How to Open the Front Hood of a Santana?
3 Answers
Santana front hood opening method: There is a lever on the left side of the driver's footwell. Pulling it will trigger the hood release sound, but the hood won't fully open. You need to insert your hand into the gap, locate the internal switch above the car emblem, and press it to fully open. The Santana measures 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. In terms of power, this vehicle is equipped with a 1.5L naturally aspirated engine across all variants, delivering maximum horsepower of 112hp and peak torque of 145Nm. The engine reaches its maximum power at 6100rpm and peak torque at 4000rpm. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
I remember opening the hood of a Santana was quite simple, learned from DIY car repairs back in the day. First, sit in the driver's seat and locate the release lever near the left footwell—usually a small labeled rod. Give it a firm pull, and you'll hear the hood pop open. Then walk to the front of the car, where you'll find a small latch inside the hood's front gap. Slide your finger in, flip it upward while lifting the hood with your other hand, and secure it with the support rod. Be careful not to do this when the engine's hot to avoid burns. Once open, you can easily check things like engine oil and brake fluid, making maintenance much simpler. The whole process takes less than a minute and feels effortless once you're familiar with it.
As a frequent driver, I believe safety is the top priority. Before opening the hood, ensure the car is parked securely, shifted to P gear, and the engine is turned off. Locate the hood release lever on the driver's side, pull it to release the first lock. Then wait a minute or two for the engine to cool down before moving to the front of the car, where you can feel for the secondary release lever under the hood and flip it to open. The dual-lock design prevents accidental opening while driving. Once open, secure the hood with the support rod to prevent it from closing due to wind or vibration. Always prioritize safety when checking the battery or belts. If it gets stuck, don't force it—consult the manual or visit a repair shop.
