···
Log in / Register

How to open the fuel tank cap of a BMW 5 Series?

4 Answers
LeEvangeline
07/29/25 4:37pm

The method to open the fuel tank cap of a BMW 5 Series is: 1. Press the fuel tank cap switch on the driver's door; 2. Press the fuel tank cap located above the left wheel on the body. Taking the 2021 BMW 530Li Leading Edition as an example, its body dimensions are: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68 liters, and curb weight 1710kg. The 2021 BMW 530Li Leading Edition is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 252PS, maximum power of 185kW, and maximum torque of 350Nm.

Was this review help?
4
0
Share
MacFelix
08/14/25 5:56am

Every time I drive my BMW 5 Series to refuel, I find the method to unlock the fuel tank cap is very simple. After sitting in the driver's seat, first locate a small lever or button with a fuel pump icon under the dashboard near the left leg, then gently pull or press it to hear a slight unlocking sound. At this point, the fuel tank cap outside the car has loosened. Simply walk to the right side of the car, press the cap, and it will pop open. After refueling, press it again to close. BMW's design is very thoughtful—the fuel tank cap automatically locks to prevent fuel leakage and is secured by the central locking system to ensure safety. The key point is that the car doors must be unlocked to operate this lever; otherwise, the cap won’t pop open. So, I always remember to press the key unlock button or enter the car and open the door first. This system is highly reliable in daily use, reducing the hassle of manual unlocking.

Was this review help?
10
1
Share
Expand All
LincolnAnn
10/13/25 2:05am

As a 5 Series owner for several years, I'm quite familiar with the fuel filler flap operation. After entering the car, the first thing is to look down near your left foot - there's a plastic lever with a fuel tank symbol. A gentle pull will unlock the fuel filler neck. Then exit the vehicle and press the fuel door at its location to open the flap. After refueling, simply push it back - it will click into place automatically. I remember once being in a hurry to refuel and couldn't pull the lever no matter how hard I tried, only to realize later that the central locking system was still engaged. Now I always press the unlock button after entering. BMW's anti-theft design is effective, but be careful not to force the lever to avoid damaging components.

Was this review help?
6
0
Share
Expand All
JadeMarie
11/26/25 3:05am

When working on cars, I've handled quite a few BMW 5 Series models. Their fuel filler cap operation is mostly standardized: locate the small lever marked with a fuel pump icon near the left footwell on the driver's side, pull it to unlock – no key needed to open the cap. Press the exterior to open it. The key point is this system links to the door locks; when doors are locked, the cap also secures to prevent accidents. Modern models like the G30 even support button operation for added convenience. Occasional jamming might occur due to dust accumulation in wiring or spring fatigue – manually pressing a few times or checking for loose connectors usually restores function.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

How Long Does a Car Have to Stay in Inventory to Be Considered an Inventory Car?

Generally, if a car has been in inventory for more than three months or half a year, it can be considered an inventory car. For imported vehicles, due to factors such as transportation cycles, those that are six months or more from the manufacturing date can also be classified as inventory cars. However, there is no clear definition for inventory cars, and there are no relevant national regulations specifying this term. Below is some related information: 1. Potential issues with inventory cars: (1) After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to moisture damage and aging; (2) Exposure to direct sunlight, wind, and rain may cause exterior damage; (3) For cars stored for too long, if there is no proper warehouse management, the aging of electronic components and rubber products may be hard to detect, and issues like lack of oil or power may arise. 2. What kind of inventory cars are worth buying: (1) The discount must be significant enough, as no one can guarantee whether the purchased car will have quality issues in the future. Therefore, consumers should receive a substantial price discount while taking on the risk; (2) Only inventory cars in good condition are recommended for purchase. Although manufacturers do not completely neglect inventory cars and usually provide some level of maintenance, it is still difficult to ensure that internal plastic components do not age. Avoid buying inventory cars in poor condition. 3. How much cheaper are inventory cars: Generally, cars stored for about a year may be 10%-30% cheaper than new cars, though this is not a strict standard.
8
1
Share

What is BMW M Power?

