···
Log in / Register

How to open the fuel tank on the 10th-generation Civic?

4 Answers
McNolan
07/29/25 11:39am
The method to open the fuel tank cap of the 10th-generation Civic is as follows: Turn off the engine, press the indicated area in the direction of the arrow to release the fuel filler door, slowly unscrew the fuel filler cap. If a hissing sound is heard, wait until it stops, then slowly turn the knob to open the fuel filler cap. Below is an introduction to the 10th-generation Civic: 1. Safety features: It adopts Honda's new HONDASENSING (Safety Sense) driver assistance system. This system not only senses external environmental information but also identifies the driver's operational intent and vehicle status. Based on this comprehensive data, it precisely coordinates control over braking, steering, etc., thereby achieving excellent driving assistance functions. 2. Configuration: The new model comes standard with LED daytime running lights/tail lights/fog lights, a full LCD instrument panel, a multifunction steering wheel, one-touch start and keyless entry, a start-stop system, 6 airbags, VSA vehicle stability assist system, and a 7-inch smart screen connectivity system.
Was this review help?
16
5
Share
StZane
08/13/25 8:00pm
I've been driving a 10th-gen Civic for over a year, and opening the fuel filler cap is a regular occurrence. From the driver's seat, if you look down at the area near your left foot, basically on the floor close to the door frame, there's a small lever marked with a fuel icon or the word 'Fuel'. A gentle pull automatically pops open the fuel filler cap – quite convenient. For first-time drivers, remember to check if the door locks are released first, otherwise it might get stuck. Here's a little tip: when refueling, don't just place the cap anywhere as it might get dirty or fall on the ground; simply hang it on the side. Regularly wipe the lever with a dry cloth to prevent dust buildup and ensure smooth operation. The design is pretty foolproof – even beginners shouldn't worry, just try it once or twice to get familiar.
Was this review help?
5
5
Share
Expand All
LaSerenity
10/08/25 5:42am
I drive a 10th-gen Civic myself, and I find opening the fuel tank cap super easy. Just look for the lever on the left side while sitting in the car, roughly near the floor by the door—you’ll spot it if you bend down. It looks like a small hook. Give it a gentle pull, and the fuel cap pops open. The whole thing takes a second or two. If the car is locked, you’ll need to press the remote key first. When refueling, don’t forget to close the cap properly—listen for the click to confirm it’s locked. Oh, and avoid yanking it hard inside the car; it’s not a strength test. Be gentle to prevent snapping the cable. If you run into issues, like it won’t open, try resetting the car locks or checking the manual—usually, no need for a mechanic.
Was this review help?
5
3
Share
Expand All
DeJames
11/21/25 7:01am
To open the fuel tank on the 10th-gen Civic, I typically locate the mechanical lever near the driver's footwell, which connects to the fuel cap's latch mechanism. Pulling it releases the lock, and the cap opens automatically due to its anti-misoperation design. The car just needs to be stationary during operation, and it's better to turn off the engine. If it won't open, check if the door locks are disengaged or if the lever is jammed with dust. Cleaning usually resolves it. Simple, reliable, and low-maintenance.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

How to Set Up Automatic Folding for Q5 Rearview Mirrors?

Audi integrates the operation of rearview mirrors on the control buttons located on the front left door. Rotate the knob to the 10 o'clock position to adjust the front and rear mirrors, allowing for up, down, left, and right adjustments of the mirror surface. Rotate the knob to the 2 o'clock position to adjust the front and rear mirrors, enabling up, down, left, and right adjustments of the mirror surface. Rotate the knob to the 4 o'clock position to activate the rearview mirror heating function, which operates when the temperature is below 21 degrees. Rotate the knob to the 8 o'clock position to fold the rearview mirrors. After completing the operation, turn the knob back to the 12 o'clock position to return to the neutral position, and the mirrors will automatically unfold.
2
5
Share

What is the wading depth of the Hongqi HS5?

