How to Open the Fuel Tank Cap of Mercedes-Benz GLE?

2 Answers
VivienneMarie
07/28/25 9:35pm
The method to open the fuel tank cap of the Mercedes-Benz GLE is as follows: With the vehicle unlocked, firmly press the fuel tank cover to open it. The fuel tank cap is located on the left side of the vehicle and does not have a dedicated button for control. When the car is stationary and the engine is turned off, a light press while unlocked will open it. If the car is locked or in motion, the fuel tank cap is automatically locked. The Mercedes-Benz GLE is a mid-to-large-sized SUV under the Mercedes-Benz brand, featuring a double-wishbone independent front suspension and a multi-link independent rear suspension. In terms of body dimensions, it measures 4941mm in length, 2018mm in width, 1782mm in height, with a wheelbase of 2995mm.
Was this review help?
19
0
Share
Quentin
08/12/25 2:12am
I've driven a Mercedes-Benz GLE for several years, and the fuel filler flap has always been convenient to open. Usually after parking, just press the button near the driver's door—it's located on the lower part of the left-hand door panel—and the flap pops open with a single press. The key fob also has an unlock button; holding it to unlock the doors simultaneously releases the fuel filler flap. In winter, it might freeze, but a gentle pull should do the trick—avoid using excessive force to prevent damage. After refueling, press the flap back until you hear a click to confirm it's securely locked. Once, I encountered an unresponsive button, which turned out to be a blown fuse—fixed in minutes at the dealership. For frequent highway driving, it's advisable to regularly check the seal to prevent dust ingress. The key safety tip is to operate it only when the engine is off—never rush and accidentally drive off while refueling.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Is the Dashboard Sunshade Mat Useful?

Dashboard sunshade mats are useful. With the continuous increase in consumption in China's automotive accessories market, sunshade mats have become a necessary consumer product for car owners, especially during strong sunlight at noon or dim light at night. The installation of sunshade mats is simple; they just need to be placed on the dashboard without any power source, fully utilizing the principle of nature against nature. It is a mat developed by combining special technology with polymer and nano-activated carbon technology. The functions of the dashboard sunshade mat: 1. Prevent sunlight refraction and increase the brightness of the front windshield; 2. Prevent reflections from outside the car and the dashboard from appearing on the front windshield; 3. The bottom layer protects the dashboard surface from damage and reduces the temperature of the dashboard and the car interior; 4. Absorbs ultraviolet rays and strong light, reducing glare and promoting driving safety.
2
3
Share

What does 653t mean in gl8?

gl8's 653t meaning: 6 represents torque greater than or equal to 350 N·m, here it mostly refers to models equipped with a 2.0t engine; 5 represents the use of a 9at transmission; 3 represents the use of econnect3x connectivity technology. The gl8 uses a 2.0-liter turbocharged engine, with a maximum power of 174 kW and a maximum torque of 350 N·m. The gl8 is a mid-to-large-sized MPV under the Buick brand, with body dimensions of 5238 mm in length, 1878 mm in width, 1776 mm in height, and a wheelbase of 3088 mm. The front suspension of the gl8 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension or a torsion beam suspension.
18
2
Share

How to Clean a Diesel Engine Filter?

Cleaning methods for diesel engine filters: 1. For air filters, remove dust every 50 to 100 hours of operation by brushing off surface dust with a soft brush. If the filter has been in use for over 500 hours or is damaged, it should be replaced promptly. 2. For oil-bath air filters, clean the filter element with clean diesel and replace the engine oil every 100 to 200 hours of operation. If the filter element is broken, it must be replaced immediately. 3. For oil filters, clean them using a mixture of engine oil, kerosene, and diesel as cleaning oil. Oil filters should be cleaned every 180 to 200 hours of operation. If any damage is found, replace the filter immediately to prevent impurities from entering the lubrication surface.
5
1
Share

How to Turn Off the Position Lights?

Position light switch is generally located on the light control lever on the left side of the steering wheel. Turn the knob to the OFF position to turn them off. Usually, the switches for position lights, low beams, high beams, and fog lights are all on the left-hand control lever. Position lights are also called clearance lights, which automatically turn on when the car lights are activated. At the rear of the car, there is one red light on each side for small vehicles. They are turned on when it is not completely dark to indicate the width of the car to other drivers and vehicles behind. Position lights are used during dusk driving to help other drivers judge the size and width of the vehicle ahead. When the light switch is turned to the first position, the small lights that illuminate at the front and rear are the position lights. The next position after the position lights is the low beams, and the high beams refer to the main headlights.
18
3
Share

Can You Drive When the Car Transmission Failure Light Comes On?

Whether you can drive when the car transmission failure light comes on depends on the situation: If it's a yellow light, you can continue driving for a short period, but you should maintain low-speed driving and go to a 4S shop or a professional auto repair shop for repairs as soon as possible; If it's a red light, it is recommended to stop immediately, call for assistance, and have the car towed away. Continuing to drive can easily damage the transmission, and in severe cases, it may need to be replaced directly. There are many reasons for car transmission failure, such as the transmission temperature being too high, transmission oil leakage, problems with the transmission control unit, etc. If you frequently shift gears while driving at high speed for a long time, it is also very likely to trigger the failure light alarm. There is also a possibility of an occasional fault code, in which case the car is basically fine.
4
2
Share

What does the car ion mean?

The car ion refers to the negative ion purification function for vehicle air. When this function is activated, the negative ion generator produces and releases a large number of negative ions. Since harmful substances such as dust, particles, and formaldehyde in the air can easily adsorb to these negative ions, they form larger particles and settle down, which are then filtered out by the air filter to achieve the effect of purifying the air inside the car. The air negative ion purification function is generally equipped in high-end models, and vehicles without this function naturally do not have an ion button. For vehicles equipped with the air negative ion purification function but lacking a physical ion button, it is usually integrated into the central control screen. After opening the air conditioning interface on the screen, the ion touch button can be clearly seen.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.