How to open the fuel tank cap of the Malibu XL?

What are the hidden features of the Soueast V3 Lingyue?

The hidden features of the Soueast V3 Lingyue include remote unlocking, trunk switch, and sensitivity adjustment. Below are the specific details of the V3 Lingyue: 1. Dimensions: The V3 Lingyue measures 4405/4420mm in length, 1700mm in width, and 1415mm in height, with a fuel consumption of 5.8L/100km, a wheelbase of 2.5 meters, and a luggage compartment capacity of 420 liters. 2. Powertrain: The V3 Lingyue is equipped with a Mitsubishi Technology 1.5L MIVEC engine, featuring DOHC dual overhead camshafts and a variable valve timing system. 3. Configuration: The V3 Lingyue adopts four-wheel disc brakes, with both front and rear brakes being disc-type, paired with ABS+EBD, 2SRS, power windows for all four doors, and other features.

11

2

Share

Is the XTS Front-Wheel Drive or Rear-Wheel Drive?

XTS is the only front-engine, front-wheel-drive model in the Cadillac lineup. The vehicle's comprehensive intelligent detection system, including lane change assistance, front vehicle distance monitoring, lane departure warning, and various other alerts, is highly effective. The car provides warnings through seat vibrations to indicate changes in vehicles approaching from the left rear and variations in the left-side road conditions. This ensures a strong sense of security while driving. Front-wheel-drive vehicles, with their transversely mounted engines, save cabin space and, due to the absence of a rear-wheel-drive driveshaft, experience less energy loss and relatively higher transmission efficiency. In rear-wheel-drive vehicles, power is transmitted from the engine to the rear wheels via the driveshaft, with the rear wheels responsible for propulsion and the front wheels for steering. The driving experience differs between front-wheel-drive and rear-wheel-drive vehicles. Generally, front-wheel-drive cars feel like they are being "pulled" by the front two wheels, while rear-wheel-drive cars feel like they are being "pushed" by the rear two wheels. During acceleration, as the vehicle's center of gravity shifts from the front to the rear, rear-wheel-drive cars gain better traction and improved handling. In sharp turns, it is relatively easier to recover from a loss of control—simply easing off the throttle can return the car to its original trajectory.

16

5

Share

What is the fuel consumption of the 2021 Excelle four-cylinder model?

2021 Excelle four-cylinder model has a fuel consumption of 5.3L per 100 kilometers. The following are the specific details of the Excelle: 1. Vehicle Positioning: The Buick Excelle is a compact car under the Buick brand. The length, width, and height of the Buick Excelle are 4609mm, 1798mm, and 1464mm respectively, with a wheelbase of 2640mm. 2. Powertrain: The Buick Excelle's 1.3-liter turbocharged engine has a maximum power of 120kW and a maximum torque of 230Nm. The engine's maximum power is achieved at 5500 rpm, and the maximum torque is available between 1800 to 4400 rpm. This engine is equipped with a 48V mild hybrid system and multi-point fuel injection technology, and it uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed automatic transmission. The 1.5-liter turbocharged engine has a maximum power of 113 horsepower and a maximum torque of 141Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is available at 4400 rpm. This engine is equipped with DVVT technology and multi-point fuel injection technology, and it uses an aluminum alloy cylinder head and a cast iron cylinder block. This engine is paired with a 6-speed automatic transmission.

6

4

Share

How to Turn Off the ECO Mode in a Vehicle?

Press the ECO mode button to turn off the ECO mode. Using the ECO mode while driving can save fuel, and you can choose to use it reasonably during driving. After the ECO mode is activated, the vehicle's powertrain will also be affected, so you can flexibly use it as needed. Below are some fuel-saving driving tips: 1. Smooth Driving: Driving smoothly is the most fuel-efficient. Aggressively stepping on the accelerator and brakes consumes the most fuel. During acceleration and driving, try to avoid sudden acceleration. When the vehicle accelerates abruptly, fuel injection increases, leading to higher fuel consumption. Sudden braking also increases fuel consumption. It is recommended to control the speed flexibly and maintain steady driving. 2. Drive at Economical Speed: Generally, the economical speed for small cars is 80-100 km/h. Speeds that are too high or too low will affect fuel consumption. If the speed is too fast, the engine needs to output more power at higher RPM, which also increases fuel consumption. If the vehicle has cruise control, you can use it to maintain speed and achieve fuel savings. 3. Reduce Vehicle Load: Many drivers tend to keep unnecessary items in their cars. Unused items should be cleared out promptly, as extra weight increases the vehicle's mass and raises fuel consumption during driving. Periodically reducing the vehicle's load not only saves fuel but also keeps the interior cleaner and increases cargo space. 4. Reduce Resistance at High Speeds: When driving at high speeds, the vehicle needs to overcome wind resistance. Avoid opening windows on highways, as open windows increase wind resistance, requiring more power and thus higher fuel consumption. Instead, use the air conditioning or sunroof. 5. Timely Maintenance: Vehicle maintenance is also a significant factor affecting fuel consumption. Proper maintenance ensures the engine is well-lubricated, reducing wear and lowering fuel consumption.