The wading depth of the Hongqi HS5 is 40cm. Here is some relevant information: Technology: The Hongqi HS5 is an SUV that adheres to the concept of new high-end refinement. It is equipped with an active braking system that can detect the distance between the vehicle and the vehicle (or pedestrian) ahead in real-time. When it determines that a collision is imminent, the vehicle will automatically apply the brakes to avoid or mitigate the impact. Powertrain: The Hongqi HS5 features smooth lines that outline a simple interior, complemented by a 12.3-inch integrated full LCD color display. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 224, a 6-speed AT transmission, a maximum power output of 165W, and a maximum torque of 340N/m.
13
1
Share

What is the method for removing water stains from a car roof?

Use toothpaste to clean the car body. Apply an appropriate amount of toothpaste to the water stain area, then wipe with a soft towel. Repeat several times and rinse with water. Purchase a clay bar. After washing the car next time, dry it thoroughly; this can also remove tar spots. Dishwashing liquid can also remove stubborn water stains. Apply an appropriate amount to the stained area, gently rub with your fingers, then wipe with a dish-scrubbing sponge, rinse with water, and repeat several times. Dilute hydrochloric acid with water in a plastic container, scrub with a plastic brush, then rinse with water. If some water stains remain, wipe a few more times and rinse with water. Use fine-grit polishing compound to polish the car's surface. This won't damage the paint because there is a thin layer of clear coat protection. After polishing, apply wax to prevent water stains from adhering.
19
2
Share

How to Deal with Large Areas of Peeling Paint on a Car

Clean the repair area with a towel, then wrap sandpaper around a sanding sponge and use water to smooth out any raised areas. Fill the dented areas with body filler. After the filler dries (approximately two hours), use sandpaper with water to sand the filled area. Use masking tape to cover areas that should not be painted with newspaper or tape. Prepare for painting by attaching the paint pen to the spray can and testing the color. If the paint pen solution is too thick or the color is too dark, use a pipette to add thinner into the touch-up paint pen. Pay attention to the color transition when spraying. Prepare the clear coat, replace the pipette with a new one, and attach the clear coat to the spray can. Spray the clear coat on the painted area, wait for 1 to 2 minutes, and then remove it.
1
5
Share

What to Do When a Stone Chips the Car's Windshield?

Assess the extent of the damage, then clean the area to be repaired thoroughly. Avoid using detergents or tap water to clean the damaged glass to prevent water from remaining on the repair site. Ensure the glass is level, then screw on the pressure cylinder. Align it with the bracket on the stand, secure it in position over the damaged area of the glass, extract the air from inside the chip, and then apply pressure. Observe the penetration status of the liquid from the inside of the glass. The solution should not be applied too much or too little. To speed up the flow of the repair resin, you can use a lighter to heat it. Wait for the liquid to fully penetrate, then remove the bracket. If it hasn't completely dried, apply another drop of resin and cover it with a new piece of transparent glass film to complete the repair.
17
1
Share

What is the fuel tank capacity of the Kia Forte in liters?

The Forte has a capacity of 52L. A fuel tank labeled with a "rated capacity" of 50 liters can actually hold nearly 55 liters of gasoline. Below is additional information: Features: The Forte is equipped with dual front airbags and ISOFIX child seat anchors. The front seat belts have pretensioners and load limiters, and the driver's seat features a seat belt reminder. Exterior: Overall, the Forte incorporates many design elements from the Koup concept car, using numerous straight lines and sharp edges to break away from the traditionally smooth and rounded design language of Korean cars. This fully reflects the new design philosophy that Peter Schreyer has brought to Kia models. Interior: The Forte offers two interior color options—yellow-black and all-black. The lighter tones emphasize a cozy, homey feel, while the darker shades better match the Forte's sporty character. Inside the cabin, abundant chrome accents and black high-gloss metallic paint are visible throughout. The dashboard layout is simple, rational, and convenient for the driver to operate.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.