How to Open the Fuel Tank on a Changan Honor?

1 Answers
MacKaden
07/29/25 10:23pm
There is a fuel tank switch lever located below the left side of the driver's seat in the Changan Honor. To open the fuel tank cap, pull the lever upward from below. When opening the fuel tank cap, the Changan Honor typically requires an upward pulling motion, so it's important to apply the right amount of force. Avoid using excessive force to prevent damaging the lever. Additionally, keep children from tampering with it, as a broken lever would make it impossible to open the fuel cap. Here is an introduction to the Changan Honor: 1. The Changan Honor is a new CDV commercial vehicle launched by Changan Automobile. 2. The Changan Honor measures 4360mm in length, 1685mm in width, and 1820mm in height. It offers two suspension options: a four-leaf alloy steel plate spring rear suspension and a spiral spring suspension, ensuring a more comfortable ride. 3. The Changan Honor is equipped with a 1.3L high-efficiency engine that provides ample power while saving energy. It delivers a maximum power of 68KW at 6000rpm and a maximum torque of 115N.m between 3000 and 5000rpm.
Was this review help?
11
4
Share
More Forum Discussions

What is the standard pressure for car air conditioning?

The standard pressure for car air conditioning is approximately 1.5 to 2.0 MPa for the high pressure side and 0.15 to 0.35 MPa for the low pressure side when the compressor is running at 1500 to 2000 rpm. At idle speed, the high pressure may reach around 2.5 to 2.8 MPa. Methods for maintaining the air conditioning system include: 1. Regularly cleaning the air vents; 2. Timely maintenance of the air conditioning condenser; 3. Cleaning or replacing the air filter as needed. The functions of the air conditioning system are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air to prevent bacterial growth; 4. Preventing window fogging; 5. Adjusting the cabin temperature.
5
2
Share

How to Use Hill Descent Control?

The method of using hill descent control is: 1. Before descending a slope, turn on the HDC switch, then release the brake and clutch; 2. Press the brake or accelerator to turn it off. The function of hill descent control is: By applying a brief braking force to the front axle of the car, it compensates for engine braking, thereby improving the controllability of the car when driving on steep slopes. Precautions for using hill descent control are: 1. Hill descent control must be set before use to ensure the driver focuses on driving. After setting the hill descent control, the driver should release all pedals to avoid interfering with its operation; 2. When descending a slope with hill descent control, the driver does not need to press any pedals. The car will automatically drive at a speed of about 8 km/h. During automatic driving, the driver only needs to steer the wheel properly.
10
2
Share

How many kilometers should the gasoline filter be replaced?

Gasoline filters should be replaced approximately every 40,000 kilometers. The replacement method for gasoline filters is as follows: 1. Release the residual pressure in the fuel system; 2. Remove the grounding wire near the gasoline filter; 3. Place a basin under the filter; 4. Pull out the fuel inlet pipe and then remove the adjacent fuel outlet pipe; 5. Remove the old gasoline filter for replacement. Precautions for replacing the gasoline filter include: 1. Ensure the overall sealing of the air filter and cabin air filter; 2. Use the gasoline grade specified by the vehicle manufacturer. The gasoline filter, also known as the fuel filter, functions to remove iron oxide, dust, and solid impurities contained in the fuel, prevent fuel system blockages, reduce mechanical wear, ensure stable engine operation, and improve reliability.
8
1
Share

Reasons for Transmission Shaft Oil Leakage?

There are several reasons for transmission shaft oil leakage: 1. Aging of oil seals. Like the engine and transmission, the transmission shaft is a mechanical transmission component that requires lubrication. Most oil leakage issues are caused by problems with the oil seals. 2. If the oil leakage is from the transmission shaft dust cover, it is mostly due to loose clips. Tightening the screws has little effect, and over time, oil leakage will still occur. To completely eliminate the oil leakage, the corresponding parts of the transmission shaft and transfer case need to be disassembled and reassembled properly. Below is additional information: 1. The transmission shaft is a crucial component in the automotive drivetrain that transmits power. Its function is to work together with the transmission and drive axle to transfer the engine's power to the wheels, generating driving force for the vehicle. 2. If oil leakage occurs, it is important to promptly take the vehicle to a repair shop for inspection.
7
5
Share

What do China 5 and China 6 mean in automobiles?

China 5 and China 6 in automobiles refer to the national fifth and sixth stage emission standards. Automobile emission standards regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. The emission standards include: China 1, China 2, China 3, China 4, China 5, and China 6 emission standards. Methods to check a vehicle's emission standard are: 1. Check the vehicle conformity certificate: The emission standard is clearly stated in the vehicle conformity certificate; 2. Look for the vehicle's accompanying documents: Find the emission standard in the vehicle information section; 3. Check the conformity certificate: It indicates the corresponding emission standard; 4. Inspect the vehicle's environmental protection label: There is a clear mark on the back of the environmental protection label on the vehicle's front windshield, which shows the vehicle's emission standard.
2
2
Share

How to Quickly and Easily Identify a Flood-Damaged Car?

Simple and quick methods to identify a flood-damaged car are: 1. Open the hood and check if there is mud residue on the radiator, air conditioning heat sink, or the front panel of the radiator; 2. Inspect small components near the engine, such as the charging motor, starter motor, wire sockets, and the seams around the wheel wells for mud; 3. Check the springs and inner fabric of the front and rear seats for mud residue and a musty smell; 4. Examine the hidden seams around the rear wheel wells in the trunk for mud residue. The effects of a car being flooded include: 1. The inner door panels, air conditioning ducts, crankcase, and exhaust vents in the differential may become moldy and corroded; 2. The seats and headliner fabric may retain stubborn stains and develop mold; 3. The lubricating grease in the wheel bearings and half-shafts may degrade and deteriorate after being soaked.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.