···
Log in / Register

How to Open the Front Hood of a Mercedes-Benz?

4 Answers
DiJake
07/29/25 12:55pm

Method to open the front hood of a Mercedes-Benz: The hood release lever is located on the inner side of the driver's seat, above the clutch pedal, marked with a small red handle. Pull this lever, then feel for a latch under the front hood emblem by sliding your hand upward from below and lifting it to open the hood. The new-generation Mercedes-Benz C-Class has further increased dimensions, with a body length of 4700mm (100mm longer than the current model), a width expanded by 40mm to 1810mm, and a wheelbase extended by 60mm to 2820mm. The new C-Class sedan is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, and rescue tools, ensuring excellent comfort, refinement, practicality, and safety.

Was this review help?
16
5
Share
VictoriaRose
08/14/25 1:51am

I remember it took me a long time to find the handle when I first opened the hood of my Mercedes, but I got familiar with the operation later. Opening the front hood of a Mercedes usually involves two steps: First, locate the small lever or handle under the driver's seat, typically found just below the left side of the steering wheel—just give it a gentle pull. Then, don’t rush; the hood at the front will slightly pop up, and there’s a latch or button in the middle—press it lightly or flip it upward. Once the hood rises, don’t forget to prop up the support rod to secure it and prevent accidental drops. Be careful of burns when the engine is hot; gloves are a great help. After opening, take a moment to check the engine oil level or coolant—make it a habit to confirm these before maintenance to avoid issues on long trips. It’s safer to do this after parking and turning off the engine, and avoid doing it on a slope.

Was this review help?
5
2
Share
Expand All
LeAshlyn
10/09/25 6:45am

Opening the hood of a Mercedes is actually super easy. I learned it by watching a video online and remembered it after just one try. First, locate the handle inside the cabin, usually hidden near the accelerator. Mine was a lever marked with an engine icon by the door—just give it a firm pull. Then, walk to the front of the car where the hood has already popped up slightly. Feel for a hidden latch in the gap, either press it down or flip it upward. Lift the hood with some force but not too aggressively, then secure it on the support rod. Don’t be like my friend who got his fingers stuck—getting burned isn’t fun. Check the belts and battery condition, and remember to open it every few months to clean the fan blades, ensuring cooling efficiency and extending engine life.

Was this review help?
19
5
Share
Expand All
AlexDella
11/22/25 8:01am

As a mom who frequently uses the car, safety comes first when opening the Mercedes hood. Here are the steps: Start by pulling the small lever on the left side of the seat, located near the foot brake, with a gentle single pull. Then, move to the front of the car where you'll find a plastic release handle at the bottom of the hood; press it to disengage the hook. Slowly lift the hood and support it with your hand, then secure it using the provided rod. Ensure children stay away during the entire process, especially as the hood can be dangerous when closing. Once open, take the opportunity to check if the windshield washer fluid is sufficient, and in cold weather, also inspect the antifreeze level. Proper maintenance can reduce breakdowns, making family trips more worry-free.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

How to Remove Moisture from Headlights?

Here are the main methods to remove moisture from car headlights: 1. If the moisture inside the headlight is not too severe, you can purchase a desiccant and place it inside. 2. The most common reason for moisture inside headlights is the aging of the headlight sealing gasket or damage to the headlight caused by a collision in the nearby area, allowing water to enter and produce steam when heated. In this case, you should promptly visit a repair shop to have professionals remove and repair the headlight. Below are the main reasons for moisture in car headlights: 1. Previous headlight modifications, where the headlight was not tightly reinstalled after removal, allowing water to seep in from the sealing gasket. 2. A collision occurred in the headlight area, causing cracks in the headlight or body deformation that affects the headlight's sealing, resulting in gaps. 3. Issues with the rubber sealing gasket in areas such as the dust cover behind the headlight.
5
0
Share

How Often Should the Carbon Deposits in a Jetta Engine Be Cleaned?

