How to Open the Fuel Tank Cap of Mazda 3 Axela?

1 Answers
VonAustin
07/30/25 8:20am
The switch for the Mazda 3 Axela's fuel tank cap is located on the driver's door, marked with a fuel pump icon. Simply press it to open the fuel tank cap. On the dashboard, there is a small arrow next to the fuel gauge. If the arrow points left, the fuel tank cap is on the left side; if it points right, the cap is on the right. Here is an introduction to three common methods of opening a car's fuel tank cap: 1. Mechanical Key Method: This method is less common and typically used in some rugged off-road vehicles. Most family cars do not use a mechanical key to open the fuel tank cap due to its relative complexity. 2. In-Car Switch Method: This is currently the most common way to open the fuel tank door, offering more convenience compared to the key method. The switch's location varies by model—some are on the floor near the driver's seat, others on the left front door panel or the center console, all marked with a fuel pump icon. 3. Press-to-Open Method: The press-to-open method is the most convenient. Simply park the car and refuel directly. However, if refueling while not parked, ensure the central locking is engaged; otherwise, the fuel tank cap can be opened.
Was this review help?
9
3
Share
More Forum Discussions

What is the normal pressure value for car air conditioning?

Under normal operating conditions of the air conditioning system, the low pressure typically ranges between 1.0-2.5 bar, while the high pressure ranges between 15-18 bar. Below are specific details about car air conditioning pressure values: 1. The normal range for car air conditioning pressure detection is generally that the high pressure should not exceed 1.7 MPa or be lower than 1.3 MPa. 2. The normal range for low pressure is generally not lower than 1.15 MPa and not higher than 1.25 MPa. If the low pressure is higher or lower than this normal range, it indicates abnormal expansion valve adjustment. 3. The air conditioning gauge usually has two dials: a blue one for low pressure and a red one for high pressure. If the ambient temperature is higher, the pressure should be slightly higher, and if the ambient temperature is lower, the low pressure should also be appropriately lower.
2
5
Share

Can the annual inspection pass if the brake lights are not working?

If the brake lights are not working, the annual inspection will not pass. Most vehicles have three brake lights: one on each side at the lower part of the rear and an additional high-mounted brake light on the rear windshield. Some vehicles only have two brake lights, meaning they lack the high-mounted brake light. Brake lights are a crucial part of the vehicle's lighting system and are also one of the most prone to failure. The annual vehicle inspection is a mandatory check for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle based on the safety technical requirements for motor vehicle operation. The annual inspection helps to promptly identify and eliminate potential safety hazards, encourages better vehicle maintenance, and reduces the occurrence of traffic accidents.
2
5
Share

What is the method to reset the maintenance light on a Ford Escape?

Ford Escape maintenance light reset method: 1. Close all doors and windows; 2. Turn the ignition switch to position 2; 3. Simultaneously press and hold the accelerator and brake for about 3 seconds, the dashboard will display an interface, and you need to maintain this for 25 seconds; 4. After 25 seconds, the word "Complete" will appear, indicating that the maintenance light has been successfully reset. At this point, you can release the accelerator and brake. The maintenance light is an indicator of the car's maintenance cycle. When the maintenance light comes on, it means the vehicle has reached the mileage for maintenance. Although you can reset the maintenance light yourself, it is best to go to an authorized Ford service center for maintenance. Afterward, professionals will use a car computer diagnostic tool to reset the maintenance light.
7
3
Share

How to reset the maintenance reminder on Volkswagen Lamando?

Method to clear the maintenance reminder on Volkswagen Lamando: With the car turned off, first turn the key to the OFF position. Hold down the (maintenance reset button) with your left hand, and simultaneously turn the key to the ON position with your right hand. Wait a moment, and the wrench icon on the dashboard will disappear. If the wrench icon disappears, it means the maintenance reset was successful. Here are some additional notes: 1. Please do not reset the maintenance display between maintenance cycles to avoid incorrect displays. The maintenance reminder function is only an auxiliary tool; the detailed maintenance intervals should still follow the maintenance regulations. 2. If the car battery is disconnected for a long time, the system may not correctly calculate the next maintenance due date. To check maintenance information, simply hold down the "Reset" button while the ignition is on until the display shows the maintenance message, then release the button.
4
5
Share

What to Do When the Tire Pressure Monitoring Alarm Goes Off?

The methods to handle a tire pressure monitoring alarm are: 1. Display the tire pressure and temperature readings on the dashboard to check for any abnormalities; 2. Inspect the under-inflated tire for any leaks; 3. Verify if the tire pressure monitor is malfunctioning. Reasons for the tire pressure monitor alarm include: 1. A punctured tire; 2. Prolonged driving or failure to replenish tire pressure in time; 3. Faulty tire pressure sensor; 4. Failure to reset the tire pressure module after tire replacement or repair. Ways to eliminate the tire pressure monitoring alarm are: 1. Inflate or deflate the tire to make the pressure light turn off automatically; 2. Press and hold the set button to turn off the tire pressure monitoring light.
15
0
Share

What to Do When the Fuel System is Running Lean?

Solutions for a lean fuel system: A lean fuel condition occurs when the engine's oxygen sensor detects incomplete combustion of gasoline, indicating too much air and too little fuel. It is recommended to immediately find the nearest repair facility for further inspection. Continued driving may result in sluggish acceleration, increased fuel consumption, and in more severe cases, engine stalling. Causes of a lean fuel system include insufficient fuel pressure, faulty oxygen sensor, malfunctioning mass air flow sensor, intake system leaks, or clogged fuel injectors. The fuel system is responsible for fuel filling and transportation, ensuring that fuel reaches the engine smoothly to power it, while also collecting fuel vapors and filtering them before releasing them into the atmosphere. When the engine is running, the ECU detects the conditions for opening the purge valve, which then opens, allowing fuel vapors to be drawn into the intake manifold by vacuum and burned in the engine.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.