···
Log in / Register

How to open the fuel tank cap of the Maxus G10?

4 Answers
DeKaylee
07/29/25 11:53pm
The method to open the fuel tank cap of the Maxus G10: Press the fuel tank cap when the car is unlocked, and it will pop out. If the fuel tank cap does not pop out, it may be locked by the fuel tank cap lock on the vehicle's central console. Simply unlock it. If the latch of the fuel tank cap lacks lubrication, the fuel tank cap may also be difficult to open. In this case, it should be lubricated immediately to avoid delaying refueling. The Maxus G10 is an MPV model under SAIC Motor. The vehicle has a length, width, and height of 5168 mm, 1980 mm, and 1928 mm respectively, with a wheelbase of 3198 mm. The interior of the Maxus G10 adopts a full-view design, extending from the central console through the driving area to the front doors, forming a circular theater-style wrap-around cabin design, which is spacious and dynamic. The multi-layered central console design, cool instrument panel design, and dynamic theater-style halo design create a great in-car atmosphere. The exquisite materials and matching in the cockpit highlight a luxurious driving and riding experience.
Was this review help?
8
0
Share
AdrianaLynn
08/16/25 3:27am
I've been driving the Maxus G10 for almost two years now, and every time I refuel, it feels simple and convenient. Usually, when I sit in the driver's seat, there's a plastic lever near my left foot or on the door panel—that slightly raised thing. You just gently pull or push it, and you'll hear the fuel tank cap click open. Then, step out of the car and walk to the fuel tank cap on the side of the vehicle. There's a small handle or button there; press it, and the cap opens easily. After refueling, don't forget to close it tightly and lock it back. This design prevents accidental opening while driving and also adds anti-theft protection. I think beginners should try it a few times to get familiar with the location, unlike my first time when I wandered around the gas station for ages, wasting time and looking silly. For safety, always make sure the engine is off when refueling. Regularly cleaning off dust can prevent it from getting stuck and make the operation smoother.
Was this review help?
8
5
Share
Expand All
MarcusMarie
10/19/25 4:42am
Mastering the Great Wall G10 requires knowing some interior tricks. The fuel tank release is located on the driver's left side, roughly where the seat meets the door panel. Look for a square-shaped lever or button-like mechanism - a gentle press or pull will unlock it. After unlocking, exit the vehicle to manually open the cover, typically by twisting clockwise or pushing. The system is sealed with pressure equalization, so aggressive handling might damage the gasket - treat it gently. A common mistake is forcing a stuck lever; instead, check for locks or debris blockage. Personally, I recommend confirming the "click" sound after refueling to prevent leaks or hazards. Understanding such designs enhances driving experience - this mechanism proves far more efficient than key operation, ideal for urban commuting. Maintain regular servicing to ensure smooth components for hassle-free refueling.
Was this review help?
14
4
Share
Expand All
LePaul
12/02/25 5:17am
When I first got the SAIC Maxus G10, I was clueless about how to open the fuel tank cap. Later, I discovered a small lever or button on the left side of the driver's seat, near the door where your leg rests. It's quite noticeable, and a gentle operation unlocks it. Then, simply step out and lift the fuel tank cap directly. The process is straightforward—just remember to be gentle to avoid damage. Always turn off the engine for safety when refueling. The key is to locate the lever or button before getting out of the car to save time and hassle. After a few practices, it becomes second nature—efficient and time-saving.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What Are the Causes of Transmission Noise in the Haval F7?

Haval F7 transmission noise can be attributed to the following reasons: Wear and damage of bearings: When bearings wear out, the gap increases, and the fit precision decreases; when bearings are damaged, abnormal sounds occur as they cannot operate normally, potentially leading to damage of transmission components and exacerbating the issue. Wear of transmission components or the use of replacement parts with excessively low precision, such as worn gears or new gears with excessively large fit gaps compared to the original ones. Insufficient or overly viscous lubricant causing poor lubrication: In such cases, the corresponding lubricant (grease) should be replaced; otherwise, it will accelerate transmission wear and shorten its service life. Loose bolts on the transmission housing (end cover): Vibration during use can loosen the bolts, so regular inspections are necessary.
17
5
Share

Where is the fuel filler switch on the Geely Emgrand?

The fuel filler switch on the Geely Emgrand is located as a small lever below the driver's seat with an indicator mark. Pulling it will open the fuel tank cap. The 2019 Geely Emgrand measures 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. In terms of power, the Geely Emgrand is equipped with a 1.5-liter inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or CVT transmission, delivering a maximum power of 80KW and a maximum torque of 140NM. The Geely Emgrand features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
14
2
Share

What to Do If the Steering Wheel Becomes Heavier After Wheel Alignment?

If the steering wheel becomes heavier after a wheel alignment, you should return to the 4S shop and have the staff readjust the wheel alignment data. The front wheels have camber and toe angles. If the steering wheel becomes heavier after the alignment, it may be due to improper adjustment of these angles. The four wheels of a car are not simply perpendicular to the ground; each wheel has specific alignment data. The front wheels have toe and camber angles, while the rear wheels also have camber angles. Driving over speed bumps or rough roads can cause the wheel alignment data to change. If wheel alignment is not performed for a long time, it may lead to uneven tire wear or vehicle deviation.
17
0
Share

What are the business vehicles?

Business vehicles include the Hongqi L5, Mercedes-Benz S-Class, Maybach S-Class, Audi A8, BMW 7 Series, Mercedes-Benz E-Class, Audi A6L, etc. Definition of business vehicles: The full name of MPV is Multi-Purpose Vehicle, which integrates the functions of sedans, station wagons, and vans. Each seat in the vehicle can be adjusted and combined in various ways. Advantages of business vehicles: Spacious interior: 7-seater business vehicles feature large space designs, often with face-to-face conference table setups, allowing business professionals to conduct meetings directly inside the vehicle. High safety standards: 7-seater business vehicles are equipped with comprehensive seat belts, standard safety headrests, and front and rear safety brakes.
3
3
Share

Where does the air conditioning water of the Baojun 730 flow out from?

Baojun 730 air conditioning water flows out from the middle position under the car. The location of the air conditioning drain outlet: The car air conditioning drain hole is generally under the front engine hood, located at the junction of the front windshield and the front fender. In addition, some models have the air conditioning drain holes installed on both sides of the roof. The function of the air conditioning drain outlet: The air conditioning drain outlet functions to discharge the water condensed from the surrounding air during the heat exchange process when the evaporator continuously absorbs heat during air conditioning use. This is why there is a puddle of water under the car after the air conditioner has been running for a while. New car owners may suspect a car water leak when encountering this situation, but there is actually no need to worry at all.
11
5
Share

Does the BMW 3 Series have a double-wishbone suspension?

BMW 3 Series does not feature a double-wishbone suspension but instead uses a MacPherson strut suspension. The presence of the M3 model with its large 4.0-liter engine makes the double-wishbone suspension impractical due to excessive lateral space occupation, which would not accommodate the engine. Trailing arm suspension system: The trailing arm suspension system is specifically designed for rear-wheel suspension systems. European models such as those from Peugeot, Citroën, and Opel often prefer this type of suspension system. Multi-link suspension system: The multi-link suspension system is further divided into a 5-link rear suspension and a 4-link front suspension system. As the name suggests, the 5-link rear suspension system includes five links: the control arm, rear locating arm, upper arm, lower arm, and front locating arm, with the control arm capable of adjusting the front wheel beam.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.