How to open the fuel tank cap of Volkswagen Lavida?

What Causes the Brake Pedal to Be Hard to Press When Starting the Vehicle?

The reasons why the brake pedal is hard to press when starting the vehicle are: 1. Vacuum booster pump leaks or malfunctions; 2. The brake was pressed again after the engine was turned off; 3. Too much impurity in the brake master cylinder, poor sealing, failure of the vacuum booster pump, dirty brake fluid, or gas resistance caused by mixing several types of brake fluid and heating, leakage in the brake master cylinder or wheel cylinder, or leakage in the air reservoir or pipeline interface. Precautions for pressing the brake while driving include: 1. When emergency braking, hold the steering wheel with both hands and avoid single-handed operation; 2. The free travel of the brake pedal directly affects braking time and distance; 3. Braking actions should be swift, and the brake pedal can be released when the vehicle skids; 4. Avoid emergency braking during high-speed turns. Braking should be appropriately done before turning, maintaining straight-line braking as much as possible to control the turning speed.

6

3

Share

What are the materials for engine guard plates?

Engine guard plates are available in the following materials: 1. Hard plastic/resin guard plates: Relatively inexpensive with simple production processes. They can easily handle mud erosion and minor scratches to the chassis, but their overall strength is inferior to steel plates. Although they have some toughness, they can easily break under slightly severe impacts. However, this characteristic helps the engine to sink smoothly in the event of a serious accident. It should be noted that these guard plates are prone to breaking, especially in winter, and once damaged, they cannot be repaired, failing to provide long-term protection. 2. Steel plate guard plates: The advantage of steel plates is their strong impact resistance and low cost. In severe accidents, steel plates only deform and are less likely to break. However, this can interfere with the engine's safety sinking during an accident and poses a risk of damaging the engine first due to deformation during a collision, making it a double-edged sword. 3. Aluminum alloy (titanium alloy) guard plates: The advantage of aluminum alloy (titanium alloy) plates is their lighter weight compared to steel plates. However, they are more expensive, lack elasticity, can hinder engine sinking, are prone to resonance, and have lower material strength. 4. Alloy plastic steel guard plates: The characteristics of alloy plastic steel materials include light weight, high toughness, and strong pressure resistance. They also exhibit excellent physical properties such as rigidity, elasticity, corrosion resistance, and aging resistance.

14

3

Share

What is the difference between engine displacements?

The differences between engine displacements are as follows: 1. Different maximum speeds: Different displacements result in varying maximum speeds that vehicles can achieve, also affecting their performance when fully loaded on good road surfaces. 2. Different acceleration capabilities: Different displacements lead to variations in acceleration time, performance, and distance. 3. Different climbing abilities: When facing maximum gradient slopes during driving, different displacements provide varying climbing capabilities. 4. Different fuel economies: Vehicles with different displacements offer different fuel economies, and displacement size can also reflect load-carrying capacity which relates to fuel consumption. Under the same technical level and objective conditions, larger displacements consume more fuel.

17

1

Share

How to Remove Carbon Deposits?

Methods to remove carbon deposits are as follows: 1. Engine drip cleaning method: Cut off the fuel supply, connect the carbon deposit cleaner to the engine fuel injector, and use the cleaner to soften the carbon deposits inside the engine, which are then burned and emitted. 2. Direct disassembly cleaning method: Remove the engine intake manifold, scrape off the stubborn carbon deposits, clean them, and then reassemble the vehicle. 3. Hydrogen-oxygen carbon removal machine: The hydrogen-oxygen carbon removal machine uses machine atomization to simultaneously clean the air intake and the gasoline engine cylinder. 4. Fuel additives: Using fuel additives can effectively prevent carbon deposits and slowly remove carbon particles. However, the chemical components in the additives have certain corrosiveness. Pay attention to the product's normality and usage cycle when using it.

1

5

Share

Can points be deducted for traffic violations processed on 12123?

12123 can handle traffic violation point deductions. Below is relevant information about vehicle violations: 1. Required documents for processing violations at the vehicle management office: original vehicle license of the violating vehicle, original ID card of the point-deducted driver, and original driver's license of the point-deducted driver. With these three documents prepared, the point-deducted driver can personally go to the vehicle management office or traffic police station service hall to take a number and queue for processing. 2. Processing time: According to traffic regulations, after a motor vehicle violation, it generally takes 3 to 7 days to query online or receive SMS notification, with a maximum delay of no more than 13 working days. The vehicle owner needs to go to the local traffic police station to handle the violation within 15 days after the violation occurs.

12

2

Share

What License is Required to Drive an Iveco?

Different models of Iveco require different levels of driving licenses: 1. C1 License: For Iveco models with 9 seats or fewer (as specified on the vehicle registration certificate), classified as small vehicles, a C1-level driving license is required. 2. B1 License: For Iveco models with 10 to 19 seats, classified as medium-sized buses, a B1-level driving license is necessary. 3. A1 License: For Iveco models with 20 seats or more, only an A1-level driving license is permitted. Note: The required license can also be determined by the license plate color—blue plates require a C1 license, while yellow plates require either a B1 or A1 license.

16

3

Share

How to open the fuel tank cap of Volkswagen Lavida?

What Causes the Brake Pedal to Be Hard to Press When Starting the Vehicle?

What are the materials for engine guard plates?

What is the difference between engine displacements?

How to Remove Carbon Deposits?

Can points be deducted for traffic violations processed on 12123?

What License is Required to Drive an Iveco?

Why is the ETC tag expired?

What are the reasons for the windshield washer fluid not spraying out?

What Type of License Plate is a Black License Plate?

Where is the Correct Position of the Steering Wheel?