How to Open the Fuel Tank Cap on the Crosstour?

How to Set Cruise Control on Roewe 550

To set the cruise control on the Roewe 550: Press the control switch to activate cruise control standby, accelerate to the desired speed, and then push the control lever downward to set the cruising speed. To cancel cruise control, you can lift the control lever upward, turn off the cruise control master switch, press the accelerator pedal, or lightly tap the brake. The Roewe 550 is SAIC's first model based on the DIS full-digital simulation development system. The dimensions of this car are 4648mm in length, 1827mm in width, and 1483mm in height, with a wheelbase of 2705mm. The Roewe 550 is equipped with the TST 6-speed oil-cooled dual-clutch automatic transmission system, Inkanet 3G digital intelligent network driving system, StartStop digital intelligent start-stop energy-saving system, EPB digital intelligent electronic parking system, and Configurable color-customizable digital instrument panel system.

16

2

Share

Is it necessary to warm up the car every time it starts?

It is not necessary to warm up the car every time it starts. From the perspective of the engine, modern engines are all fuel-injected engines, which no longer require warming up. However, from the standpoint of car maintenance and extending the vehicle's lifespan, warming up the car appropriately can be beneficial. When a car is parked for an extended period, various fluids in the car flow to the oil pan due to gravity. If the car is driven immediately under these conditions, the lack of sufficient lubrication can cause significant wear and tear on various components. In winter, cold weather naturally reduces the fluidity of the engine oil. Driving immediately or turning on the air conditioning under these conditions can accelerate engine wear, which over time may shorten the engine's lifespan.

13

4

Share

What to Do When Brakes Fail?

Solutions for brake failure include: 1. Use engine braking combined with the handbrake, first release the accelerator pedal, shift to manual mode and downshift from high gear to low gear sequentially; 2. Utilize terrain or emergency escape lanes to find suitable sections for deceleration, such as uphill roads or emergency escape lanes set up on highways or continuous downhill sections. Causes of brake failure include: 1. Severe overloading, which increases the vehicle's inertia under gravitational acceleration; 2. Improper operation, such as prolonged downhill driving that causes brake pads to overheat, brake drums to carbonize, and brake function to completely fail.

6

2

Share

What are the dimensions of the Tiggo 7 rear seats when folded down?

When the rear seats of the Tiggo 7 are folded down, the depth is 1605 mm and the width is 1155 mm. In terms of rear seats, this car is equipped with three-point seat belts and two child safety seat interfaces. The headrests of all three seats are height-adjustable, and the seats are wrapped in genuine leather with soft and comfortable backrests. The driver's seat supports multi-directional electric adjustment, 6-way electric adjustment, and front seat heating. The rear seats can be folded down in a split ratio. In terms of appearance, the Tiggo 7 adopts the new LifeInMotion design language, featuring an HDS dynamic water-flow body shape, which gives the vehicle a rhythmic beauty of water and creates a futuristic, forward-looking aesthetic design, presenting a new realm.

5

4

Share

What causes the tire pressure warning due to overheating tires?

The reason for tire overheating is that the car tire is overinflated, leading to high tire pressure. Hot weather causes gas expansion, which increases tire pressure. Prolonged driving generates heat through friction, raising tire pressure. Aging and wear of suspension components related to the wheels can cause misalignment of the tires, leading to uneven wear, higher temperatures, and increased tire pressure. Solutions for overheated tires: When tires overheat, the car should be stopped to allow them to cool down. It is important not to pour cold water on the tires, as this can cause cracks and shorten the tire's lifespan. Tires heat up after prolonged high-speed driving, so a slight increase in temperature and inner tire pressure is normal. During rolling, tires consume energy, part of which is absorbed and converted into heat. If the heat is not dissipated in time, the tire temperature rises. Excessive temperature increases (above 95°C) can cause tire delamination and even tire blowouts. How tire pressure monitoring works: Tire pressure monitoring systems can be divided into two types based on their working principles: active tire pressure monitoring and passive tire pressure monitoring. The former works by setting a tire pressure value and triggering an alarm when the tire pressure is too low or there is a leak. The latter monitors tire pressure by detecting tire rotation speed, as underinflated tires rotate faster than normal tires. The role of tire pressure in cars: Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. Nowadays, many tires are filled with gases other than air. For these tires, tire pressure requirements are more stringent. For tires filled with air, pressure varies with seasonal changes. Tire pressure is closely related to a car's performance, affecting comfort, load capacity, and tire lifespan.

10

5

Share

What is the function of a carburetor?

The function of a carburetor is to mix a certain proportion of gasoline with air under the vacuum generated by the engine's operation. As a precision mechanical device, the carburetor utilizes the kinetic energy of the incoming air stream to atomize the gasoline, playing a crucial role in the engine—often referred to as the heart of the engine. A complete carburetor assembly should include a starting device, an idle device, a medium-load device, a full-load device, and an acceleration device. The carburetor automatically adjusts the mixture ratio according to the engine's different operational states, delivering the corresponding amount of air-fuel mixture. To ensure the mixture is uniformly blended, the carburetor also has the effect of atomizing the fuel for smooth engine operation.

15

3

Share

How to Open the Fuel Tank Cap on the Crosstour?

How to Set Cruise Control on Roewe 550

Is it necessary to warm up the car every time it starts?

What to Do When Brakes Fail?

What are the dimensions of the Tiggo 7 rear seats when folded down?

What causes the tire pressure warning due to overheating tires?

What is the function of a carburetor?

What transmission does the Honda Envix use?

Where is the cabin air filter located in the Haval H5?

What is the fuel tank capacity of the Touran in liters?

Will the Engine Make a Buzzing Sound if the Engine Mount is Broken?