How to Open the Fuel Tank of the Tayron?

2 Answers
LaylaFitz
07/25/25 2:37am
Next to the driver's seat, there is a button with a fuel pump icon, which is the fuel tank cover switch. Press it to open the fuel tank cover. Here are some descriptions about the fuel tank: 1. The fuel tank is a container in the car used to store fuel. It contains components like coolers and must have sufficient volume to hold gasoline. 2. Besides storing gasoline, the fuel tank also serves to settle impurities in the gasoline and dissipate heat to separate bubbles from the gasoline liquid. 3. Fuel tanks can be divided into open-type and closed-type. Cars generally use open-type fuel tanks due to their simple structure and easy installation, while closed-type tanks are typically used for storing inert gases under certain pressure. 4. Regular thorough cleaning of the fuel tank is necessary. Proper maintenance can significantly extend the fuel tank's lifespan.
Was this review help?
4
5
Share
SkylarFitz
08/10/25 4:39pm
I just started driving the Tayron and learned how to open the fuel tank cap when refueling. The specific steps are: first, park the car steadily and turn off the engine, then unlock the doors with the key or press the unlock button on the driver's side. Walk to the fuel tank cap, usually located on the right side of the car, and gently press its edge—the cap will pop open easily. Be sure to handle it gently without excessive force. After refueling, make sure to close and fasten the cap tightly to prevent dust from entering and affecting the fuel system. For routine maintenance, it’s advisable to check if the cap’s sealing ring has aged to avoid fuel leaks. Paying attention to such small details can extend the vehicle’s lifespan and save on repair costs. Develop good habits by ensuring the surroundings are safe before each refueling to minimize accident risks.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Is it necessary to go to a 4S shop to replace spark plugs?

Replacing spark plugs does not necessarily require going to a 4S shop. If you have some hands-on skills, you can completely replace them yourself. There is no need to visit a 4S shop for such small components, and you can also save on labor costs. To replace spark plugs, you need to prepare the necessary tools, including 10mm, 14mm, and 16mm sockets, a long extension bar, a ratchet wrench, a magnetic rod, a towel, etc. Steps to replace spark plugs: 1. After the engine has completely cooled down, unplug the high-voltage coil connector, then use a 10mm socket to remove the fixing bolts. After removing the high-voltage coil, you can see the spark plug in the cylinder; 2. Depending on the size of the spark plug nut, use a 14mm or 16mm socket with a long extension bar to turn counterclockwise to loosen it. After loosening, use a magnetic rod to pull out the spark plug; 3. Use the magnetic rod to hold the new spark plug and insert it into the hole, then tighten it.
5
3
Share

Does the automatic shutoff of a car's fuel tank mean it's full?

When a car's fuel tank automatically shuts off, it indicates that the tank is full. Nowadays, gas stations commonly use self-sealing fuel nozzles, which automatically trip when the tank is full. These self-sealing nozzles feature an independent, sealed pressure-sensing system integrated with the nozzle body. When the main valve of the nozzle is opened, allowing high-speed fuel flow through the return valve, the unique structural design of the return valve assembly creates negative pressure within the pressure-sensing system. Under normal operating conditions, this negative pressure is continuously balanced by air replenishment through a vent tube located inside the fuel outlet pipe, maintaining a state of equilibrium in the pressure above and below the sensing diaphragm. However, when the fuel level rises to cover and block the vent tube opening, the negative pressure in the sensing system rapidly increases. This disrupts the pressure balance on either side of the diaphragm, causing it to move toward the negative pressure side along with the switch mechanism, thereby disengaging the nozzle latch. As a result, the fuel nozzle completes its self-sealing shutdown action within 0.3 seconds.
18
1
Share

What are the instructions for the center console buttons of the 2021 Buick Excelle?

2021 Buick Excelle center console button instructions are as follows: Electronic Stability Control (ESC) Function: The system is enabled by default. It is generally not recommended to turn it off unless driving on slippery surfaces such as rain or snow. Auto Start-Stop Function: At traffic lights, the engine is temporarily shut off. When the driver's foot leaves the brake pedal, the vehicle will restart. Recirculation/Fresh Air Function: Recirculation means the air inside the car is heated or cooled and then recirculated back into the car, while fresh air allows outside air to enter the car. Use recirculation mode during traffic jams, in tunnels, or when outside air quality is poor. On highways, periodically switch from recirculation to fresh air mode, with recirculation time preferably not exceeding 1 hour. Temperature Zone Synchronization Function: When the temperature zone synchronization is turned on, changing the temperature in the driver's zone will automatically adjust the other zones to the same temperature. When synchronization is turned off, each zone can be set individually to meet the needs of passengers in different positions.
5
2
Share

Can I renew my driver's license in advance after applying for a delayed renewal?

You can renew your driver's license in advance after applying for a delayed renewal. In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the required information. The new license is usually delivered by mail. Visit the "Police-Medical-Post" service point at a postal office to process the renewal. The entire process, from registration and medical examination to the production of the new license, takes only half an hour. Currently, this service is available in only a few cities, such as Hangzhou. License renewal and inspection must meet the following conditions: For holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck licenses, there should be no demerit points in the current scoring cycle, or for holders of other types of driving licenses, the demerit points should not exceed 12 in the current scoring cycle; For holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck licenses who have demerit points in a scoring cycle, or for holders of other types of driving licenses who have been involved in a traffic accident resulting in death and bear equal or greater responsibility without having their license revoked, they must have completed the required inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the requirements for driving; The driver's license must not be under any legal seizure, detention, suspension, revocation, cancellation, or annulment.
7
0
Share

What is the tire speed rating?

The tire speed rating refers to the maximum speed at which a tire can carry a specified load under defined conditions. Most tires currently on the market have ratings ranging from S to Y, where W represents a speed of 270 km/h and V represents 240 km/h. Generally, the higher the tire speed rating, the better its heat resistance, as it must withstand both the heat generated by the tire itself at maximum speed and the external environmental heat. Functions of tires: 1. Transmit driving force, braking force, and steering force to enable vehicle control; 2. Support the vehicle load; 3. Reduce and absorb vibrations and impacts during driving.
12
3
Share

How Long Can the Envision Battery Last?

Envision battery can last for 3 years. The functions of the battery are: 1. To supply power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. To power the vehicle's electrical equipment when the engine is stopped or idling at low speed; 3. To participate in power supply when the power demand exceeds the generator's supply capacity; 4. To stabilize voltage and protect the vehicle's electronic equipment. Taking the 2021 Envision as an example, its body dimensions are: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, and body weight 1610kg.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.