How to Open the Fuel Tank Cap of Maxus G10?

1 Answers
ReedAnn
07/30/25 8:53am
The method to open the fuel tank cap of the Maxus G10 is very simple. Just press the fuel tank cap when the vehicle is unlocked, and it will pop out by itself. If the fuel tank cap does not pop out, check whether the fuel tank cap lock on the car's central console is engaged. Relevant information about refueling the car is as follows: 1. When refueling the car, do not wait until the car is completely out of fuel before refueling, as this will accelerate the wear of the car's engine and is not conducive to the normal use of the car. 2. When refueling the car, try to add high-quality fuel. Adding high-quality fuel will not only extend the service life of the engine but also reduce the car's fuel consumption to a certain extent.
Was this review help?
14
4
Share
More Forum Discussions

What brand is Watson?

Watson is a renowned automotive wheel hub brand. The wheel hub is the cylindrical metal component at the center of a car tire that supports the tire. Tires are made of rubber, which is flexible, hence requiring the wheel hub for support. The barrel-shaped device inside the tire that supports it, with its center mounted on the axle, is called the wheel hub. Automotive wheel hubs are a crucial part of vehicle components. With the continuous development of the automotive industry, wheel hub production will also increase alongside vehicle sales. The steady growth in car sales provides vast development opportunities for the wheel hub industry. Additional information about Watson.
20
0
Share

How many points will be deducted for driving on the highway with a license obtained within half a year?

Driving on the highway with a license obtained within half a year requires an accompanying driver and will not result in point deduction. Relevant regulations: Article 75, Paragraph 2: A driver who operates a motor vehicle on a highway during the probationary period must be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle category for more than three years. For drivers of small automatic transmission passenger vehicles for the disabled, they may be accompanied by a driver who holds a driver's license for small automatic transmission passenger vehicles or higher. During the probationary period after adding a new vehicle category, the above restrictions do not apply when driving the original vehicle category. Highway driving precautions: When driving on the highway and missing an exit due to unfamiliarity with the road, never reverse, drive in the opposite direction, or make an emergency stop. The correct approach after missing an exit is to proceed to the next exit, leave the highway, and then return. Avoid causing unnecessary traffic accidents by trying to save time.
3
0
Share

Where is the PCV one-way valve located on the Wuling Rongguang?

The PCV one-way valve on the Wuling Rongguang is generally installed on the valve cover (or nearby) or the connected intake pipe. The automotive PCV valve is a forced ventilation device inside the vehicle's crankcase, composed of components such as the valve body, valve, valve cover, and spring. The crankcase ventilation system is also known as the "PCV system" or exhaust gas recirculation system. The function of the automotive PCV valve is to regulate the amount of oil vapor entering the intake system caused by the crankcase ventilation system. Additionally, in the event of engine backfire, it can immediately cut off ventilation to prevent issues such as crankcase explosions. Effects of a faulty automotive PCV valve on the vehicle: Engine vibration: The engine may shake during operation, with unstable idling, and a large amount of white smoke may emerge from the exhaust pipe. Causes internal crankcase corrosion: A faulty PCV valve can affect the inside of the crankcase, leading to corrosion and accelerated wear, further reducing the engine's lifespan. Poor vehicle acceleration: The engine may become difficult to start and exhibit poor acceleration. Air filter contamination and damage: A damaged PCV valve can also lead to sludge buildup, which is prone to sedimentation and blockage. The blockage increases crankcase pressure, causing oil vapor to flow back into the air filter and ultimately contaminating and damaging it.
12
0
Share

How to Apply for ETC for Motorcycles?

Motorcycles cannot apply for ETC. Where can ETC be installed: For small vehicles such as cars and minivans, the OBU device is installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it is installed in the lower middle part. ETC installation position requirements: the height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating that the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing film of the OBU and stick it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device.
10
3
Share

Where to Find the Production Date of a Car?

The production date of a car can be found under the front windshield, where the VIN code is located. The 10th digit of the VIN code indicates the production date of the car. VIN Code: The VIN code of a car is like a person's ID number. Each VIN code represents a unique vehicle and is commonly referred to as the vehicle identification number or chassis number. Various Information: This 17-digit number typically includes information such as the manufacturing plant, country of origin, vehicle type, and vehicle characteristics. Of course, it also includes the production year of the car. Lower Left Corner of the Windshield: The VIN code appears in many places on a car, with the most common location being the lower left corner of the front windshield. This VIN is identical to the chassis number on the vehicle's nameplate. If they differ, it indicates an issue with the car. Vehicle Identification Number: The vehicle identification number consists of 17 characters. The 10th digit from the left represents the production time, allowing for a more accurate determination of the car's age. It could be a number or a letter, and the represented year varies by country or region. In China, it is composed of A~H, J, K, L, M, N, P, V, W, X, Y, and 1~9, cycling every 30 years.
11
5
Share

Where to Scrap Motor Vehicles in Boxing?

Motor vehicles in Boxing should be scrapped at the FAW Service Station yard, located 4 kilometers north of Boxing County, west side of the road (adjacent to the north of Jiaoyun Group). Obtaining the Vehicle Scrapping Application Form: The vehicle owner needs to go to the local Vehicle Management Office to obtain the vehicle scrapping application form, also known as the "Motor Vehicle Scrapping Form". Fill in all the information about the vehicle truthfully, and bring along the ID card, vehicle registration certificate, driving license, and all other relevant documents related to the vehicle. After filling out the form, submit it to the relevant staff for review. It should be noted that if the process is entrusted to someone else, a power of attorney and the original ID card of the trustee must also be provided. Auto Repair Factory Designated by the Local Vehicle Management Office: After the "Motor Vehicle Scrapping Form" is approved, the vehicle to be scrapped should be sent to a qualified vehicle scrapping facility or an auto repair factory designated by the local Vehicle Management Office, meaning it must be processed by a formal scrapping company. During the vehicle dismantling process, it is necessary to pay attention to whether someone is taking photos of the vehicle for evidence, mainly including photos before, during, and after the dismantling. However, there are usually supervision personnel from the Traffic Management Office present. Finally, the dismantling factory will issue the vehicle scrapping form, stamp it, and then the traffic management personnel will sign it.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.