How to Open the Front Hood of the Binyue?
3 Answers
The method to open the front hood of the Binyue is as follows: Pull the handle located at the lower left side in front of the driver's seat by hand, and the front hood will open slightly. Then, release the handle in the middle of the front hood and lift it upwards. Below is an introduction to the Geely Binyue: 1. The Geely Binyue is a compact SUV product based on Geely's BMA global modular architecture, equipped with richer technological configurations and an engine co-developed with Volvo. 2. The "Bin" series is a new series created by the Geely brand to cater to young consumer groups. The sports version features a flatter black logo, sharper fog lights, and an outwardly protruding carbon fiber-like front lip, further enhancing the sporty feel. 3. The Binyue is equipped with the ICC Intelligent Navigation System, including TJA Traffic Jam Assist and LKA Lane Keeping System, which can maintain the lane at all times and achieve intelligent following, stopping, and turning.
Opening the hood of the Bin Yue is actually quite easy. I've been driving this car for several years and always do it this way when performing maintenance myself. First, sit in the driver's seat, park the car on level ground, turn off the engine, and engage the parking brake. There's a small lever below the steering wheel or near your left foot—just pull it gently upward, and you'll hear a click. Then, get out of the car, walk to the front, crouch down, and look under the center of the hood. You'll find a safety latch; push it sideways with your finger while lifting the hood with your other hand. If the hood doesn't budge, don't force it—there might be dust or ice buildup. In that case, apply a bit more pressure around the latch area. Safety first: avoid touching hot engine parts directly to prevent burns. Regularly checking fluids and other components yourself saves time and money. Keep a small flashlight handy for dimly lit areas. In short, just follow the steps, and you'll get it right.
When I first started driving the Bin Yue, I was quite nervous, afraid of making mistakes. The method is to first find the small handle under the driver's seat, located to the left of the steering wheel, and pull it. Then immediately get out of the car, squat in front of the vehicle to find the small switch under the hood, usually in the middle, push it and then slowly lift the hood. Remember to turn off the engine and ensure the car is stationary, otherwise accidents may occur. The first time I opened it, I didn't pay attention to safety, and the hood almost fell, luckily no one was hurt. Now, I always check the lubrication of the latch before opening it to reduce jamming. After practicing this process a few times, it becomes easy, even for beginners. Simply put, it's a combination of the interior lever and the exterior switch operation.