Jetta engine carbon deposits can be cleaned once every 20,000 to 40,000 kilometers. The specific cleaning interval should be determined based on factors such as the air environment in which the vehicle is used, the type of engine oil used, the frequency of air filter replacement, and driving habits. Effects of Engine Carbon Deposits: Carbon deposits can clog idle channels, causing the idle control device to stick or exceed its adjustment range. This can lead to low idle speed, idle shaking, malfunction of various auxiliary devices during acceleration, stalling when decelerating, excessive exhaust emissions, and increased fuel consumption. Carbon Deposits: Carbon deposits are a coking-like substance formed during engine operation due to the high-temperature reaction of unsaturated olefins and gums in the fuel. They can accumulate in various parts of the engine, such as the intake and exhaust systems, fuel chamber, and fuel injectors.
11
5
Share

What is the freezing point of Geely Emgrand's original antifreeze?

Geely Emgrand's original antifreeze has a freezing point ≤-40°C, with a usage amount of 6.5L. Geely Emgrand antifreeze replacement cycle: The official recommended replacement cycle for Geely Emgrand antifreeze is once every year. Slowly turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening. The hissing sound indicates that there is still pressure inside, continue turning the pressure cap and remove it. Pour the appropriate amount of coolant into the coolant expansion tank, with the coolant expansion tank cap open, start the engine and let it run, then reinstall the cap. Make sure the pressure cap is hand-tightened and fully seated. Function of antifreeze: It provides anti-corrosion protection for the components of the cooling system, prevents scale formation, and avoids reducing the heat dissipation effect of the radiator; it ensures the engine operates within the normal temperature range.
4
1
Share

Where is the daytime running light fuse of Haval H5?

Haval H5 has two fuse locations: one is located on the side of the glove box on the passenger side, and the other is integrated into the body control module. Method for replacing the light fuse: The fuse box in the cabin is generally located on the side of the dashboard near the door or under the steering wheel. The fuse box in the engine compartment is usually at the edge of the vehicle's engine compartment. With the specific location diagram of the fuse you are looking for, you can refer to the legend to find the actual position of the fuse in the vehicle. Function of the light fuse: Known as a current fuse, it is an electrical component installed in a circuit to ensure safe operation. Also referred to as a fuse, the IEC127 standard defines it as a 'fuse-link'. The fuse will melt and cut off the current when the current abnormally rises to a certain level and reaches a certain temperature, thereby protecting the safe operation of the circuit.
6
0
Share

Why Does the BMW Head-Up Display Make Abnormal Noises?

BMW head-up display abnormal noises are caused by the detachment of the sealing strip between the instrument panel and the windshield, or resonance noises due to low temperatures. Below is more information about the head-up display: Basic Information: The head-up display, abbreviated as HUD, is also called the heads-up display system. It refers to a driver-centered, blind-operation, multi-functional instrument panel. Function: It projects important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to see crucial driving information like speed and navigation without lowering or turning their head. Differentiation: The suspended HUD is fixed on the sun visor above the car driver, and the HUD information will be projected onto the upper area of the windshield. The dashboard-type HUD is fixed on the center console in front of the driver. This arrangement determines that the HUD information will be projected onto the front area of the windshield.
14
1
Share

What is the size of the original Civic wheel rims?

The original wheel rim size of the Civic is 16 inches or 17 inches, and it can be changed to 18 or 19-inch rims. Wheel rim load capacity: Small wheel rims are usually made of steel to save costs, but larger wheel rims are made of aluminum alloy, especially those manufactured through forging processes. The load capacity of these rims is five times that of ordinary steel rims. Large wheel rims reduce ride comfort: Large-sized wheel rims affect ride comfort. Generally, the outer diameter of the tire is a fixed value, meaning the larger the rim, the thinner the tire's thickness. This results in poorer isolation of road noise, leading to increased interior noise and affecting the vehicle's quietness. Large wheel rims improve the vehicle's cornering performance: After modifying the wheel rims, the contact area increases, which enhances the vehicle's stability during cornering.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.