···
Log in / Register

How to Open the Fuel Tank Cap of the New Excelle?

4 Answers
TeaganAnn
07/29/25 8:18am
Method to open the fuel tank cap of the New Excelle: The fuel tank cap switch is located on the left side of the driver's seat. Pull the fuel filler cap switch upward to release the handle and open the fuel filler cap. To open the fuel filler cap, slowly turn the cap to the left; to close the fuel filler cap, turn it to the right until you hear a click. If there is no fuel tank cap switch, press the fuel tank cap when the car door is unlocked to pop it out. Immediately wipe off any spilled fuel. The Excelle is a compact sedan under the Buick brand. The dimensions of this car are 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm. In terms of power, the Excelle is equipped with two engines: one is a 1.5L naturally aspirated engine with 113 horsepower and a maximum torque of 141 N·m; the other is a 1.3L turbocharged engine with 163 horsepower and a maximum torque of 230 N·m.
Was this review help?
17
4
Share
AubreeMarie
08/13/25 4:43am
As a seasoned driver of the new Excelle, I always make sure the car is unlocked and parked in a safe place before refueling. Then, I locate the fuel tank cap release button near the driver's side door panel. A gentle press will automatically pop the cap open—it's super easy to operate. If you find the button isn't very responsive, it might be due to dust buildup or a jam; just clean it and try again. Also, remember to turn off the engine before refueling and keep children from playing with the button—safety first. I recommend checking the button's function regularly, as an unexpectedly opened fuel cap during a trip could be dangerous. Overall, the Excelle's design is very user-friendly, unlike older models that required a key to unlock, saving both time and hassle.
Was this review help?
15
1
Share
Expand All
AxelMarie
10/05/25 5:33am
As a tech-savvy young car enthusiast, I find the fuel door release mechanism on the new Excelle pretty slick: First unlock the vehicle, then while seated in the driver's position, you'll spot the dedicated button right by your knees in the center console area. Press it, and the fuel door pops open instantly with a satisfying mechanical click - the whole process takes under a second. Pro tip: If you've used remote start, remember the button only becomes active after physically unlocking the car. When refueling, try to avoid repeatedly operating the button at the gas station to prevent potential malfunctions. This smart design blends modern functionality with efficiency, making me feel like a pro during every fill-up. Occasionally applying lubricant keeps the button action smooth, but don't overdo it to avoid damaging the mechanism.
Was this review help?
5
2
Share
Expand All
GiannaLynn
11/18/25 7:04am
As a full-time parent, refueling during daily school runs is a common occurrence, and the fuel tank cap of the new Excelle is very convenient to open. The process is just two steps: unlock the car, press the button near the driver's seat, and the cap opens. The button is usually located on the door panel or floor, making it easy to press with a simple motion. During refueling, I pay extra attention to safety, ensuring children stay away from the button to prevent accidental activation. If the button is hard to press, it might be dirty or worn out—a quick clean usually fixes it. Overall, this design is quite family-friendly, saving time and allowing me to stay focused on driving safety.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

How to turn on the external circulation of the Volkswagen Lamando?

On the car's central console, there is a button for external circulation. After pressing the external circulation button, the external circulation will be activated. The methods and scenarios for turning on external circulation are as follows: 1. If the car frequently drives in areas with good environmental conditions or often travels on highways, external circulation can be used for extended periods while the air conditioning is on. 2. Turning the air conditioning adjustment knob clockwise once activates external circulation, while turning it counterclockwise to the bottom activates internal circulation. 3. If the internal circulation is manually adjusted, it is necessary to switch to external circulation after passing through areas with poor air quality. Even if the outside air remains poor, it is advisable to periodically switch the circulation mode.
20
5
Share

What is the meaning of joint venture cars?

Joint venture cars are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital; while foreign investors contribute brands, technology, capital, talent, etc. Joint venture cars are the products of such collaborations. Foreign parties provide technology, talent, brands, etc., for domestic assembly, but the core technology is still controlled by the foreign side. Joint venture car brands include: Volkswagen, Audi, Mercedes-Benz, BMW, Skoda, Chevrolet, Hyundai, Kia, etc. Among them, the joint venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).
11
5
Share

What tires does the Geely New Emgrand use?

Geely New Emgrand uses tubeless tires, which are pneumatic tires without inner tubes, also known as low-pressure tires or pneumatic tires. Tubeless tires have high elasticity and wear resistance, as well as good adhesion and heat dissipation performance. The advantages of tubeless tires include: wear resistance, reduced weight, lower fuel consumption, slow air leakage, good heat dissipation, and long service life. The Geely New Emgrand adopts a family-style design and offers two displacement options (1.3T and 1.5L), including 12 configuration models (including the sedan version New Emgrand and the hatchback version RS). In terms of body size, the Geely New Emgrand has a length, width, and height of 4631mm, 1789mm, and 1470mm respectively, with a wheelbase of 2650mm.
8
1
Share

Where is the frame number of an electric vehicle located?

Location of the frame number for electric vehicles: 1. For large electric vehicles, it is generally found on the main frame beneath the front of the vehicle, visible by opening the box above the footboard; 2. For small electric vehicles, the frame number can be checked on the steel frame above the front wheel, usually represented in a purely numerical format. The frame number is the identification number of the entire frame of the electric vehicle, a set of characters assigned by the manufacturer to identify a vehicle. Electric vehicles, also known as electric-driven vehicles, are divided into AC electric vehicles and DC electric vehicles. Typically, electric vehicles use batteries as their energy source, converting electrical energy into mechanical movement through components like controllers and motors, with speed adjusted by controlling the current size.
14
2
Share

What does it mean when the passenger light is on in a car?

When the passenger light is on in a car, it indicates that the passenger airbag is activated. Here is an introduction to airbags: 1. The airbag is a passive safety feature in motor vehicles, which, when used in conjunction with seat belts, provides effective collision protection for passengers; 2. In the event of a car collision, the inflation system can rapidly inflate in less than one-tenth of a second, and the airbag will deploy from the steering wheel or dashboard, protecting the occupants from the impact of a frontal collision; 3. The airbag was first proposed by Hetrick and obtained the U.S. patent for 'Automobile Safety Cushion Assembly.' With the establishment of vehicle safety standards in various countries, the installation rate of airbags has been increasing; 4. Airbags can also be classified according to their installation positions, including front airbags, passenger airbags, side airbags, rear side airbags, side curtain airbags, knee airbags, etc., providing comprehensive protection for drivers and passengers.
18
5
Share

Where is the OBD interface located on the Dongfeng Peugeot 3008?

Peugeot 3008 OBD interface location: The OBD diagnostic interface of the Peugeot 3008 is located in the fuse box position below the left side of the steering wheel. Open the decorative panel and pull it out directly. The OBD interface is that black and green socket. Here is some relevant information about OBD: 1. OBD is the abbreviation of On-Board-Diagnostic, which translates to "On-Board Diagnostic System" in Chinese. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once it detects a situation that may cause excessive emissions, it will immediately issue a warning. 2. When the system fails, the malfunction indicator lamp (MIL) or check engine warning light will illuminate. At the same time, the OBD system will store the fault information in the memory. Relevant information can be read in the form of fault codes through standard diagnostic instruments and diagnostic interfaces. Based on the prompts of the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.