How to Open the Front Hood of Great Wall Haval H6?

3 Answers
HaydenAnn
07/28/25 7:58pm
The method to open the front hood of the Great Wall Haval H6 is as follows: 1. Open the car door and enter the driver's seat; 2. Locate the hood release lever on the lower left side; 3. Lift the hood release lever upwards to open the hood. The dimensions of the Great Wall Haval H6 are: length 4649mm, width 1852mm, height 1710mm, with a wheelbase of 2738mm, a fuel tank capacity of 58 liters, and a trunk capacity of 808 liters. The Great Wall Haval H6 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed automatic transmission.
Was this review help?
12
2
Share
AryaFitz
08/11/25 11:44pm
Opening the front hood (also known as the engine cover) of the Great Wall Haval H6 is actually quite simple. I remember when I first drove this car, I was a bit confused too. You need to start from the driver's seat to find that small handle, located just below your left foot. Feel for a lever-like component, give it a firm pull, and you'll hear a click—the hood will pop open slightly. Then, get out of the car and walk to the front. Look for the latch right in the middle under the front of the car. Some models require manually flipping a small lever or pressing a button to fully lift the hood. When I used to drive long distances, I often needed to check the engine oil and coolant, especially in summer when overheating is more likely. Opening the hood to check the fluid levels was reassuring. After driving the Haval H6 for several years now, I've found that with regular maintenance, it rarely has issues. However, beginners might worry about mishandling, so I recommend practicing a few times or reading the owner's manual to familiarize yourself with the layout. This way, you won't end up struggling for ages and accidentally damaging a fuse.
Was this review help?
16
2
Share
Expand All
LenaMarie
09/30/25 6:26am
As a newbie who just started driving a Haval H6, I also spent some time figuring out how to open the front hood. The method is to first find a pull ring under the left side of the driver's seat and give it a firm pull; then the hood will pop open slightly. You need to walk to the front of the car, locate the small hook, and gently lift or release the latch to fully open it. At first, I thought it would be complicated, but it turned out to be just two simple steps, which is perfect for inexperienced people like me. While learning to drive, I also watched online video tutorials and practiced a few times with the manual until I got the hang of it. When I take my Haval H6 out, I usually check the windshield washer fluid and brake fluid levels. These simple maintenance tasks have helped me avoid minor issues and saved me trips to the repair shop.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the reason for no signal power to the fuel injector?

The reason for no signal power to the fuel injector is that the signal line controlled by the ECU has no control signal. The ignition system should be checked for abnormalities, otherwise the ECU will not provide the fuel injection signal. The following are precautions for fuel injector use: 1. Do not reduce the fuel grade: For gasoline fuel injectors, the fuel grade represents the anti-knock performance of the fuel. Generally, the higher the quality of the fuel injector cleaner, the higher the compression ratio, and the higher the fuel grade required. This is also the focus of work for ternary cleaning shops. 2. Do not intentionally drive at low RPM: Drivers deliberately using low speed and high gear will increase the burden on the engine, and too low RPM will also cause incomplete combustion of the engine, forming carbon deposits. This is something that must be paid attention to when using fuel injector cleaners.
18
1
Share

What does it mean to check the license plate light?

The vehicle's license plate light is malfunctioning and needs to be checked. Get out of the car and check the rear of the vehicle. If the license plate light is not working, it is usually caused by a burnt-out bulb or a short circuit in the wiring. Location of the license plate light: The license plate light is located above the license plate at the rear of the vehicle. Its main function is to illuminate the license plate. The switch for the license plate light is usually integrated with the vehicle's parking lights. When the parking lights are turned on, the license plate light will illuminate, along with the parking lights on both sides of the front and rear of the vehicle, the dashboard lights, and the interior button lights. Relevant regulations: According to the Road Traffic Safety Law of the People's Republic of China, a malfunctioning license plate light on a motor vehicle is considered non-compliant with safety standards and may result in a fine. Before driving, it is essential to check all the vehicle's lights.
9
3
Share

Why does the Verna with small displacement have such high fuel consumption?

High fuel consumption in vehicles is largely related to poor driving habits and the type of roads driven on. Habits like squeezing through gaps whenever possible and overtaking every car in sight can significantly impact fuel efficiency. Additionally, situations like waiting at red lights, traffic congestion, lane changes, and speeding, especially rapid acceleration and sudden stops, can cause substantial wear and tear on the vehicle. It's not necessarily related to engine displacement. Factors affecting fuel consumption include: 1. Engine power and torque: More advanced engines with higher power output don't require heavy throttle input or high RPMs. 2. Transmission technology and matching: This directly determines the efficiency loss in power transmission. 3. Vehicle weight, aerodynamic drag, and tire friction coefficient: Lighter vehicles with lower chassis and better aerodynamics are more fuel-efficient. 4. Driving habits: Gentle acceleration, anticipatory throttle control to maintain speed, fewer sudden brakes, and maintaining a steady speed. This factor alone can cause a 3-liter difference in fuel consumption per 100 km between different drivers of the same car.
9
3
Share

What Causes Severe Jerking in a Car?

Severe jerking in a car may be caused by the following issues: 1. Power supply system: Spark plugs or ignition coils. If the high-voltage spark is weak, causing intermittent poor engine performance, it can result in jerking. 2. Fuel system: Fuel injectors. If the fuel injectors have carbon buildup, minor blockages, or poor atomization, it can easily lead to abnormal fuel injection and cause jerking. 3. Transmission: Impacts, jerking, or gear hunting are usually caused by a damaged valve body or dirty transmission fluid with internal impurities. Especially when dirt and impurities accumulate inside the valve body, blocking the pipelines, it can prevent effective regulation of oil pressure, leading to jerking, impacts, or slippage. Whether it's an automatic or manual transmission, if the engine mounts or transmission mounts are damaged, they won't provide cushioning when releasing the throttle, causing jerking. 4. Throttle: If the throttle is not cleaned for a long time, excessive carbon buildup can alter the throttle opening angle, resulting in jerking when releasing the throttle.
10
2
Share

What Spark Plugs Are Best for the Langdong?

The best spark plug for the Langdong is the original SILZKR6B10E iridium-platinum model. What are spark plugs made of: Spark plugs mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. What types of spark plugs are there: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs. Spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it's recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
1
0
Share

Will I be penalized for changing a flat tire myself on the highway?

Changing a flat tire yourself on the highway will not result in penalty points, as long as it does not obstruct normal traffic flow. Emergency handling for a flat tire on the highway: When a rear tire bursts, the driver should stay calm, firmly grip the steering wheel with both hands, strive to keep the vehicle moving straight, and decelerate to a stop. If a front tire bursts, the driver should also firmly grip the steering wheel with both hands, ease off the accelerator pedal, and strive to maintain straight-line driving. A front tire blowout is more dangerous, so the driver must make every effort to control the steering wheel and quickly shift to a lower gear. Procedures after a flat tire on the highway: If a vehicle experiences a flat tire on the highway, the driver should immediately turn on the hazard warning lights, check for vehicles behind, and place a triangular warning sign at least 150 meters behind the vehicle. In windy conditions, use a heavy object to secure the warning sign to prevent it from being blown over. Call the emergency number for assistance and also contact your insurance company for support.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.