How to Open the Fuel Tank Cap of a Hyundai Car?

2 Answers
OGia
07/24/25 9:10pm
To open the fuel tank cap of a Hyundai car, follow these steps: Press the button located under the driver's seat. There is a fuel tank icon under the driver's seat; pull it outward to open the fuel tank cap. The automotive fuel tank is the full name of the car's fuel tank. Identifying the fuel filler location is not difficult—there is an arrow indicator on the fuel gauge of the dashboard, and the side the arrow points to is where the fuel filler is located. Passenger car fuel tank caps are divided into inner and outer caps. The inner cap is always a screw-type; turning it to the right tightens the cap, while turning it to the left loosens it. When refueling, the owner only needs to open the outer cap, while the inner cap is opened by the fueling personnel. Hyundai is a car brand under Hyundai Motor Company, with models including the Sonata, Elantra, Santa Fe, and Tucson.
Was this review help?
11
0
Share
SanJoel
08/10/25 2:33pm
I just started driving a Hyundai and found there's a little trick to opening the fuel tank cap. The usual method is to look for a switch inside the car, such as on the inner side of the driver's door or on the center console, where there's a small button or lever marked with a fuel pump icon. After you park and turn off the engine, pull or press that switch, and the fuel tank cap will unlock. Then, walk to the rear of the car, find a push point on the surface of the fuel tank cap, press it gently, and the cap will pop open. For newer smart models, especially those produced after 2018, when you unlock the car with the key, the fuel tank cap automatically unlocks too—no need for a switch, just press the outer side of the cap directly. However, note that there might be slight differences between models, so it's best to check the owner's manual to confirm the exact location. If there's no response, it might be due to a blown fuse or a faulty switch—don't force it open to avoid damaging the cap, and consider visiting a 4S shop for repairs. Always ensure the car is turned off and the key is removed when refueling—safety first. I once saw a friend who didn't know this and struggled to pull it open forcefully, breaking the cable and spending extra on repairs—totally not worth it. Regularly check if the switch is clogged with dust to extend its lifespan.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Should You Brake When Driving Over Speed Bumps?

You should brake when driving over speed bumps. Speed bumps, also known as speed humps, are traffic safety installations on roads designed to reduce the speed of motor vehicles and non-motor vehicles. The correct way to drive over speed bumps is to slow down before reaching them and then pass over them slowly with both wheels perpendicular to the bump. This allows both wheels to contract simultaneously, with the force from the ground being evenly distributed between the springs and shock absorbers of both wheels, minimizing damage to the vehicle. Precautions when driving over speed bumps include: 1. Avoid having only one tire go over the bump, as this can easily cause misalignment on one side of the chassis suspension; 2. Avoid driving diagonally over the bump, as this can lead to uneven force distribution when the vehicle body contacts the ground, potentially damaging the springs and tires.
3
2
Share

What transmission does the Volkswagen CC use?

Volkswagen CC transmission type is a 6-speed dual-clutch transmission. Overview of automotive transmissions: A transmission is a device that changes the speed ratio and direction of motion, typically located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. Classification of transmissions: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT, with AT achieving automatic shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size, while DCT features two clutches.
13
5
Share

Can an AGM battery be replaced with an EFB battery?

An AGM battery can be replaced with an EFB battery. Here is more relevant information: 1. Reasons: (1) EFB batteries are excellent batteries, and they are more heat-resistant than AGM batteries. (2) Theoretically, EFB batteries have a shorter lifespan than AGM batteries, but AGM batteries are not heat-resistant. Prolonged exposure to high temperatures can reduce the lifespan of AGM batteries. (3) Most car batteries are installed in the engine compartment, where temperatures are relatively high. Therefore, replacing an AGM battery in the engine compartment with an EFB battery is a feasible solution. 2. Differences between them: (1) Different materials: AGM batteries use fiberglass mat, while EFB batteries use lead-acid. (2) Different vehicle applications: AGM batteries are typically used in European and American cars, while EFB batteries are used in Japanese cars.
8
0
Share

Is it necessary to repair peeling paint on rims?

Peeling paint on rims should be repaired. The repair methods and impacts of peeling paint on rims are as follows: Repair methods for peeling paint on rims: Peeling paint on rims can be addressed with spray painting, which can be done at a spray paint shop and is relatively inexpensive. For those with higher requirements for their vehicles, rim repair can be performed at a nearby car beauty shop or repair shop. Impact of peeling paint on rims: Rim scratches are generally categorized into surface scratches and rim edge scratches. After scratching and peeling paint, the rim loses its protective layer. Prolonged exposure in this condition can lead to oxidation and corrosion of the rim surface. If the damage reaches the aluminum alloy core of the rim, the rim will be rendered unusable. In particular, corrosion caused by unrepaired edge scratches can result in poor sealing between the rim and tire, leading to air leakage and compromising safety.
1
2
Share

Where to Add Windshield Washer Fluid for Geely Binyue?

Geely Binyue's windshield washer fluid is added to the filling port on the left side of the engine compartment. Windshield washer fluid, also known as windshield cleaning fluid, mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The Geely Binyue is a compact SUV. Taking the Binyue 2020 Manual Arrow model as an example, its body dimensions are: length 4330 mm, width 1800 mm, height 1609 mm, with a wheelbase of 2600 mm and a curb weight of 1310 kg. The Binyue 2020 Manual Arrow is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 104 kW at 5200 rpm and a maximum torque of 235 N·m between 1600 to 4000 rpm.
11
4
Share

Is It Necessary to Change the Engine Oil When Replacing the Oil Filter?

Replacing the oil filter requires changing the engine oil. The steps for replacing the oil filter are as follows: 1. After turning off and cooling the vehicle, open the engine hood and unscrew the engine oil filler cap; 2. Lift the vehicle and unscrew the oil drain plug on the engine oil pan; 3. Use an oil bucket to collect the waste oil, wait for it to drain completely, let it sit for ten minutes, and then tighten the drain plug; 4. Lower the vehicle, remove the oil filter using tools, and replace it with a new one. The replacement interval for the oil filter varies depending on the type of oil: 1. For mineral oil, the replacement interval is 3,000 to 4,000 kilometers or six months; 2. For semi-synthetic oil, the replacement interval is 5,000 to 6,000 kilometers or six months; 3. For full synthetic oil, the replacement interval is 8,000 to 10,000 kilometers or eight months.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.