···
Log in / Register

How to open the fuel tank of the Tiguan L?

4 Answers
VonJames
09/01/25 2:57am
Tiguan L uses a press-type fuel tank cap. After the vehicle is turned off, you can open the fuel tank cap by pressing it. The fuel tank cap refers to the box on the car used to store gasoline. It is square in shape, made of stainless steel, and has excellent sealing. There is only a small circular opening, which is only as big as a bottle cap, making it convenient for storage. Below are three common ways to open the fuel tank cap for general household cars: 1. Mechanical key opening: This method is more complicated, so it is rarely used in household cars nowadays. It is usually found in more rugged SUVs. 2. In-car switch type: The more common method now is having a switch button inside the car, which is more convenient compared to the mechanical key method. 3. Direct press-type: This is the most convenient among the three methods of opening the fuel tank cap, requiring no operation from the car owner, allowing the gas station attendant to refuel directly.
Was this review help?
4
4
Share
Thaddeus
09/13/25 5:54am
I've been driving the Tiguan L for almost two years, and opening the fuel tank is actually super simple. Sit in the driver's seat, look down near your left foot close to the bottom of the center console, and you'll find a small plastic lever. Just give it a gentle pull, and the fuel tank cap will pop open automatically. The whole process takes just a second or two—it's convenient and quick. Remember to turn off the engine and engage the handbrake before refueling to ensure safety. The fuel cap is located on the right rear side of the car, designed very user-friendly so that when you pull up to the gas station, it directly faces the fuel nozzle. Occasionally, the lever might get stuck, like from dust buildup or insufficient lubrication in cold weather. Just clean off the dust and add some lubricant. Avoid pulling too hard, as it could damage the cable or connecting parts. The Tiguan L's system is reliable and durable, and you'll get used to it after doing it once. Always remember to securely close the fuel cap after refueling and check if the sealing ring is intact to prevent fuel leaks.
Was this review help?
9
5
Share
Expand All
McMadeline
10/27/25 6:41am
From my perspective as a technical enthusiast, the fuel tank opening mechanism of the Tiguan L is quite ingeniously designed. There's a mechanical lever on the left side near the driver's footwell—pulling it activates the fuel flap's solenoid valve via a cable, releasing the latch to pop open. This avoids the risk of electronic control failures, making it simple yet effective. When refueling, I always turn off the engine and check the battery status first to prevent voltage fluctuations from affecting the system. The fuel flap is located at the rear right side of the car, easy to spot and access. Higher trim models might feature a remote button on the key fob, but the lever mechanism is the most universal. Regular maintenance of the lever—cleaning dust and applying lubricant once a year—prevents rust and jamming. Safety at gas stations is crucial too; operate gently and avoid jerky pulls. This mechanical setup boasts high durability, with cable aging being the most common failure point—just visit a specialized repair shop for inspection.
Was this review help?
8
4
Share
Expand All
KayleeDella
12/10/25 6:57am
I just got my hands on the Tiguan L not long ago, and opening the fuel tank is a piece of cake. Sitting in the driver's seat, there's a lever near the floor on the lower left side—just give it a pull, and the fuel tank cap pops right open. The first time, it took me a few minutes to figure it out, but once you try it, it's easy. Before refueling, I always make sure to turn off the engine and park steadily—safety first. The cap is designed on the right rear of the car, making it convenient to align with the fuel nozzle. Remember, unlocking with the key is for the doors; to open the fuel tank, you need to use that lever—don't mix them up. After a few tries, you'll get the hang of it, and refueling becomes highly efficient. It's a newbie-friendly design, but always check that the cap is tightly closed and there are no leaks after each refueling. Once you get used to it, driving life becomes smoother with no hassles.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

What type of engine oil should be used for the Santana 1.6?

