automotive urea solution?

What is Motor Vehicle Damage Insurance?

How to Extract Gasoline from a Sedan?

What causes insufficient power when climbing hills in the Leopaard CS10?

Which turn signal should be turned on when exiting the highway?

Can the Tiida's wipers be manually lifted?

How fast do you drive on the highway?

What are the steps for removing iron particles from car body?