How to Open the Fuel Tank Cap of the Avancier?

2 Answers
DiBrynlee
07/28/25 10:30pm
The method to open the fuel tank cap of the Avancier is: Press the fuel tank when the car is unlocked, and it will pop open. The Avancier is the flagship model of the Honda brand under GAC Honda. GAC Honda equips the Avancier with a 2.0T turbocharged engine, which features dual VTC variable valve timing technology and VTEC variable valve lift technology on the exhaust side, delivering a maximum power of 200 kW and a maximum torque of 370 Nm. The Avancier is equipped with a 9-speed automatic transmission, replacing the traditional gear lever with SBW electronic push-button shifting, and offers three driving modes: Snow Mode, Sport Mode, and Comfort Mode.
Was this review help?
2
3
Share
OEmmanuel
08/12/25 3:00am
I picked up the new Crown last year and couldn't find the fuel tank switch at first. Later, I discovered it's actually very simple: with the key on you and the car unlocked, just press the right edge of the fuel tank cover directly. But be careful not to use your nails; instead, press the raised design area with your palm flat, and it will pop open with a gentle push. After refueling, make sure to close it until you hear a click to ensure it's secure. Once, I had to brake suddenly and noticed the fuel tank cover wasn't properly closed, swinging back and forth, which was quite scary. It's important to check that it's tightly closed after refueling. Additionally, the fuel tank cover automatically locks when the car is locked, which is quite reassuring for theft prevention. If the car isn't used for a long time, remember to open the cover regularly to ventilate and prevent the rubber seal from aging.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Should Car Maintenance Be Based on Time or Mileage?

Car maintenance can be based on either time or mileage, whichever comes first. Common car maintenance items include: 1. Replacing engine oil, oil filter, air filter, cabin air filter, fuel filter, transmission fluid, and engine belts; 2. Inspecting spark plugs, tires, and braking systems; 3. Cleaning throttle bodies and fuel injectors; 4. Topping up brake fluid. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle. Its purpose is to maintain a clean appearance, ensure normal technical conditions of the vehicle, eliminate potential hazards to prevent failures, slow down the deterioration process of parts, and extend the service life.
12
0
Share

Where to Add Windshield Washer Fluid for Corolla?

Windshield washer fluid for the Corolla is added in the front engine compartment. Windshield washer fluid, also known as windshield wiper fluid, primarily consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The Corolla is a compact 4-door, 5-seater sedan with body dimensions of 4635 mm in length, 1780 mm in width, and 1455 mm in height, a wheelbase of 2700 mm, and a fuel tank capacity of 50 liters. The Corolla is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85 kW and a maximum torque of 185 Nm, paired with a CVT continuously variable transmission.
9
5
Share

Do You Need to Replace the Wheel Hub When Changing Car Tires?

Replacing tires does not require changing the wheel hub. The functions of tires are: 1. To work with the car suspension to cushion the impact during driving; 2. To ensure good ride comfort and driving smoothness; 3. To ensure good adhesion between the wheels and the road surface; 4. To improve the car's traction, braking, and off-road capability; 5. To bear the weight of the car. Precautions for tire use include: 1. Pay attention to the degree of tread wear; 2. Avoid excessively high or low tire pressure; 3. Remove debris from the tread to prevent punctures that could lead to air leaks or blowouts; 4. Rotate tires regularly to prevent uneven wear.
3
4
Share

What to Do When the Car's Steering System Has a Fault?

The solutions for a faulty car steering system are: 1. Turn the steering wheel left and right to identify the source of the noise and conduct disassembly inspection accordingly; 2. Replace the oil seal and sealing ring with new ones; 3. Visit a corresponding repair shop for maintenance. The causes of a faulty car steering system include: 1. Damage to the kingpin and bushing, or failure of the column thrust bearing; 2. Malfunction of the steering gear or power steering pump; 3. Failure of the sealing ring on the limit valve; 4. Damage to the rear cover sealing ring. The steering system is used to change or maintain the direction of the car's movement, whether forward or backward. Its components include: the steering control mechanism, steering gear, and steering linkage. The steering control mechanism consists of the steering wheel, steering shaft, and steering column.
18
3
Share

Which oil viscosity grade is more suitable for winter use?

In winter, 0W grade engine oil is more suitable. The number before the 'W' in the oil grade represents cold start performance - the smaller the number, the better the oil's low-temperature fluidity. The number after the 'W' indicates the oil's kinematic viscosity - the higher the number, the higher the viscosity. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To cool and lower temperatures; 3. To clean and remove contaminants; 4. To cushion and absorb shocks; 5. To prevent rust and corrosion. Engine oil, also known as motor lubricant, consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance.
12
0
Share

What is the working principle of the Sylphy synchronizer?

The working principle of the Sylphy synchronizer is: During gear shifting, since the speed of the power output gear is faster than that of the gear to be engaged, it solves the mechanical device that addresses the inconsistency between the engine speed and the transmission speed during gear shifting operations. The synchronizer consists of an engaging sleeve and a synchronizing lock ring, and its characteristic is to achieve synchronization through friction. The Sylphy is a compact sedan under Dongfeng Nissan. Taking the 2021 Sylphy as an example, its body structure is a 4-door, 5-seater sedan with body dimensions of: length 4631mm, width 1760mm, height 1503mm, a wheelbase of 2700mm, a minimum ground clearance of 166mm, and a fuel tank capacity of 50 liters.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.