M Power is not a single car model, but a series of high-performance vehicles under BMW. The M Power series from BMW includes models such as the M3, M2, M4, M5, M6, and M8. These M series models compete with Mercedes-Benz's AMG series and Audi's RS series. Here are the details about the BMW M3: 1. Dimensions: The BMW M3 is a high-performance mid-size sedan based on the 3 Series. It has a wheelbase of 2812 mm, with length, width, and height measuring 4678 mm, 1877 mm, and 1442 mm, respectively. 2. Powertrain: The M3 is equipped with a 3.0-liter inline six-cylinder twin-turbocharged engine. This engine delivers 431 horsepower and a maximum torque of 550 Nm. The engine's maximum power is achieved between 5500 and 7300 rpm, while the maximum torque is available from 1850 to 5500 rpm. It features direct fuel injection and an aluminum cylinder head and block. The engine is paired with a 7-speed dual-clutch transmission, which offers fast gear shifts and high transmission efficiency. 3. Suspension: The BMW M3 uses a double-joint independent suspension at the front and a multi-link independent suspension at the rear. The double-joint suspension enhances both the car's handling and steering precision. The multi-link suspension improves wheel grip, which in turn significantly boosts the car's handling performance. The M3 is exclusively rear-wheel drive, with no all-wheel-drive version available.
17
5
Share

What Are the Causes of Low Oil Pressure in Diesel Engines?

Low oil pressure in diesel engines may be caused by insufficient oil volume, excessively high engine temperature, malfunction of the oil bypass valve, or a clogged oil filter. Low oil pressure can lead to severe engine wear and significantly reduce its service life. Below is a detailed explanation: 1. Insufficient oil volume: If the oil volume is insufficient, the oil pump's pumping capacity will decrease, or it may fail to pump oil due to air ingress, resulting in reduced oil pressure. This can cause increased wear on the crankshaft and bearings, as well as the cylinder liners and pistons due to inadequate lubrication. 2. Excessively high engine temperature: Factors such as excessive scale in the engine cooling system, poor heat dissipation, prolonged overloading, or delayed fuel injection timing can cause the engine to overheat. This accelerates the aging, degradation, and thinning of the oil, leading to leakage through various clearances and a drop in pressure. 3. Malfunction of the oil bypass valve: The oil bypass valve is designed to maintain normal oil pressure in the main oil passage. If its pressure-regulating spring weakens or is improperly adjusted, or if the sealing surface between the valve seat and the steel ball wears out or gets stuck, the oil pressure will decrease. 4. Clogged oil filter: When the oil filter is clogged and unable to allow oil flow, the bypass valve located at its base opens, allowing oil to bypass the filter and enter the main oil passage directly. If the opening pressure of the bypass valve is set too high, it may not open promptly when the oil filter is clogged, causing the oil pump pressure to rise, increasing internal leakage, and subsequently reducing oil pressure.
4
3
Share

Why was the BJ80 discontinued?

BJ80 was discontinued due to poor sales. Here are the detailed specifications of the BJ80: 1. Powertrain: The BJ80 offers a 2.3T gasoline turbocharged engine and a 2.8T diesel turbocharged engine. The gasoline engine delivers a maximum power of 250 horsepower and a peak torque of 350 N·m, while the diesel engine provides a maximum power of 163 horsepower and a peak torque of 340 N·m. The transmission system is paired with a 6-speed manual or a 6-speed automatic transmission from Aisin. 2. Chassis: The BJ80 features a body-on-frame structure, equipped with a traditional part-time four-wheel-drive system, double-wishbone front independent suspension, five-link rear non-independent suspension, and a rear axle mechanical differential lock to enhance off-road capability.
1
2
Share

What to Do If the Motorcycle Registration Certificate Is Lost?

If the motorcycle registration certificate is lost, you can apply for a replacement at the vehicle management office of the registration location. According to Article 43 of the "Motor Vehicle Registration Regulations": If the motor vehicle registration certificate is lost, missing, or damaged, the owner of the motor vehicle shall apply for a replacement at the vehicle management office of the registration location. When applying, the owner of the motor vehicle shall submit proof of identity. Additional information: Introduction to the vehicle registration certificate: The "Motor Vehicle Registration Certificate" is a necessary property ownership document for the vehicle, kept by the vehicle owner and not carried with the vehicle. It is required to be presented for any vehicle registration procedures such as transfer or change of ownership, and records the relevant details of the vehicle, equivalent to the vehicle's household registration book.
4
3
Share

How to Adjust the Clutch Cable of a Jetta?

To adjust the Jetta clutch, first loosen the fixing bolt, then adjust the adjusting screw to the appropriate position. Taking the Jetta VS5 as an example, the following is an introduction to the Jetta VS5: Vehicle Positioning: The Jetta VS5 is a compact SUV. Power: The entire series is equipped with a 1.4-liter turbocharged engine from the Volkswagen EA211 series, delivering 150 horsepower and a maximum torque of 250 Nm. It can output maximum power at 5000 to 6000 rpm and maximum torque at 1750 to 3000 rpm. It is paired with either a 5-speed manual transmission or a 6-speed automatic manual transmission. Suspension: The Jetta VS5 uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The independent suspension improves the wheel's ground contact performance.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.