How to open the fuel tank cap of a Jeep Compass?

How to Remove Odors in a New Car?

Place activated charcoal in the car. Activated charcoal has a strong ability to adsorb toxic gases. When harmful gases in the air come into contact with activated charcoal, they are adsorbed onto it, thereby purifying the air inside the car. Whether it's a new or old car, it is recommended to keep activated charcoal in the vehicle long-term. Regularly use photocatalyst. Photocatalyst is a new odor-removal technology that involves spraying nano-sized photocatalytic semiconductor materials onto the surfaces of interior materials. Under light, it produces a strong catalytic degradation effect, effectively breaking down harmful gases in the car, removing formaldehyde, and providing antibacterial and disinfecting benefits. Use a car air purifier. Car air purifiers are compact and lightweight, allowing them to be placed in corners of the car. They effectively purify the air inside the vehicle and eliminate formaldehyde odors, making them one of the most effective methods for removing odors in cars today. Avoid exposing the interior to direct sunlight. Why does the odor become stronger when exposed to the sun? It turns out that direct sunlight causes the car's interior materials to release more toxic gases, and higher temperatures also cause toxic substances sealed in unseen areas to volatilize. Therefore, it's best to avoid parking the car under direct sunlight whenever possible. Try to park in underground parking lots or shaded areas and apply reflective window film to the car.

16

4

Share

How Long Can You Park on the Highway?

There are no mandatory regulations on how long you can park in the emergency stopping lane on the highway, but vehicles must leave the emergency stopping lane once the accident is resolved or the malfunction is fixed. The emergency stopping lane is designated for emergency use only; vehicles without malfunctions are strictly prohibited from parking in the emergency stopping lane for extended periods, and it cannot be used for passage. Any vehicle driving in the emergency stopping lane is considered a violation. Precautions for parking in the emergency lane are as follows: If you encounter an unavoidable issue such as a malfunction, park the vehicle in the emergency stopping lane, turn on the hazard warning lights, and place a warning sign 150 meters behind the vehicle. During nighttime, rain, fog, or other adverse weather conditions, you should also turn on the side marker lights, tail lights, and rear fog lights. All passengers must move to a safe area. If necessary, promptly call the highway emergency number to request assistance. In case of traffic congestion ahead, parking or queuing in the emergency stopping lane is prohibited. Vehicle repairs are prohibited on highway bridges crossing rivers. If a driver's vehicle malfunctions and requires parking for repairs but fails to immediately turn on the hazard warning lights or move the vehicle to a location that does not obstruct traffic, penalties may apply. If a vehicle becomes immobile due to a malfunction or accident and fails to use lights or set up warning signs as required, the driver may be fined. Below are precautions for driving on the highway: Follow traffic rules: New drivers should pay attention to traffic regulations and display a novice driver sign. Highway speed limits: Check your vehicle before entering the highway. The minimum speed on the highway must not be lower than 60 km/h, and the maximum speed must not exceed 120 km/h. Merge early: When exiting the highway, merge into the outermost lane in advance. Pay attention to roadside signs indicating distances of 1.5 km or 1 km to prepare for merging. Maintain a safe distance: Keeping a safe distance is the most important factor for safe driving. Many inexperienced drivers misjudge distances, follow too closely, and may not brake in time.

17

3

Share

Should You Hand Over the Car Keys When Washing Your Car?

When washing your car at a car wash, it's best for the owner to keep the car keys themselves. The staff at car washes can be quite diverse, with many people coming and going. If the car keys were to get lost, it would indeed be quite troublesome. 1. Keep your keys with you: It's safer to hold onto your keys while at the car wash. Moreover, it's best not to hand over the car keys to others for safety reasons. A car wash typically takes about 20 minutes, during which both the interior and exterior of the car are cleaned. Whether you're familiar with the place or not, it's advisable not to give your car keys to the car wash staff. 2. Common practice: The usual approach is to remove the car key, open all four doors, and not wander too far away. Even during routine maintenance at a 4S shop, don't just hand over the keys to the service technician and walk away. Instead, engage in a conversation with the technician, ask about some basic car knowledge, and build a rapport. This way, they are more likely to service your car as if it were their own.

18

1

Share

How many points are deducted for stalling the car in Subject 2 exam?

Stalling the engine once due to improper operation will result in a 10-point deduction. Other common situations that lead to point deductions include: Vehicle crossing the line, failing to enter the reversing area, stopping midway, not following the prescribed route or sequence, or exceeding the time limit will result in a 100-point deduction. For slope parking: if the right side of the vehicle is more than 30cm from the roadside line after parking, 10 points will be deducted; if more than 50cm, 100 points will be deducted; crossing or touching the line will result in a 100-point deduction; if the front bumper is not aligned with the pole line and the deviation is within 50cm, 10 points will be deducted; if the deviation exceeds 50cm, 100 points will be deducted. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The exam is passed under the following conditions: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.

16

4

Share

What Causes a Car to Start Immediately When Cold but Not When Hot?

The reasons why a car starts immediately when cold but not when hot are: 1. Carbon deposits: At high temperatures, carbon deposits have a strong adsorption effect on gasoline. If there are excessive carbon deposits on the intake valve, throttle valve, or piston, they can adsorb some fuel, leading to an overly lean air-fuel mixture and affecting startup. 2. Coolant temperature sensor: The coolant temperature sensor adjusts the fuel injection pulse width. If it malfunctions and fails to provide the correct temperature signal, it will affect the engine's fuel injection, causing an abnormal air-fuel ratio and making startup difficult. 3. Intake air temperature sensor: Similar to the coolant temperature sensor, the intake air temperature sensor also adjusts the fuel injection quantity. A higher intake air temperature sensor reading results in a richer mixture, while an open circuit or poor grounding can cause an overly lean mixture. Both overly rich and lean mixtures can make starting difficult. 4. Fuel quality issues: After a hot engine shutdown, the engine compartment remains at a high temperature. If the fuel is prone to evaporation, it can form high vapor pressure in the fuel rail. When this pressure exceeds the fuel system's pressure, it creates vapor lock, causing the fuel injector to spray overly lean fuel vapor, making starting difficult. 5. Fuel injector leakage: Due to the high temperature immediately after engine shutdown, leaking fuel can turn into vapor and enter the intake manifold. A hot start under these conditions can result in an overly rich mixture, making starting difficult.

8

3

Share

What does highway toll ETC mean?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC toll collection method: Through dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, combined with software networking technology and bank backend settlement processing, the purpose of vehicles passing through bridge and road toll stations without stopping to pay tolls is achieved. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license should include the page with the most recent annual inspection stamp. Postal credit card application form. This credit card is used to bind the ETC card. After obtaining the credit card, swipe it twice and bring the POS receipt to the designated postal outlet to receive and install the ETC vehicle-mounted device for free, with no additional charges. Applicants must be between 18 and 60 years old. Own a vehicle registered under personal name. Below are precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have a large rearward tilt angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. When using a debit card to bind ETC, insufficient balance will also cause toll deduction failure.

11

0

Share

How to open the fuel tank cap of a Jeep Compass?

How to Remove Odors in a New Car?

How Long Can You Park on the Highway?

Should You Hand Over the Car Keys When Washing Your Car?

How many points are deducted for stalling the car in Subject 2 exam?

What Causes a Car to Start Immediately When Cold but Not When Hot?

What does highway toll ETC mean?

What is the general speed limit on national highways?

What does repairing brake pads mean?

Should the accelerator and brake be operated with one foot or two feet?

Can a Three-Cylinder Engine Be Replaced with a Four-Cylinder Engine?