The Santana 1.6 uses 5W40 engine oil. The functions of engine oil include: lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Taking the 2021 Santana as an example, it is a compact car with body dimensions of: length 4475mm, width 1706mm, height 1469mm, wheelbase of 2603mm, fuel tank capacity of 52.8 liters, and trunk capacity of 466 liters. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, and is paired with a 5-speed manual transmission.
8
2
Share

What are the methods to distinguish between good and bad batteries?

Methods to distinguish between good and bad batteries are: 1. Inspect the appearance: Check if the battery casing is bulging, leaking, has broken separators, or corroded terminals. If these signs are present, it indicates the battery is dead; 2. Test the voltage: After charging for two hours, measure the voltage of individual battery cells every 20 minutes. If the voltage is below 13, it indicates a problem. During discharge, test every 10 minutes in three intervals. If the discharge time is faster than other batteries and the voltage drops below 10V, the battery is faulty; 3. Check for water loss and blackening: After charging the battery for 36 hours, if the charger's red light remains on, it indicates severe water loss. Open the battery's top cover to reveal six round holes. Check the color of the electrolyte in each hole. If it appears black, it means the lead powder from the plates has fallen off, indicating the battery is dead.
17
3
Share

What Documents Are Required to Drive with Temporary License Plates?

Documents required to drive with temporary license plates include: the purchaser's ID card, vehicle purchase invoice, compulsory traffic insurance policy, and vehicle factory certificate. Temporary license plates can be categorized into: 1. Temporary plates for administrative jurisdiction areas; 2. Temporary plates for cross-administrative jurisdiction areas; 3. Temporary plates for testing purposes; 4. Temporary plates for special-type motor vehicles. Temporary license plates are paper motor vehicle plates that permit temporary road use, also known as temporary driving plates. Conditions for applying for temporary plates: 1. Driving the vehicle from the place of purchase to the place of use; 2. Vehicle transfer with official plates already surrendered; 3. New vehicles without official plates in the local area needing to travel elsewhere for modifications; 4. Purchasing a vehicle locally to drive elsewhere; 5. Needing temporary trial use before fixing vehicle registration.
18
5
Share

How to Use Car Air Conditioning Properly?

Car air conditioning should be used properly as follows: 1. Choose an appropriate temperature setting; 2. Do not immediately activate the internal circulation when entering the car in summer; 3. Avoid running the air conditioning for extended periods; 4. Do not adjust the air vent direction arbitrarily; 5. Use the air conditioning in a fully enclosed state; 6. Avoid resting or sleeping for long periods in a stationary car with the air conditioning on. The functions of car air conditioning are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the cabin to an optimal state; 2. To provide a comfortable environment for passengers, reducing travel fatigue; 3. To create favorable working conditions for the driver, ensuring driving safety.
16
4
Share

What are the types of automotive body structures?

Automotive body structures are divided into: body-on-frame, semi-monocoque, and monocoque. Body-on-frame refers to a vehicle with a rigid frame, also known as a chassis frame, where the frame and body are flexibly connected via springs or rubber pads. The engine, part of the transmission system, and body assembly components are mounted on the frame via suspension systems. Monocoque refers to a structure where the front end, side panels, rear end, floor panel, engine, front and rear suspension, and part of the transmission system are assembled onto the body, with the body load transmitted to the wheels via the suspension system. Semi-monocoque body is where the body and frame are rigidly connected via bolts, rivets, or welding, with the body bearing part of the frame's load.
9
4
Share

Can I Install a Car License Plate Myself?

You can install a car license plate yourself. The installation method is as follows: 1. Take out the screws for the license plate and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover the anti-theft caps and press them into place. The functions of a license plate are: 1. It serves as an identification mark for the vehicle; 2. It indicates the region to which the vehicle belongs; 3. The owner and registration information of the vehicle can be traced based on the license plate. The structure of a license plate consists of: 1. A Chinese character, which is the abbreviation of the province where the vehicle is registered; 2. An English letter, representing the prefecture-level city code of the vehicle's location; 3. A sequential number.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.