How to Open the Front Hood of a Volkswagen Car?

1 Answers
DelEvangeline
07/25/25 2:24am
Method to open the front hood of a Volkswagen car: 1. First, open the car door and sit in the driver's seat, then locate the engine switch lever on the left side of the driver's seat. 2. When you hear a click, pull the car engine handle by hand. 3. Check if the engine hood is open. If there is an obvious gap, it means the engine hood is open. 4. Press the safety button to open the engine hood. Then lift the front engine hood, pull up the car lever, and snap the top buckle into the engine hood. Notes: If you are not a professional, do not touch the engine hood, including other objects in the engine compartment, as it may easily cause problems. To close the engine hood, simply remove the hydraulic cylinder of the engine hood and then manually press it to close.
Was this review help?
10
5
Share
More Forum Discussions

What is the tire pressure for the Touran?

The tire pressure for the Touran is 2.3 to 2.5 bar, with a maximum not exceeding 3.0 and a minimum not below 2.1. To check the tire pressure of the Touran, you can use a tire pressure gauge, which is a direct and accurate manual method. It is recommended that owners have service personnel check it during each maintenance or car wash. The Touran is a car born on the Volkswagen PQ35 platform. In terms of body dimensions, its length, width, and height are 4395mm, 1795mm, and 1634mm respectively, with a wheelbase of 2678mm. In terms of interior, the Touran continues Volkswagen's refined style, with beige interiors making the interior space appear large and the riding environment very comfortable.
1
4
Share

What does the car reset button mean?

Car reset refers to resetting the trip mileage, clearing data, and zeroing the trip computer display data. Holding it down for 3 seconds can clear the data. When the ignition switch is turned off, average fuel consumption, average speed, etc. are stored and can be reset to zero using the reset button on the stalk. The car reset button is located on the multifunction steering wheel, and in some models, it is placed on the left side of the driver's seat. The position may vary, but the actual function is the same. The literal translation of reset is 'reset,' and its basic function is to reset the information on the car's dashboard information center, except for the total mileage.
7
0
Share

What causes the clicking sound when braking in a Bora?

The reasons for the clicking sound when braking in a Bora: 1. The car is new or the brake pads have just been replaced. At this time, the sound is normal because the friction has not yet settled in. It will automatically disappear after driving and breaking in for a few hundred kilometers. 2. The sound occurs after being exposed to rain, as most brake pads are made of iron and will rust when wet. The sound will disappear once the rust is worn off. 3. The brake pads may be installed backward or some screws or parts may be missing. 4. The brake pads may be too small or of low quality. Brake pads, also known as brake linings, are critical safety components in a car's braking system. The effectiveness of all braking depends largely on the brake pads.
5
1
Share

Why does the car brake only respond when fully pressed?

When the car brake only responds when fully pressed, it indicates excessive brake pedal free play. There are two main reasons for this phenomenon: 1. If the brake has always performed this way, it may be the result of intentional manufacturer tuning; 2. If a new car's brakes were initially responsive but gradually developed excessive free play over time, this requires attention as it may indicate a brake system malfunction. There are multiple potential causes for increased brake pedal free play, including abnormal brake fluid conditions or worn brake pads. It's recommended to visit a 4S shop for inspection and maintenance to eliminate safety hazards. The car brake system, also known as the automotive braking system, refers to the specialized braking mechanism installed in vehicles to ensure safe driving and improve average speed through technical means.
18
4
Share

What does SUV mean?

SUV stands for Sports Utility Vehicle, which combines the functionality of an off-road vehicle with the ability to drive in urban areas. SUVs are characterized by powerful performance, off-road capability, spacious comfort, and excellent cargo and passenger-carrying functions, typically accommodating 5+2 passengers. In the luxury SUV segment, well-known models include the Cadillac XT5, Audi Q series, BMW X series, Mercedes-Benz G, GLK, ML series, Lexus GX, LX, RX series, among others. The Cadillac XT5 is a luxury SUV from the Cadillac brand, featuring a four-door, five-seat configuration. In terms of dimensions, the Cadillac XT5 measures 4812mm in length, 1903mm in width, and 1680mm in height, with a wheelbase of 2857mm.
6
2
Share

Where is the Reverse Gear Switch Located in a Car?

The reverse gear switch in a car is located on the transmission housing. For automatic transmissions, there is no separate reverse gear switch; it is integrated into the gear position sensor on the shift shaft. The functions of the car's reverse gear are: 1. Engaging the reverse gear allows the car to move backward, facilitating quick turns and U-turns; 2. Disengaging the reverse gear prevents the car from moving backward; 3. Activating the reverse gear switch turns on the reverse lights and activates the reverse radar. The working principle of the reverse light switch: When the reverse gear is engaged, the mechanical mechanism presses down on the switch contacts, closing the circuit, which turns on the reverse lights and triggers the reverse gear alert sound. When the reverse gear is disengaged, the switch contacts spring back, opening the reverse light circuit again.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.