How to Open the Fuel Tank of a Magotan?

When Should the First Car Maintenance Be Done?

Car first maintenance should be done around half a year or 3,000 to 5,000 kilometers. The first maintenance refers to the initial service after the vehicle has been driven. The items included are: 1. Changing the engine oil, oil filter, air conditioning filter, and air filter; 2. Checking the levels of coolant, battery fluid, and windshield washer fluid; 3. Inspecting the brake and clutch fluid levels, as well as the power steering fluid level; 4. Checking for oil leaks at all oil pipe interfaces in the system; 5. Examining the front and rear lights; 6. Checking tire pressure and wear, and tightening screws to the specified torque. The precautions for the first car maintenance are: 1. Make an appointment with the 4S store in advance; 2. Bring the vehicle license and maintenance manual.

16

5

Share

Why is the ETC display screen not lighting up?

The reasons why the ETC display screen is not lighting up are: 1. It is in standby mode; 2. The ETC device has no power. The methods to determine if the ETC is functioning normally are: 1. Remove the ETC card; 2. Reinsert the ETC card into the electronic tag; 3. After hearing a beep sound, if the electronic tag screen displays "Toll Card" or the balance, it proves that the ETC is in normal working condition. ETC is an automatic toll collection system for highways or bridges. It uses dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station. By leveraging computer networking technology and backend settlement processing with banks, it achieves the purpose of allowing vehicles to pass through highway or bridge toll stations without stopping to pay toll fees.

9

3

Share

How to Turn on the Fog Lights on a Corolla?

To turn on the fog lights on a Corolla, follow these steps: 1. Locate the fog light switch button on the lighting control stalk on the left side of the steering wheel; 2. Turn the switch one notch upward to activate the front fog lights; 3. Turn the switch two notches upward to activate the rear fog lights. Fog lights are used in rainy or foggy weather conditions. Their main feature is strong penetration in fog, making it easier for other vehicles or pedestrians to notice them in low visibility conditions, effectively preventing accidents. The Corolla is a compact car from Toyota, with body dimensions of 4630 mm in length, 1775 mm in width, and 1480 mm in height. It has a wheelbase of 2700 mm, a fuel tank capacity of 55 liters, and a trunk capacity ranging from 426 to 452 liters.

10

1

Share

What do the letters on car tires mean?

Here is an example to explain the meaning of numbers and letters in tire specifications: 225/60/R17/99H1. 225: Represents the section width, simply understood as the width of the tire tread. 2. 60: Represents the aspect ratio, simply understood as the height of the tire sidewall. 3. R: Represents the tire type code, where R stands for radial tire. 4. 17: Represents the rim diameter, indicating the tire is suitable for 17-inch rims. 5. 99: Represents the load index of the tire, which is the maximum weight the tire can bear. 99 means it can bear a maximum weight of 775KG. 6. H: Represents the speed rating of the tire, which is the maximum speed the tire can handle. H means it can handle speeds up to 210KM/H.

3

5

Share

What are the functions of paint coating?

The functions of paint coating are: 1. Resisting oxidation and aging of the paint surface; 2. Effectively resisting UV radiation; 3. Corrosion and high temperature resistance; 4. Scratch resistance and easy cleaning; 5. Protecting the brightness of the car paint surface, forming a mirror effect for 3 to 5 years or more; 6. Ultra-environmental, using water-based environmentally friendly materials, which do not oxidize themselves and will not cause secondary pollution to the car paint. The method of paint coating is: 1. First, clean the car body thoroughly; 2. Dehydrate and dry the entire car; 3. Apply the coating agent evenly on the car paint; 4. Use a dry towel to evenly wipe the coating liquid on the car paint; 5. Apply a water-repellent promoter.

18

5

Share

What are the precautions for using car wipers?

Introduction to precautions for using car wipers: 1. Do not operate the wipers without spraying windshield washer fluid, as dry wiping can easily cause abnormal wear of the wiper rubber and damage to the wiper motor. 2. If the windshield is too dirty, it is best to first gently clean the dirt on the windshield with a dry cloth to reduce unnecessary wear on the wipers. 3. When the wiper blades are not wiping effectively, try soaking the blades in water first, then sand them back and forth with water sandpaper, rinse them clean with water, reinstall them on the windshield, and then test the wiping. If there are still uneven areas, you can try this method several times. This method is mostly used when the wiper blades are slightly damaged. 4. In rainy southern regions where wipers are used more frequently, the replacement cycle can be shortened according to local conditions to ensure a clear and clean view during rainy weather.

10

1

Share

How to Open the Fuel Tank of a Magotan?

When Should the First Car Maintenance Be Done?

Why is the ETC display screen not lighting up?

How to Turn on the Fog Lights on a Corolla?

What do the letters on car tires mean?

What are the functions of paint coating?

What are the precautions for using car wipers?

What is the actual fuel consumption of the Odyssey 2.4?

What is the difference between automatic and manual air conditioning in cars?

Does the Tiguan L Comfort Edition have a sunroof?

What brand are the tires on the Volkswagen Tayron?