How to Open the Fuel Tank Cap of Roewe?

1 Answers
VanIsabela
07/29/25 3:38pm
The fuel tank cap switch of Roewe is located below the dashboard in the driver's cabin. Pull this switch to open the fuel tank cap. The icon of the fuel tank cap switch is the symbol of a gas station refueling. Turn the fuel filler cap counterclockwise slowly. Before opening the fuel filler cap, release the pressure in the fuel tank.
Was this review help?
13
2
Share
More Forum Discussions

What Are the Essential Items for a Major Maintenance Service?

Replacement of engine oil and three filters, replacement of transmission fluid, replacement of generator and fan belts, replacement of spark plugs, replacement of brake fluid, replacement of power steering fluid, replacement of fuel filter element, inspection and replacement of tires, inspection and cleaning of the throttle body, inspection of antifreeze, inspection and replacement of timing belts, inspection of the chassis, inspection and cleaning of fuel injectors, inspection of the battery. Here is some related content: 1. Vehicle Maintenance: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. The Purpose Is: The purpose of vehicle maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
1
4
Share

Can 5-Year-Old Tires Be Used on Highways?

It is not recommended for highway driving. Under normal circumstances, tires should be replaced every four years, and five years far exceeds this timeframe. Here is additional information: Introduction to tire lifespan: Under normal driving conditions, tires typically last 60,000-80,000 kilometers or 3-5 years. Of course, the service life of tires is greatly influenced by driving habits, road conditions, parking environment, and other factors, so the lifespan of car tires may vary. It is not advisable to judge simply based on mileage or years of use. Causes of accelerated wear: In terms of driving habits, frequent hard braking and rapid acceleration will accelerate tire wear, especially in urban driving where frequent starts and stops are required, potentially necessitating tire replacement before reaching 50,000 kilometers. In contrast, highway driving causes the least wear to tires compared to urban roads.
13
2
Share

What do motor vehicle lanes and non-motor vehicle lanes mean?

Motor vehicle lanes and non-motor vehicle lanes refer to roads designated for motor vehicles such as cars and roads designated for non-motor vehicles such as bicycles, respectively. Motor vehicle lanes: Motor vehicle lanes refer to the lanes on the carriageway of highways or urban roads (the part between the curbs on both sides of the road or the paved surface of the road, exclusively for vehicle passage) from the first vehicle lane division line on the right to the center line (if there is no center line, the geometric center line is used as the reference). Except under special circumstances, these lanes are exclusively for motor vehicle traffic. Non-motor vehicle lanes: Non-motor vehicle lanes refer to the lanes on the carriageway of highways or urban roads from the right sidewalk curb (or line) to the first vehicle lane division line (or isolation belt or pier), or the lanes marked on the sidewalk. Except under special circumstances, these lanes are exclusively for non-motor vehicle traffic.
4
4
Share

Do tires need to be replaced after 4 years and 30,000 kilometers?

Tires need to be replaced after 4 years and 30,000 kilometers, as this duration and mileage mark the replacement threshold for tires. Tire replacement timing: Counting from the production date (marked on the tire sidewall), five years is the aging replacement period. If it exceeds five years, the tires should be replaced even if the tread wear has not reached the limit. Determining tire replacement based on wear level: If considering mileage for tire replacement, it can serve as a reference, but the primary factor is the wear level. Due to factors such as the vehicle's weight, daily light loads, full loads, and tire quality, the degree of tire wear can vary significantly even under the same mileage. If the mileage is hard to remember, a specialized tread depth gauge can be used to measure the wear level.
4
1
Share

How Long Does a Dry Dual-Clutch Transmission Last?

Dry dual-clutch transmissions typically last around 350,000 kilometers. Since dry dual-clutch systems eliminate the need for related hydraulic systems, they offer advantages in terms of manufacturing costs, weight reduction, and space optimization. Additionally, the absence of hydraulic resistance in dry dual-clutch transmissions results in higher transmission efficiency and better fuel economy compared to wet-clutch systems. Usage recommendations: Dual-clutch transmissions are not suitable for frequent starts. Avoid prolonged low-speed driving or stop-and-go traffic, as this can easily lead to overheating and potential malfunctions. If the vehicle's computer issues a warning, immediately stop the vehicle to allow the transmission to cool. When following traffic, try to use lower gears, including manual mode or Sport mode, to significantly reduce excessive clutch heat caused by frequent gear changes by the transmission's shifting mechanism.
11
5
Share

Does an Automatic Transmission Have Idle Speed?

Yes, all motor vehicles have idle speed. Here is some additional information: The meaning of car idle speed: Car idle speed is not a type of speed but rather a working condition. When the engine is running without load, it is called idle speed. When the accelerator pedal is fully released while the engine is running, the engine enters idle speed. The engine speed during idle is referred to as idle speed. Idle speed can be adjusted by modifying the throttle opening size, among other methods. Generally, the optimal idle speed is the lowest RPM at which the engine does not shake. The purpose of idle speed: Avoid useless work—Idle speed overcomes the engine's own operational resistance, maintains the minimum engine speed, and provides convenience for drivers in various driving and temporary parking situations. For example, when waiting at traffic lights or in congested traffic areas, although the time may be short, temporarily turning off the engine can achieve immediate energy-saving and emission-reduction effects.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.