6

3

Share

Is the Binyue Engine Made by Volvo?

The Geely Binyue Sport Edition and the standard version both utilize a 1.5T engine co-developed by Geely and Volvo. This engine is a three-cylinder unit. More details about the Geely Binyue are as follows: 1. The Geely Binyue is based on the BMA modular architecture, another masterpiece by Geely. This architecture was jointly developed by Geely and Volvo. Like the GS, the Binyue features Geely's ripple-style front grille, but it also comes with dual 'L'-shaped daytime running lights. Additionally, the front spoiler area of the Binyue is more aggressive, highlighting the car's exceptional sporty performance. 2. The dimensions of the Geely Binyue are 4330/1800/1609mm (length/width/height), with a wheelbase of 2600mm. Thanks to the BMA architecture's high space utilization efficiency, the Binyue naturally offers a spacious interior. By reducing the front engine compartment's layout space while maintaining the same vehicle length, the wheelbase utilization is maximized to 68.7%, creating a comfortable and roomy cabin. 3. For the interior, the Geely Binyue's steering wheel and seats are wrapped in leather. The center console features a floating large LCD screen, with a design that contrasts light and dark tones to emphasize the car's style. The interior primarily uses dark colors, accented with bright decorations, delivering an excellent visual effect. 4. In terms of power, the Geely Binyue is equipped with a 1.5T three-cylinder engine. Notably, this engine was also co-developed by Geely and Volvo. The Binyue is paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 177 and a peak torque of 255N·m.

11

4

Share

How Long After Paying Off the Car Loan Can the Vehicle Be Transferred?

After the car loan is fully paid off, the owner can obtain a loan clearance certificate from the lending bank. Then, with personal valid identification, the vehicle's registration certificate, purchase invoice, and other required documents, the owner can visit the local vehicle management office to complete the release of the mortgage and proceed with the transfer process. In other words, the transfer can be initiated immediately after the loan is paid off, with the time required depending on individual efficiency. Prepare the original and copies of the seller's ID, the buyer's ID, the original vehicle purchase invoice or previous transfer invoice, the vehicle's original registration certificate, the vehicle's driving license, and the used car sales contract. The required procedures for transferring a vehicle after paying off the loan include: 1. Preparing documents: Original and copies of the seller's ID, the buyer's ID, the original vehicle purchase invoice or previous transfer invoice, the vehicle's registration certificate, the vehicle's driving license, and the used car sales contract; 2. Signing the contract: Sign the used car sales contract and check for any traffic violations. If there are violations or if the vehicle inspection is overdue, the transfer may not be possible. Visit a used car trading market or any place that can issue an invoice to obtain a transfer receipt. Then, proceed to the vehicle management office or its branch at the trading market to complete the license plate transfer process; 3. Obtaining vehicle photos: Staff will inspect the vehicle, take rubbings, remove the license plate, and take photos, for which a fee is required. Obtain the vehicle photos and attach them to the inspection record form; 4. Checking for violations: Once approved, submit the relevant documents, the vehicle registration/transfer/cancellation form, and the transfer receipt at the designated counter. Submit the original vehicle documents and license plates, select a new license plate, and receive the new driving license, tax registration certificate, and new license plates.

12

4

Share

How to open the fuel tank cap of the Malibu XL?

What are the hidden features of the Soueast V3 Lingyue?

Is the XTS Front-Wheel Drive or Rear-Wheel Drive?

What is the fuel consumption of the 2021 Excelle four-cylinder model?

How to Turn Off the ECO Mode in a Vehicle?

Is the Binyue Engine Made by Volvo?

How Long After Paying Off the Car Loan Can the Vehicle Be Transferred?

What is the function of the cruise control in the Hongqi HS5?

What to Do When the Car Behind Uses High Beams?

How long does it take to change tires?

Can a Car with Replaced LED Headlights Pass the Annual Inspection?