How to open the fuel tank cap of the Buick GL8?

1 Answers
SanNevaeh
07/29/25 11:38pm
To open the fuel tank cap of the Buick GL8, follow these steps: 1. Enter the cabin and locate the fuel tank cap switch button on the driver's side; 2. Pull the button to release the fuel tank cap; 3. Turn the inner cap counterclockwise and hang it on the hook inside the outer cap. The Buick GL8 is an MPV with body dimensions of 5238mm in length, 1878mm in width, and 1776mm in height, a wheelbase of 3088mm, and a fuel tank capacity of 66 liters. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237 PS, a maximum power of 174 kW, and a maximum torque of 350 Nm.
Was this review help?
9
2
Share
More Forum Discussions

What does China V mean?

China V refers to the level of total vehicle exhaust pollutant emissions, where a higher number indicates a higher level, and correspondingly lower engine emissions. The European Union has been implementing this standard since 2009, imposing stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China I to China IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. Below is additional information: 1. Vehicle emission pollutants include: carbon dioxide, sulfides, nitrogen oxides, chlorofluorocarbons, non-methane total hydrocarbons, etc. These pollutants can damage the ozone layer, cause the greenhouse effect, and form acid rain, but the most direct impact is harm to human health. 2. Internal combustion engines produce emissions as long as they operate, but continuous technological advancements allow for control and reduction through technical means. Emission standards are designed to gradually improve internal combustion engine technology to reduce emissions. Compared to China V, the China VI emission standard requires a 50% reduction in emissions.
2
3
Share

Should a New Tire Be Placed on the Front or Rear Wheel?

There is no fixed rule on whether a new tire should be placed on the front or rear wheel, but it is generally installed on the drive wheels. If the vehicle is front-wheel drive, the new tire should be placed on the front wheel; similarly, for rear-wheel drive vehicles, the new tire should be placed on the rear wheel. For front-wheel drive vehicles, the front wheels serve as both steering and drive wheels. During emergency braking, front-wheel drive vehicles require stronger grip, so the new tire should be placed on the front wheels. For rear-wheel drive vehicles, the rear wheels are prone to skidding, and power is concentrated on the rear wheels. If the rear tires are excessively worn, their grip weakens, so the new tire should be placed on the rear wheels to prevent rollover. If you frequently drive on highways, it is recommended to install the new tire on the rear wheel. High-speed driving often involves sudden evasive maneuvers, and if the rear tires have weak grip, oversteering is likely to occur, increasing the risk of skidding. When a vehicle lacks grip during cornering, it generally exhibits two conditions: Understeer, where the car tends to push outward due to inertia during a turn. In this case, hold the steering wheel firmly and apply gentle braking. Oversteer, where the actual steering angle exceeds the rolling angle of the front wheels, causing the rear wheels to slide outward and resulting in a tailspin. Avoid heavy braking; instead, apply light braking and counter-steer based on the vehicle's position. However, this maneuver is quite challenging for most drivers.
4
2
Share

Why is there frost on the car's interior windows?

The reason for frost forming on the interior windows of a car is: After people leave the car at night, residual heat remains inside the vehicle, causing the temperature of the windows to be higher than the outside. If the external temperature is too low or it's snowing, the moisture inside the car will solidify into ice beads, forming frost on the windows. Here are some methods to remove frost from car windows: 1. When parking after using the car, don't immediately lock and leave. Instead, wait patiently for a while, open both doors to ventilate, and wait until the interior temperature drops to nearly match the outside temperature. Then, turn on the power and use the windshield wipers to clean any remaining snow or water from the front windshield before leaving. 2. Frost on the rear window is easier to handle. Most cars are equipped with a rear window grid-style defroster. The defroster consumes battery power when operating, so always start the engine first before pressing the rear window defogger switch. The defroster will automatically turn off after 10 minutes.
5
3
Share

What does automatic headlight mean?

Automatic headlight refers to the automatic headlamp. Here are the relevant introductions: 1. The function of automatic headlamps: Some manufacturers install light-sensitive control systems on the headlamps for the convenience of drivers. When the light-sensitive control system detects that the external light intensity is greater or less than a certain value, the car headlamps will automatically turn on or off. 2. The use of automatic headlamps: Simply turn the combination light switch to the auto position, and the automatic headlamp function will be activated. When driving at night or entering a tunnel, the headlamps will automatically turn on. 3. Automatic headlamps cannot be adjusted: Automatic headlamps do not adjust between high and low beams. Because automatic headlights only rely on sunlight sensors to determine the brightness of the surrounding environment and cannot analyze changes in the surrounding environment in real time to choose between high and low beams.
7
4
Share

How to resolve the SVS light issue in diesel vehicles?

In this situation, you can try starting the engine. If it fails to start, it might indicate an issue with the fuel pump, which may need replacement. If the engine starts, the problem could lie with other sensors. The vehicle may still be drivable in such cases, but there's a possibility that the fault could affect normal operation. It is advisable to visit a repair shop for inspection as soon as possible. Below are related details: 1. Appearance of the SVS fault light: Vehicles with electronic fuel injection systems are equipped with an electronic control unit (ECU), similar to a human brain. This ECU is pre-programmed with all standard electronic parameter values during manufacturing. If the vehicle's parameters deviate from these standard values during use, the fault light (SVS) will illuminate, alerting the driver to a potential issue. 2. Scope of the SVS fault light: This fault light is a general indicator for all electronic faults, including issues with sensors such as the throttle position sensor, intake pressure sensor, oxygen sensor, coolant temperature sensor, knock sensor, crankshaft position sensor, airbag sensor, and others. 3. Meaning of the SVS light: The SVS light in a vehicle is similar to the engine fault light. When the SVS indicator lights up, it means the engine control unit has detected an erroneous signal from a sensor or that the sensor's readings are outside the standard operating range.
13
2
Share

What does AUTO mean on a car's air conditioning system?

AUTO refers to the automatic air conditioning mode. When the automatic air conditioning is turned on, the system will control the air outlet temperature based on the sensors inside the car (providing warm air in winter and cool air in summer). Additionally, it can adjust the constant temperature inside the car to control the intensity and speed of the air conditioning. Here are some relevant details: 1. Usage of AUTO automatic air conditioning: Normally, there is an "AUTO" button on the central console. Pressing this button will turn it on, and you can then adjust the constant temperature inside the car according to your comfort level. Some car models even support voice control—simply activate your car's voice assistant and instruct it to turn on the automatic air conditioning mode (specific operations should be referred to in the car's user manual). 2. Precautions for using AUTO automatic air conditioning: For automatic transmission cars, the air conditioning should not be used when driving at speeds of 120 kilometers per hour. Similarly, for manual transmission cars, the air conditioning should be turned off at 110 kilometers per hour. This helps reduce the workload on the air conditioning system and prevents shortening its lifespan.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.