How to Open the Front Hood of Volkswagen Lavida?

2 Answers
BradyRose
07/23/25 8:14pm
Lavida's hood release switch is located on the left side of the foot pedal. Press the switch button to open the hood. Below is relevant information about the hood: 1. An Important Component: The hood is an accessory that protects the engine and surrounding pipelines. Everything under the hood, including the engine, electrical circuits, oil lines, braking system, and transmission system, is a crucial part of the vehicle and is vital to the car. 2. Acts as a Protective Cover: It prevents accidents. The engine operates in a high-temperature, high-pressure, and flammable environment, posing risks of explosions, fires, or leaks due to overheating or accidental damage to original parts. The hood effectively blocks damage caused by explosions and serves as a protective cover. It also prevents air from fueling flames, reducing the risk and extent of fire damage. 3. Enhances Aesthetics: The vehicle's exterior design is a direct reflection of its value. As a significant part of the overall appearance, the hood plays a critical role—not only is it visually pleasing, but it also embodies the concept of the entire car.
Was this review help?
12
3
Share
AshlynLee
08/10/25 6:15pm
Opening the hood of my Volkswagen Lavida has become second nature to me, after driving and maintaining cars for over a decade. First, I sit in the driver's seat and locate a small lever near the throttle pedal on the lower left side of the steering wheel. Give it a firm pull, and you'll hear a 'click' from the front, indicating it's released. Then, step out and walk to the front of the car, crouch down, and feel for a small plastic latch just below the center of the grille. Lift or flip it upwards, and the hood will pop open slightly. Next, support it with your hand and lift it to a safe height, making sure the support rod is securely in place. The first time I tried, I didn't pull hard enough, but later I found that regularly lubricating the lever with oil prevents it from sticking. It's convenient for checking engine oil or coolant, but remember to turn off the engine to avoid burns. Always follow the steps in order—beginners often forget the front latch and risk injury by forcing the hood open.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What to do if the wheel hub is severely scratched?

The treatment methods for severely scratched wheel hubs are as follows: 1. First, clean the wheel hub: Thoroughly clean the wheel hub (I removed the wheel hub for easier handling, but it's also fine to leave it on). After cleaning, dry it with a towel, making sure to wipe off any grease on the surface, as this can affect the painting later! Removing the wheel hub also allows you to clean off the considerable amount of metal shavings and stone debris on the wheel. 2. Smooth the scratched area of the wheel hub: Since the scratched areas are rough, they must be smoothed with sandpaper, using 150# sandpaper for this step. After smoothing (check by hand to ensure it's even), apply putty (wheel hub filler) evenly to the scratched area (ensure the grooves are filled), and wait for the putty to dry! Then continue smoothing with 320# and 800# sandpaper, making sure it's very smooth. 3. Apply paint and clear coat: After the above steps are completed, you can proceed to paint. Before spraying, cover the tire and any parts that don't need painting. Then spray evenly (note: spray in multiple thin layers, waiting for each layer to dry before applying the next, to avoid runs or sagging. After the wheel hub paint dries, finally apply a clear gloss coat.
13
1
Share

What do the icons in the car represent?

Icons inside the car are categorized by function, including indicators, warning lights, and fault icons. A red fault light indicates the severity of a car problem, which is critically related to driving. If warning lights such as the handbrake warning light, seatbelt warning light, engine temperature warning light, brake system warning light, or engine oil level warning light illuminate, it means the car has a fault and should not be driven further. Commonly seen and frequently used icons include door alerts, handbrake alerts, seatbelt alerts, and engine self-checks. Common indicators and warning symbols on the dashboard are as follows: 1. The engine oil warning light is symbolized by an oil can. If this warning light appears, it indicates insufficient oil pressure to meet the engine's lubrication needs, so immediate inspection and repair are required. 2. The coolant temperature warning light is symbolized by a thermometer. When this light illuminates, it means the engine coolant temperature is too high. You should immediately stop and turn off the engine, waiting until it cools down to normal temperature before continuing to drive. 3. The ABS indicator light turns on when the ignition is activated and should go off after about 3-4 seconds, indicating the system is functioning normally. If it doesn't light up or stays on, it means there is a system fault. In this case, you can continue driving at low speed but should avoid sudden braking. 4. The brake system fault light turns yellow when the parking brake is engaged. If this light turns red while driving, it indicates the brake fluid level in the reservoir is too low or there is a fault in the braking system. Immediate inspection is necessary. 5. The tire pressure warning light resembles a stove with an exclamation mark in the middle. When this light illuminates, you should immediately check the car's tire pressure. For most cars, a tire pressure of 2.5 bar is ideal.
16
1
Share

Should You Shift to Neutral at Red Lights with an Automatic Transmission?

When waiting at a red light with an automatic transmission car, you can shift to neutral (N), and if the wait is prolonged, you can also engage the handbrake. Below is an introduction to gear selection while waiting at red lights: Duration for shifting to N gear at red lights: When waiting at a red light, briefly shifting to N gear is generally fine, but leaving it in N gear for extended periods can harm the vehicle, especially the transmission. Keeping the car in D gear while braking at a red light is akin to pressing both the accelerator and brake simultaneously in a manual transmission car. In this scenario, fuel consumption increases, and over time, the torque converter remains under stress for prolonged periods, accelerating wear on components like the torque converter. Avoid shifting to P gear at red lights: You should not shift to P gear while waiting at a red light because engaging P gear without the handbrake can damage certain components; starting from P gear involves cumbersome steps; frequently shifting to P gear can cause gear grinding in the automatic transmission, damaging its bearings. The correct approach is to shift to N gear while braking; when the light turns green, shift to D gear and proceed.
1
3
Share

What is the passing score for the four subjects of the driver's license test?

The full score for each of the four subjects is 100 points. A score of 80 points for subjects two and three, and 90 points for subjects one and four is considered passing. The test selects 50 questions proportionally from the corresponding question bank based on the type of driver's license being tested. For small vehicle licenses, questions are selected from 800 questions, while for large vehicle licenses, questions are selected from 1023 questions. The test questions include animation questions, picture questions, scenario recognition questions, and text-based questions. The test duration is 30 minutes, and answering 6 questions incorrectly will terminate the test and result in a failing grade. For multiple-choice questions in subject four, points will be deducted for both over-selecting and under-selecting answers, and these will be treated as incorrect answers. For multiple-choice questions, all correct answers must be selected; over-selecting or under-selecting will result in no points being awarded.
19
4
Share

How to Activate Electronic ETC?

ETC Activation: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth On'. If 'Tag Invalid' appears when inserting and removing twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can directly press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click 'Device Connection' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete activation. Installation is not mandatory. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Cost-saving: Reduces expenses by minimizing vehicle start-up and braking frequency, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC Works: Through dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at toll stations, computer networking technology is used for backend settlement processing with banks. This enables vehicles to pass through highway or bridge toll stations without stopping while paying the required fees.
2
0
Share

Where is the production location of the Dorcen G70s?

The Dorcen G70s is produced in China, with main production bases located in Jiangsu and Jiangxi. The Dorcen G70s is a mid-to-large-sized SUV, with a body length of 4764 mm, width of 1942 mm, height of 1672 mm, and a wheelbase of 2850 mm. The vehicle features front-engine, front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension of multi-link independent suspension. The Dorcen G70s is equipped with a "2.0T+8AT" powertrain combination. The 2.0T engine, now widely used in vehicles, is the "4G63S4T" produced by Shenyang Aerospace Mitsubishi. It delivers a maximum power of 130 kW (177 hp)/5500 rpm and a maximum torque output of 250 Nm/2400-4400 rpm.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.