···
Log in / Register

How to Open the Fuel Tank Cap of a Chevrolet Cruze?

3 Answers
KaiMarie
08/31/25 3:00am
To open the fuel tank cap of a Chevrolet Cruze, simply pull up the fuel tank cap switch located below the left side of the driver's seat. The function of the fuel tank is to store the working fluid required by the hydraulic system, as well as to dissipate heat, precipitate impurities, and separate air bubbles from the liquid. Taking the 2018 Chevrolet Cruze as an example, it belongs to the compact car category, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. The 2018 Chevrolet Cruze features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 114ps, a maximum power of 84kw, and a maximum torque of 146nm, paired with a 6-speed manual transmission.
Was this review help?
13
3
Share
IslaDella
09/12/25 6:26am
That day, I drove my Chevrolet Cruze to the gas station and spent ages circling the car looking for the fuel tank button, sweating from anxiety. Later, I found out this car has a rather unique design—you actually have to sit in the driver's seat first. There's a small black lever with a fuel tank symbol hidden near the door, under the dashboard on the driver's left side. Gently pull it upward, and you'll hear a 'click' unlocking sound. Then, get out and press the right side of the fuel tank cap—it pops open on its own. Don't be like me, foolishly trying to pry it open by force; you might break the clips. If the lever doesn't respond, check if the door locks are disengaged—the Cruze's fuel tank cap is linked to the central door locking system.
Was this review help?
5
5
Share
Expand All
NolanRose
10/26/25 7:16am
After buying this used Cruze, I discovered its fuel filler cap is way more fun than my friend's German car! The fuel inlet is hidden above the left rear wheel, operated by a clever mechanism in the cabin. Don't rush out after sitting down—just feel along the door frame with your left hand to find the plastic pull ring. Last time my bestie rode with me, she asked: 'Hey, is the fuel cap voice-activated?' which made me laugh out loud. But be careful: if you try to open it right after turning off the engine, it might not work—the central locking system secures all caps during engine warm-up. Though this mechanical release seems tedious, it's incredibly durable; my decade-old car has never had issues with it.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Is it necessary to drive the motorcycle for the transfer of vehicle registration?

It is not necessary to drive the motorcycle for the transfer of vehicle registration. For specific details, you can consult the local vehicle management office, as regulations may vary slightly in different regions. Vehicle Transfer: Vehicle transfer is divided into local transfer and out-of-town transfer. Local transfer is relatively simple, with no strict displacement or environmental requirements. You only need to prepare the required materials and follow the normal transfer process. However, for out-of-town transfer, you need to go to the vehicle management office in the registration area to obtain a transfer certificate; otherwise, you cannot complete the registration. Vehicle Inspection: When applying for motorcycle transfer at the vehicle management office, the office will verify and inspect the vehicle for compliance. After that, you need to submit the inspection certificate at a designated location, surrender the vehicle license plate and registration certificate, and pay the second-hand vehicle transaction tax. Once the fees are paid, you can replace the license plate, sign the transfer details on the registration book, and receive a new registration certificate and inspection compliance standard.
5
4
Share

Do Motorcycles Need Rain Covers?

Motorcycles need rain covers. Design of Rain Covers: The outer layer is made of high-reflectivity aluminum-coated film, which reflects sunlight radiation, preventing the vehicle from overheating even after prolonged exposure. The inner layer consists of soft non-woven fabric to protect the vehicle's paint. This composite material is resistant to folding, waterproof, easy to wash, and quick to dry. The design is stylish with smooth lines, featuring specialized hooks that attach to the chassis to withstand wind. The frame uses memory steel wire, allowing for multiple folds. Introduction to Rain Covers: Rain covers help maintain the vehicle's temperature within the most comfortable range for humans while also protecting the interior from UV, infrared, and other harmful light sources. Their functions include being eco-friendly, waterproof, sandproof, dustproof, frostproof, insulating, cooling, providing privacy, resisting UV rays, and reducing the volatilization of harmful substances inside the vehicle.
8
3
Share

How Long is the Break-in Period for a Manual Transmission?

The break-in period for a manual transmission is 1,000 to 1,500 kilometers. Break-in period precautions: Warm up the engine before starting; it's best to wait until the coolant temperature reaches above 40 degrees Celsius before moving off. When starting, gently press and slowly release the clutch and accelerator pedal, and choose smooth road surfaces for driving. During the break-in phase, smooth driving benefits all moving components—avoid sudden acceleration and especially sudden braking, as emergency stops and inappropriate speed increases can damage vehicle components. Post break-in maintenance: Remove the speed limiter to allow the engine to operate without mechanical restrictions; clean the lubrication system of the car's engine, transmission, transfer case, differential, steering knuckle, wheel hubs, and other areas; replace the lubricating oil, using standard new oil to lubricate all lubrication points throughout the vehicle; inspect the electrical system, and clean carbon deposits and oil stains from the ignition components.
13
4
Share

Can a new car with over 1,000 kilometers driven undergo its first maintenance?

New car with over 1,000 kilometers driven can undergo its first maintenance. Maintenance cycle: 4S shops will determine the vehicle maintenance cycle based on the actual local driving conditions, which may differ from the maintenance cycle recommended in the official manual for certain parts. Maintenance precautions: If the local environment is harsh and road conditions are poor, the maintenance cycle should be appropriately shortened, especially for the air filter element and cabin air filter element. Additionally, the quality and specifications of various fluids must not be mistaken; choose fluids with appropriate specifications and better quality. The replacement of brake pads, wiper blades, batteries, tires, etc., depends on wear and tear, so regular inspections are necessary.
5
3
Share

Where is the engine oil drain plug located?

The engine oil drain plug is located on the oil pan. This design facilitates complete oil drainage and cleaning of the oil pan. Composition of engine oil: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance. Functions of engine oil: The primary functions of engine oil are lubrication, cleaning, and heat dissipation. While oil is used in many parts of a vehicle, the oil that needs to be changed every 5,000 kilometers refers specifically to engine oil. Most people typically use semi-synthetic or fully synthetic oils, with conventional oil being less commonly used. Conventional oil is generally employed in agricultural machinery, three-wheeled vehicles, and motorcycles.
15
4
Share

Is it necessary to replace ATE brake fluid?

It is necessary to replace ATE brake fluid. Advantages of ATE brake fluid: ATE Super Racing brake fluid not only far exceeds other brands in terms of dry and wet boiling points and other indicators, but also has excellent thermal fade control, greatly improving the stability performance for multiple intense braking in racing conditions. Its durability far surpasses the six-month replacement cycle of DOT5 or 5.1 grade fluids, offering a replacement interval of up to three years. Additionally, it has no side effects of corroding plastic brake lines, making it the best match for modified multi-piston brake systems. Performance of ATE brake fluid: Quickly transmits force from the master cylinder to the wheel cylinders. High boiling point (braking generates high temperatures). Stable viscosity, unaffected by temperature. Excellent lubricity, reducing friction between cylinders and seals due to lubrication.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.