How to Open the Fuel Filler Cap of the Tiguan L?

What is the fuel tank capacity of the 2016 Jetta?

The fuel tank capacity of the 2016 Jetta is 55 liters. It is a compact car under the FAW-Volkswagen brand. Among cars in the same class, the Nissan Sylphy has a fuel tank capacity of 50 liters, while the Volkswagen Santana has a capacity of 52.8 liters. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, and when it is near 'F', it means the fuel level is sufficient. Maintenance tips for the fuel tank are as follows: Drain accumulated water and sediment from the tank, and check for any fuel leaks at the pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, ensure that the ventilation holes are clear. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel from spilling out while driving.

8

4

Share

What does the wrench symbol on the Volkswagen Magotan dashboard mean?

The wrench symbol displayed on the vehicle dashboard is a reminder that the vehicle requires maintenance. This indicator is the maintenance reminder light. After the vehicle maintenance is completed, resetting the maintenance mileage program will eliminate it. It does not indicate a vehicle malfunction, so there is no need to worry excessively. Function of the maintenance reminder light: The vehicle's maintenance cycle is preset by the manufacturer in the onboard computer when the vehicle leaves the factory. When the vehicle's mileage reaches the maintenance cycle mileage, the "wrench symbol" on the dashboard will illuminate to promptly remind the driver to perform maintenance on the vehicle. Typically, the preset maintenance cycle mileage is between 5,000 kilometers and 8,000 kilometers. Regular vehicle maintenance: Regular maintenance keeps the vehicle in good working condition, while neglecting it can cause unnecessary damage and compromise driving safety. Generally, vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. There is a saying in the automotive industry: "Three parts driving, seven parts maintenance," highlighting the importance of regular vehicle maintenance.

1

4

Share

Where is the drainage outlet of the Jetour X90 door?

The drainage outlet of the Jetour X90 door is located on the rubber strip at the bottom of the door. Daily inspection and unclogging of drainage holes: During daily use, you can clean the obvious leaves and debris near the drainage holes inside the car. However, fine silt or debris may be hidden in the hoses or pipes. In addition to visually inspecting the drainage holes, it is also necessary to check the drainage pipes. The drainage holes in the sunroof and engine compartment are the most prone to clogging, so inspections of these two areas will be a priority. The most effective way to check drainage is to pour clean water into the drainage holes and observe the speed and condition of the drainage. Precautions for unclogging drainage: When the vehicle's drainage is not smooth, it is necessary to determine which drainage hole or pipe is causing the problem based on the location of the accumulated water. After identifying the drainage hole, clean the debris near the drainage outlet. When cleaning the sunroof or other hidden hoses inside the car, avoid using hard objects such as iron wires to unclog them, as these hard objects may cause the hoses to break or detach.

18

3

Share

How to set the equalizer for Highlander?

Highlander can adjust the equalizer frequency volume values by sliding left and right or adding left and right to reduce them. The Highlander audio system features a nine-band adjustment, allowing for the adjustment of treble, midrange, and bass, with modes including pop, classical, punk, etc. Highlander is a vehicle launched by GAC Toyota, with body dimensions of 4890mm in length, 1925mm in width, and 1720mm in height. In terms of power, the Highlander is equipped with a 2.0-liter turbocharged four-cylinder engine across the entire lineup, delivering a maximum horsepower of 220, a maximum power of 162 kW, and a maximum torque of 350 Nm. The transmission is matched with a 6-speed automatic manual transmission.

12

5

Share

Is Manual Transmission Fluid Lifetime-Free?

No, it should generally be replaced every 3 years or 6 years. The primary function of transmission fluid is to maintain the cleanliness of the gear system and to lubricate the transmission components, thereby extending their service life. Below is relevant information about automotive transmissions: 1. Due to different transmission designs, they are categorized into manual transmissions and automatic transmissions (further divided into CVT, AMT, etc.). Each transmission design has distinct technical requirements. Even the same model of transmission configured in different vehicle models will vary in torque, weight, rotational speed, and structure. 2. Therefore, original manufacturers specify their own dedicated transmission fluids. Manual transmission fluid is commonly referred to as gear oil. Based on its quality level, the American Petroleum Institute classifies automotive gear oils into five grades (GL-1 to GL-5). GL-1 to GL-3 have lower performance requirements and are used for lubricating general-load spur and helical gears, as well as gears in transmissions and steering systems. 3. GL-4 is used for lubrication under conditions of high-speed low-torque and low-speed high-torque, such as in automotive hypoid gear drive shafts and manual transmissions. GL-5 offers the highest performance level and is used for lubricating hypoid gear drive shafts and manual transmissions under severe operating conditions with high shock loads.

14

5

Share

When making a U-turn at a crosswalk, should the entire car or just the front pass?

When making a U-turn at a crosswalk, the entire car must pass the crosswalk. Below are specific instructions for making a U-turn with a car: 1. Situations where U-turns are not allowed: Motor vehicles are not permitted to make U-turns at locations with no U-turn signs or no left-turn signs and markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other hazardous sections where accidents are likely to occur. 2. Situations where U-turns are allowed: Motor vehicles can make U-turns at locations without no U-turn signs or no left-turn signs and markings, but they must not obstruct the normal passage of other vehicles and pedestrians.

20

4

Share

How to Open the Fuel Filler Cap of the Tiguan L?

What is the fuel tank capacity of the 2016 Jetta?

What does the wrench symbol on the Volkswagen Magotan dashboard mean?

Where is the drainage outlet of the Jetour X90 door?

How to set the equalizer for Highlander?

Is Manual Transmission Fluid Lifetime-Free?

When making a U-turn at a crosswalk, should the entire car or just the front pass?

Must the Driver Personally Handle Running a Red Light?

Is Installing a Decorative Spoiler on a Car Illegal?

How to Start a Car with the Remote Control?

What are the symptoms of a faulty boost pressure sensor?